• Textile Coloration and Finishing
• /
• v.11 no.5
• /
• pp.7-12
• /
• 1999

The objective of this study is to apply water repellent and flame retardant finishes simultaneously to the fabric used for automobile. Both two step and one step methods were tried to apply the finishing agent to the fabric. In the two step method, water repellent agent was treated first, and flame retardant agent was applied next. The reverse finishing process was also attempted. In the one step method, flame retardant agent and water repellent agent treated to the fabric in one bath. The results of two step method revealed that the finishing effect was better when the water repellent agent was treated first than when flame retardant agent was treated first. In one step method, fluoro water repellent agent was superior to silicon water repellent agent.

• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.284-290
• /
• 2017

The glyoxal has been used as formaldehyde free DP(durable press) agents in wrinkle free treatment for cotton fabrics. However, the yellowing problem is a disadvantage of DP finishing process for cotton fabrics with glyoxal. In order to improve the whiteness, it was investigated that the effect of coreactant and treatment method with various whitening additives such as STB(sodium tetraborate, $Na_2B_4O_7$), SPB(sodium perborate, $NaBO_3$), SC(sodium chlorite, $NaClO_2$) and SPC(sodium percarbonate, $Na_2CO_3{\cdot}1.5$ $H_2O_2$). The increasing the concentration of whitening additives(STB, SPB, SC and SPC), the whiteness and the strength retention ratio of cotton fabrics were increased but the wrinkle recovery angles were decreased in one bath method. It was not suitable to improve whiteness because the whiteness value is about 60. In the case of SC used two bath method, the whiteness is near 70, which is similar to untreated fabrics, without decreasing of WRA and strength.

• Journal of Technologic Dentistry
• /
• v.42 no.2
• /
• pp.113-120
• /
• 2020

Purpose: This study is to compare and analyze the shrinkage of the specimen after UV irradiation of UV cured resin at 5, 15, and 30 minutes. Methods: A cylindrical UV cured specimen was produced using a stainless steel mold. UV cured resin specimens were prepared in three groups: 5 minutes cured (5M), 15 minutes cured (15M), and 30 minutes cured (30M). The measurement was made in total 3rd. The measurement was made in total 3rd. The primary measurement was made after 24 hours using a digital measuring instrument. The 2nd and 3rd measurements were deposited in a constant temperature water bath and the shrinkage was measured. The measured data was calculated by referring to the ASTM C326 linear measurement calculation method. T-test and One-way ANOVA were performed to test the significance between groups. The post-test was conducted with Tukey (α=0.05). Results: When the inner diameter and the outer diameter of the three groups not placed in the water bath were compared and analyzed, the contraction was the smallest at 6.8% in the 5M group, and the contraction was the largest at 7.3% in the 30M group. In the outer diameter, the contraction of the 5M group was the smallest at 3.5%, and the contraction of the 30M group was the largest at 4.5%. Shrinkage decreased in all three groups immersed in a water bath for 3-7 days. Conclusion: In the UV cured resin specimen, the shrinkage increased as the amount of UV irradiation increased.

• Corrosion Science and Technology
• /
• v.10 no.2
• /
• pp.43-46
• /
• 2011

Zinc consumption in a continuous galvanizing line is one of the highest operating cost items in the facility and minimizing zinc waste is a key economic objective for any operation. One of the primary sources of excessive loss of zinc is through the formation of top dross and skimmings in the coating pot. It has been reported that the top skimmings, manually removed from the bath, typically consist of more than 80% metallic zinc with the remainder being entrained dross particles ($Fe_2Al_5$) along with some oxides. Depending on the drossing practices and bath management, the composition of the removed top skimmings may contain up to 2 wt% aluminum and 1 wt% iron. On-going research efforts have been aimed at in-house recovery of the metallic zinc from the discarded top skimmings prior to selling to zinc recycling brokers. However, attempting to recover the zinc entrapped in the skimmings is difficult due to the complex nature of the intermetallic dross particles and the quality and volume of the recycled zinc is highly susceptible to fluctuations in processing parameters. As such, an efficient method to extract metallic zinc from top skimmings has been optimized through the use of a specialized thermo-mechanical process enabling a continuous galvanizing facility to conserve zinc usage on-site. Also, through this work, it has been identified that filtration of discrete dross particles has been proven effective at maintaining the cleanliness of the zinc. Future efforts may progress towards expanded utilization of filters in continuous galvanizing.

• Advances in nano research
• /
• v.14 no.6
• /
• pp.557-573
• /
• 2023

The rapid growth of zinc-oxide (ZnO) nanostructures (NSs) on woven carbon fiber (WCF) is reported in this study employing a microwave-aided chemical bath deposition process. The effects of different process parameters such as molar concentration, microwave duration and microwave power on morphologies and growth rate of the ZnO on WCF were studied. Furthermore, an attempt has been taken to study influence of different type of growth solutions on ZnO morphologies and growth rates. The surface functionalization of WCF fabrics is achieved by successful growth of crystalline ZnO on fiber surface in a very short duration through one-step microwave synthesis. The morphological, structural and compositional studies of ZnO-modified WCF are evaluated using field-emission scanning electron microscopy, X-ray diffraction and energy dispersive X-ray spectroscopy respectively. Good amount of zinc and oxygen has been seen in the surface of WCF. The presence of the wurtzite phase of ZnO having crystallite size 30-40 nm calculated using the Debye Scherrer method enhances the surface characteristics of WCF fabrics. The UV-VIS spectroscopy is used to investigate optical properties of ZnO-modified WCF samples by absorbance, transmittance and reflectance spectra. The variation of different parameters such as dielectric constants, optical conductivity, refractive index and extinction coefficient are examined that revealed the enhancement of optical characteristics of carbon fiber for wide applications in optoelectronic devices, carbon fiber composites and photonics.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.2
• /
• pp.85-91
• /
• 2009

Microcrystallized cellulose xanthate-metal-oxytetracycline complexes (MCX-metal-OTC) were prepared and evaluated as a controlled release system for the antibiotics. Microcrystallized cellulose (MC) was chemically modified to xanthated microcrystallized cellulose (MCX). One-bath method, where MCX was reacted with OTC-metal complexes, afforded greater amount of OTC bound to the polymeric matrix than did two-bath method, where MCX-metal complexes were treated with OTC. The OTC release from MCX-metal-OTC was greatly sustained compared with that from a mixture of MC/metal/OTC. Furthermore, MCX-metal-OTC manifested antibacterial activity, which lasted for 11-18 days. These results suggest that MCX-metal-OTC is a polymeric antibiotics with prolonged antibacterial activity.

• Journal of Sensor Science and Technology
• /
• v.25 no.1
• /
• pp.65-70
• /
• 2016

We devised a method to control the temperature of a liquid bath as low as $-100^{\circ}C$ using the duty cycle control of a solenoid valve. The solenoid valve controls the flow of liquid nitrogen that we used as a cryogen in this system. By controlling the duty cycle of a solenoid valve using feedback from the measured temperature of the liquid bath, we were able to achieve temperature stability within ${\pm}19mK$ around $-100^{\circ}C$. We also demonstrated that by taking average values of the temperature readings for sequence of measurements from more than one thermometer, it is possible to use this system for the calibration of thermometers within 3 mK. This system and the control method can be used for the precise temperature control in the range between $0^{\circ}C$ and $-100^{\circ}C$, where commercially available precision baths are much expensive and hard to be built in customized configurations.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.88-91
• /
• 2003

미생물의 침해로부터 인체와 섬유제품을 보호하기 위하여 사용되는 항균 가공제로는 아민 또는 제4급 암모늄계, biguanide계, 알코올계, 페놀계, 알데하이드계 등의 유기계, 금속 이온 무기계, 산화물 및 광 촉매계, 유기 무기계, 천연 화합물 등이 있다[1,2]. 이러한 항미생물 가공제는 우수한 살균력, 섬유제품의 고유한 성질을 변화시키지 않는 특성, 탁월한 세탁 내구성, 인체에 대한 무독성 등의 조건을 가져야 한다[2,3]. (중략)

• Microbiology and Biotechnology Letters
• /
• v.46 no.2
• /
• pp.162-170
• /
• 2018

Non-typhoidal Salmonella is one of the main pathogens causing food-borne illness in humans, with up to 20% of cases resulting from consumption of pork products. Over the gastroenteritis signs, multidrug resistant Salmonella has arisen. In this study, pan-susceptible phenotypic strains of Salmonella enterica serotype Weltevreden recovered from pig production chain in Chiang Mai, Thailand during 2012-2014 were chosen for analysis. The aim of this study was to use whole genome sequencing (WGS) data with an emphasis on antimicrobial resistance gene investigation to assess their pathogenic potential and genetic diversity determination based on whole genome Multilocus Sequence Typing (wgMLST) to expand epidemiological knowledge and to provide additional guidance for disease control. Analyis using ResFinder 3.0 for WGS database tracing found that one of pan-susceptible phenotypic strain carried five classes of resistance genes: aminoglycoside, beta-lactam, phenicol, sulfonamide, and tetracycline associated genes. Twenty four and 36 loci differences were detected by core genome Multilocus Sequence Typing (cgMLST) and pan genome Multilocus Sequence Typing (pgMLST), respectively, in two matching strains (44/13 vs A543057 and A543056 vs 204/13) initially assigned by conventional MLST and Pulsed-field Gel Electrophoresis (PFGE). One hundread percent discriminant ability can be achieved using the wgMLST technique. WGS is currently the ultimate molecular technique for various in-depth studies. As the findings stated above, a new of "gold standard typing method era" for routine works in genome study is being set.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.249-252
• /
• 1999

Boriding is one of the chemical method to increase surface hardness as well as carburizing, and nitriding. Gas boriding and boron paste boriding methods were investigated to replace salt bath boriding. Boron paste boriding method is selected due to safety, small waste and low cost. And then boriding is also carried out micro-pulsed PECVD in order to increase efficiency of boriding. Mechanical properties, microstructure, surface concentration, and depth profile of borided layer is investigated by micro-vickers hardness tester, SEM, XRD, and AES.