• 대한안전경영과학회지
• /
• 제18권4호
• /
• pp.131-137
• /
• 2016

In unlimited competition era changed rapidly, productivity improvement and raw cost reduction by working improvement are very important for the survival of middle and small-sized companies. At this moment, middle and small-sized companies are cleary important in domestic industry. Therefore, this researcher applied TPS(Toyota production system) 7 wastes by experiment planning method for wastes of lots of working processes at the manufacturing site of automobile assembly manufacturing company, D company, analyzed current system of D company applied so as to verify if value creation works and factors were minimized during the production and drew results by analyzing experimental planning for analyzing waste elimination.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.202-203
• /
• 2022

In this study, focusing on work types of lifting modules and modules assembly in modular construction sites, unit works were defined according to the construction process of each work type, and safety management elements, safety management activities, and key check point were proposed. The results of this study may have somewhat overlapping contents in the construction procedure in order to derive specific safety management activities and check point for each unit work. Therefore, there is a limit to use the results in an actual modular construction site. In future research, we plan to improve this part and derive a checklist that considers field usability.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.21-22
• /
• 2022

High fluidity concrete has excellent workability, and if the cross-section of the building is complicated, it is possible to place good quality concrete and increase the construction speed, so its utility value is very high. However, it is premised on the accuracy of concrete formwork assembly. Concrete leakage through formwork gaps is an important consideration when applying high flow concrete. In order to quickly solve the leak of high fluidity concrete caused by formwork gap occurring at the site by accelerator injection, we proceeded with research to confirm the possibility of reducing the amount of formwork leakage of high fluidity mortar. It was confirmed that the injection of the accelerator could reduce the amount of mortar leakage.

• BMB Reports
• /
• 제40권5호
• /
• pp.697-707
• /
• 2007

Cytochrome $cbb_3$ oxidase is a member of the heme-copper oxidase superfamily that catalyses the reduction of molecular oxygen to the water and conserves the liberated energy in the form of a proton gradient. Comparison of the amino acid sequences of subunit I from different classes of heme-copper oxidases showed that transmembrane helix VIII and the loop between transmembrane helices IX and X contain five highly conserved polar residues; Ser333, Ser340, Thr350, Asn390 and Thr394. To determine the relationship between these conserved amino acids and the activity and assembly of the $cbb_3$ oxidase in Rhodobacter capsulatus, each of these five conserved amino acids was substituted for alanine by site-directed mutagenesis. The effects of these mutations on catalytic activity were determined using a NADI plate assay and by measurements of the rate of oxygen consumption. The consequence of these mutations for the structural integrity of the $cbb_3$ oxidase was determined by SDS-PAGE analysis of chromatophore membranes followed by TMBZ staining. The results indicate that the Asn390Ala mutation led to a complete loss of enzyme activity and that the Ser333Ala mutation decreased the activity significantly. The remaining mutants cause a partial loss of catalytic activity. All of the mutant enzymes, except Asn390Ala, were apparently correctly assembled and stable in the membrane of the R. capsulatus.

• 한국산학기술학회논문지
• /
• 제13권9호
• /
• pp.3876-3881
• /
• 2012

일반적으로 마스터/슬레이브 원격제어 시스템에서 작업자는 원격에서 슬레이브를 제어하기 위하여 카메라 영상 같은 시각 정보를 이용하는 경우가 많은데, 많은 데이터 양으로 인하여 원격지의 영상 정보에 지연이 발생할 수 있고 카메라 위치에 따라 영상 정보가 제한되거나 불완전하여 제어가 어려운 경우가 생길 수 있다. 카메라 영상을 이용한 원격제어 시스템의 이러한 문제점을 해결하기 위하여 본 논문에서는 영상 정보 대신에 3차원 재구성 그래픽 모델을 이용한 원격제어 시스템을 제안한다. 제안된 원격제어시스템은 로봇 제어 모듈, 힘반향 조이스틱을 이용한 마스터 모듈, 그래픽유저인터페이스모듈로 이루어져 있는데, 여기서 그래픽유저인터페이스모듈은 원격지에서 전달된 적은 양의 센싱 데이터를 이용하여 3차원으로 재구성된 그래픽 모델을 작업자에게 제공해 준다. 제안된 원격제어 시스템은 펙인홀(peg-in-hole) 조립 작업을 이용하여 그 효과가 검증되었다.

• Journal of Radiation Protection and Research
• /
• 제39권4호
• /
• pp.176-181
• /
• 2014

The object of this paper is to evaluate the fission product inventories and radiological doses in a non-LOCA event, based on the U.S. NRC's regulatory methodologies recommended by the TID-14844 and the RG 1.195. For choosing a non-LOCA event, one fuel assembly was assumed to be melted by a channel blockage accident. The Hanul nuclear power reactor unit 6 and the CE $16{\times}16$ fuel assembly were selected as the computational models. The burnup cross section library for depletion calculations was produced using the TRITON module in the SCALE6.1 computer code system. Based on the recently licensed values for fuel enrichment and burnup, the source term calculation was performed using the ORIGEN-ARP module. The fission product inventories released into the environment were obtained with the assumptions of the TID-14844 and the RG 1.195. With two kinds of source terms, the radiological doses of public in normal environment reflecting realistic circumstances were evaluated by applying the average condition of meteorology, inhalation rate, and shielding factor. The statistical analysis was first carried out using consecutive three year-meteorological data measured at the Hanul site. The annual-averaged atmospheric dispersion factors were evaluated at the shortest representative distance of 1,000 m, where the residents are actually able to live from the reactor core, according to the methodology recommended by the RG 1.111. The Korean characteristic-inhalation rate and shielding factor of a building were considered for a series of dose calculations.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.63-74
• /
• 2020

The assembly of modular construction requires a series of thoroughly-considered decisions for crane lifting including the crane model selection, crane location planning, and lift path planning. Traditionally, this decision-making process is empirical and time-consuming, requiring significant human inputs. Recently, research efforts have been dedicated to improving lift planning practices by leveraging cutting-edge technologies such as automated data acquisition, Building Information Modelling (BIM) and computational algorithms. It has been demonstrated that these technologies have advanced lift planning to some degree. However, the advancements tend to be fragmented and isolated. There are two hurdles prevented a systematic improvement of lift planning practices. First, the lack of formalized lift planning workflow, outlining the procedure and necessary information. Secondly, there is also an absence of a shared information environment, enabling storages, updates and the distribution of information to stakeholders in a timely manner. Thus, this paper aims to overcome the hurdles. The study starts with a literature review in combination with document analysis, enabling the initial workflow and information flow. These were contextualised through a series of interviews with Australian practitioners in the crane-related industry, and systematically analysed and schematically validated through an expert panel. Findings included formalized workflow and corresponding information exchanges in a traditional lift planning practice via a Business Process Model and Notation (BPMN). The traditional practice is thus reviewed to identify opportunities for further enhancements. Finally, a BIM-based lift planning workflow is proposed, which integrates the scattered technologies (e.g. BIM and computational algorithms) with the aim of supporting lift planning automation. The resulting framework is setting out procedures that need to be developed and the potential obstacles towards automated lift planning are identified.

• 한국건설관리학회논문집
• /
• 제25권4호
• /
• pp.3-14
• /
• 2024

OSC (Off-Site Construction) 생산방식은 기존의 건설 생산 방식과 달리 생산환경 및 기술에 따른 제약사항들이 다수 존재하기 때문에 이와 같은 제약사항을 고려한 설계안을 개발하고, 건축 생산 과정의 전반적인 효율을 고려한 최적의 설계 대안을 선정하는 것이 중요하다. 이에 건설업계에서는 OSC 프로젝트의 최적 설계안을 도출하기 위해 DfMA (Design for Manufacturing & Assembly)에 주목하고 있다. 싱가포르, 영국 등 OSC 선도국에서는 DfMA 적용의 필요성을 인정하여 OSC 산업 특성에 적합한 DfMA 가이드라인 및 적용 전략을 제시하였으며, 여러 연구자들이 건설업에 DfMA를 융합하는 연구를 진행 중에 있다. 하지만, 국내의 경우에는 DfMA의 산업 적용 및 산업 적용에 대한 필요성은 인식하고 있으나, DfMA의 개념을 실제 건설 프로젝트의 설계에 구현하는데 필요한 방법 및 도구가 부재하다. 이에 본 연구에서는 해외 건설분야 DfMA 개발 및 적용 현황을 분석하여 벤치마킹하고, 전문가 의견 수렴과정을 거쳐서 국내 OSC 산업 발전을 위한 DfMA 적용 및 도구 개발을 위한 전략 수립의 기본 방향을 제시하였다. 본 연구의 결과는 향후 국내 OSC 산업에 적합한 DfMA 도구 개발 및 DfMA 관련 정책 수립의 기초자료로 활용할 수 있을 것이다.

• Journal of Electrochemical Science and Technology
• /
• 제8권4호
• /
• pp.265-273
• /
• 2017

Solid-state alkaline water electrolysis is a promising method for producing hydrogen using renewable energy sources such as wind and solar power. Despite active investigations of component development for anion exchange membrane water electrolysis (AEMWE), understanding of the device performance remains insufficient for the commercialization of AEMWE. The study of assembled AEMWE devices is essential to validate the activity and stability of developed catalysts and electrolyte membranes, as well as the dependence of the performance on the device operating conditions. Herein, we review the development of catalysts and membranes reported by different AEMWE companies such as ACTA S.p.A. and Proton OnSite and device operating conditions that significantly affect the AEMWE performance. For example, $CuCoO_x$ and $LiCoO_2$ have been studied as oxygen evolution catalysts by Acta S.p.A and Proton OnSite, respectively. Anion exchange membranes based on polyethylene and polysulfone are also investigated for use as electrolyte membranes in AEMWE devices. In addition, operation factors, including temperature, electrolyte concentration and acidity, and solution feed methods, are reviewed in terms of their influence on the AEMWE performance. The reaction rate of water splitting generally increases with increase in operating temperature because of the facilitated kinetics and higher ion conductivity. The effect of solution feeding configuration on the AEMWE performance is explained, with a brief discussion on current AEMWE performance and device durability.

• 융합정보논문지
• /
• 제11권9호
• /
• pp.138-144
• /
• 2021

전자부품 조립사업은 제품불량이 발생했을 때, 입고된 원자재불량 또는 작업불량을 추적하는 것이 중요하며, 결과에 따라 납품업체 또는 작업현장 개선이 중요하다. 스마트팩토리의 핵심 과제는 데이터 통합허브를 구축하여 저장·관리·분석을 실시간으로 처리하고 클러스터공정, 에너지, 환경, 안전을 통합관리 하는 것이다. 전자부품 관련 중소기업에 생산현장관리를 실시간 모니터링하여 생산데이터의 정확한 분석과 수집으로 신뢰도를 향상시키기 위해서는 스마트팩토리 구축이 필수적이다. 본 논문은 스마트팩토리를 도입하고자 하는 전자 부품관련 중소기업의 특성을 고려해 시스템 구성방법, 스마트팩토리 관련기술 과 적용사례 등을 정의하여 구축에 활용토록 개발되었다.