• 한국건설관리학회논문집
• /
• 제23권5호
• /
• pp.43-55
• /
• 2022

조립 가설기자재는 본 공사가 시작되기 전 반드시 수행되는 가설공사에 널리 사용되기 때문에, 조립 시 품질확보와 설치 후 운영 시 조립 가설기자재로 인해 발생 가능한 안전사고 예방이 필수적이다. 그러나 현재 대부분의 건설현장 관리자는 조립 가설기자재의 품질관리를 본 공사를 위해 설치 후 해체하는 임시구조물을 관리하는 업무로 인식하고 있는 등 그 중요성을 인지하지 못하고 있는 것으로 조사되었다. 현재 건설현장에서의 조립 가설기자재의 품질관리 업무는 정형화된 절차가 부재하고 이를 수행하는 주체가 불분명하여 건설현장별로 상이한 업무방식에 의해 수행되고 있으며, 설치작업 시 종합건설업체 관리자는 임의의 판단에 의해 점검이 필요한 부분에 대해서만 점검하고 이에 대한 조치사항을 증거자료 없이 전달 및 반영하기 때문에 투명성이 보장되지 못하여 그 결과가 중대재해로 이어지는 문제가 발생하고 있어 이에 대한 개선이 시급한 것으로 분석되었다. 따라서 본 연구에서는 건설현장 내 이해관계자가 조립 가설기자재의 품질확보를 위한 체계적인 품질평가 및 관리 절차를 제공하고, 품질평가 및 관리 업무를 위한 체크리스트를 개발하여 이에 대해 웹(Web)상에서 이력관리를 지원하는 문서 작성 중심의 시스템을 구축하는 데 목적이 있다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.334-339
• /
• 2008

구조물의 70%가 콘크리트 구조인 건축공사는 최근 대형화 고층화에 대한 수요가 점차 증가하고 있는 추세이다. 그러나 3D 업종 기피현상으로 인한 젊은 기술인력의 수급이 어려운 건설현장은 기능공의 노령화 및 부족으로 인한 문제가 발생하고 있는 실정이다. 이러한 문제점에 대한 해결책으로 공기단축, 노무 생산성 향상, 균일품질 확보 노력 등의 관리적 측면의 노력은 현재 여러 곳에서 진행되고 있으나 보다 능동적이고 장기적인 대책으로써 국제 경쟁력 강화 효과가 기대되는 고층 건물의 모듈화 및 자동화 기술 개발 필요성이 증대되고 있는 실정이다. 이에 간 연구에서는 최적 설계 모듈화 기술, 모듈 공장 자동화 및 모듈화 부재의 조립자동화 관련 국내외 선행연구 분석을 통해 도심지 고층 콘크리트 건축물의 시공 생산성 및 품질향상이 가능한 고층 콘크리트 구조물 모듈화 시공 시스템에 대한 기초연구로써, 4단계의 연구개발 전략을 제시하여 보다 적극적인 초고층 건설 시공기술 R&D 투자를 위한 로드맵을 제안하고자 한다.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권4호
• /
• pp.257-262
• /
• 2019

Lattice steel towers for overhead transmission lines have been replaced by tubular steel poles due to the visual impact of large and complex shape of truss type. Demand for tubular steel poles consisting of a single frame member continues to grow because of its advantages such as visual minimization, architectural appeal and minimal site consumptions. However, there are some constraints on the transportation and construction. As the diameter of tower base has been enlarged, it may exceed minimum height limit required to pass the tunnel in case of land transportation. Also, in a narrow place where it is not easy to secure the installation areas such as mountainous places, there might be some areas wherein it must secure a wide working space so that large vehicles and working cranes will be allowed to enter. In this paper, we presented a vertical separated tubular steel pole, which is a new type of support that can be implemented for general purpose such as mountainous areas or narrow areas to improve the issues raised by breaking away from the conventional design and fabrication methods. Technical approaches for overcoming the limit of the cross-sectional size is to separate and modularize the cross-section of the tubular steel pole designed with a size that cannot be carried or assembled, and to lighten it with a weight capable of being transported and assembled in a narrow space or mountainous area. As a result of this research, it will be possible to enter small and medium sized vehicles in locations where it is restricted to transport by large-sized vehicles. In the case of mountainous areas, it will be possible to divide it into a weight capable of being carried by a helicopter and it will be easy to adjust and fabricate it with individual modules. Furthermore, in order to break away from the traditional construction method, we proposed the equipment that can be applied to the assembly of Tubular Steel Pole without using a large crane in locations where there is no accessible road or in locations wherein large cranes cannot enter. In particular, this paper shows the movable assembling equipment and some methods that are specialized for vertical separated tubular steel pole consisting of members with reduced weight. The proposed assembly equipment is a device for assembling the body of the Tubular Steel Poles. It will be installed inside the support and the modules can be lifted by using the support itself.

• 대한환경공학회지
• /
• 제39권12호
• /
• pp.698-705
• /
• 2017

전과정평가 기법을 적용하여 재생 플라스틱을 사용한 휴대폰 충전기의 전과정 환경영향을 정량화하고, 신재 플라스틱과 재생플라스틱의 환경영향을 비교하였다. 충전기의 제조전, 제조, 유통, 사용 및 폐기를 포함하는 전과정 단계별로 자원고갈, 산성화, 부영양화, 지구온난화, 오존층고갈, 광화학산화물생성 환경영향을 분석하였다. 자원고갈 및 지구온난화 영향범주에서는 충전기의 사용단계 환경영향이 각각 94.4%, 70%를 차지하여 가장 큰 환경영향을 나타냈고, 그 외 영향범주에서는 제조전단계의 환경영향이 98% 이상을 차지하였다. 사용단계의 경우 충전기에 의해 소모되는 전력이 주요 원인이고, 제조전단계 경우 PBA (Printed Board Assembly)와 외장 Case 제조공정이 주요 원인이었다. 외장 Case에 사용되는 재생 PC (Polycarbonate)의 환경개선 효과를 정량화하기 위해 재생 PC와 신재 PC 각 1 kg 생산할 때의 환경영향을 평가하였다. 재생 PC는 신재 PC 대비 자원고갈영향은 30% 수준이며 다른 영향범주에서는 5% 미만으로 잠재적인 환경개선효과가 큰 것으로 분석되었다. 연구에 활용된 주요 데이터 및 가정에 대해 민감도 분석을 수행하였고, 총 12개 항목 분석결과 모든 항목에서 민감도는 10% 미만으로 도출되어 연구 결과의 신뢰도는 높다고 판단된다. 이 연구결과를 통해 충전기의 친환경성 개선을 위해서는 PBA의 소형/경량화 설계, 충전효율의 개선, 재생플라스틱 사용 확대가 전과정 환경영향을 줄이는데 중요한 설계 인자임을 확인하였다.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1995년도 제3회 추계심포지움
• /
• pp.107-113
• /
• 1995

Basement membrane laminin is a multidomain glycoprotein that interacts with itself, heparin and cells. The distal long arm plays major cell and heparin interactive roles. The long arm consists of three subunits (A, B1, B2) joined in a coiled-coil rod attached to a terminal A chain globule (G). The globule is in turn subdivided into five subdomains (Gl-5). In order to analyze the functions of this region, recombinant G domains (rG, rAiG, rG5, rGΔ2980-3028) were expressed in Sf9 insect cells using a baculovirus expression vector. A hybrid molecule (B-rAiG), consisting of recombinant A chain(rAiG) and the authentic B chains (E8-B)was assembled in vitro. The intercalation of rAiG into E8-B chains suppressed a heparin binding activity identified in subdomain Gl-2. By the peptide napping and ligand blotting, the relative affinity of each subeomain to heparin was assigned as Gl> G2= G4> G5> G3, such that G1 bound strongly and G3 not at all. The active heparin binding site of G domain in intact laminin appears to be located in G4 and proximal G5. Cell binding was examined using fibrosarcoma Cells. Cells adhered to E8, B-rAiG, rAiG and rG, did not bind on denatured substrates, poorly bound to the mixture of E8-B and rG. Anti-${\alpha}$6 and anti-${\beta}$1 integrin subunit separately blocked cell adhesion on E8 and B-rAiG, but not on rAiG. Heparin inhibited cell adhesion on rAiG, partially on B-rAiG, and not on E8. In conclusion, 1) There are active and cryptic cell and heparin binding activities in G domain. 2) Triple-helix assembly inactivates cell and heparin binding activities and restores u6131 dependent cell binding activities.

• 산업경영시스템학회지
• /
• 제45권2호
• /
• pp.37-47
• /
• 2022

The Act on the Punishment of Serious Accidents to Prevent Large-scale Disasters, including Ferry Sewol and Taean Thermal Power Plant, passed the National Assembly on January 8, 2021, and has been in effect since January 27, 2022. However, the law, in which the representative of the headquarters is unlimitedly responsible for each worker's accident, is somewhat unreasonable at a time when a company owns dozens to hundreds of construction sites due to the nature of the construction industry. I agree with the purpose of enacting the law to reduce chronic serious accidents at construction sites, but it is necessary to carefully reconsider the implementation of the law in that punishment alone cannot achieve industrial safety. Previous studies focused on revising the Occupational Safety and Health Act, but there are few studies on the impact on the construction industry after the implementation of the Serious Accident Act. Therefore, this study attempts to derive problems related to the application of the Serious Accident Act and present improvement measures. To this end, after analyzing previous studies, SWOT analysis was performed by applying the Delphi method to derive strengths, weaknesses, opportunities, and threats. In addition, the results of two surveys of safety experts such as public institutions, academia, and companies were reflected, and its countermeasures were presented as follows. S/O strategy: establishing on-site execution capabilities of health and safety management system; W/O strategy: expanding legal and system execution checks; S/T strategy: establishing a risk response system; W/T strategy: expanding consulting by external specialized institutions

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.78-80
• /
• 2014

Silicone structural glazing (SSG) is a method utilizing a silicone adhesive to attach glass, metal, or other panel material to the structure of a building. Windload and other impact loads on the facade are transferred from the glass or panel through the silicone structural sealant to the systems' framework. Silicone structural glazing systems are currently a very common method of glazing throughout the world. Locally, structural silicone glazing has become very common to achieve aesthetically pleasing and high utilization of small land for both residential and commercial building. Although structural silicone glazing has been utilized for approximately thirty years in Korea, the understanding of its technology was low and limited. Consequently, Korean projects experienced many quality issues during assembly and construction, even in very recently finished buildings. Adhesion loss and water infiltration occurred on more than one project, and the time and cost to repair these issues were substantial. In general, there are two kinds of structural silicones depending on fabrication methods. 1part structural silicone is for site glazing system and 2part structural silicone is for unitized factory glazing system. In this paper, 2part structural silicone which is very common for factory fabricating curtainwall systems was evaluated with regards to various mixing ratio. Since the structural performance of 2part sealant can be affected by mixing ratios, some extra ranges of recommended mixing ratio were evaluated to see any performance differences. Besides on cure profile, comparative evaluations for mechanical properties and adhesion develop on common building substrates were conducted.

• 성인간호학회지
• /
• 제22권3호
• /
• pp.260-270
• /
• 2010

Purpose: The main question is systematic review of the published in Korea and foreign countries on warming therapy for surgical patients. Methods: The researchers searched at Medline, CINAHL, KERIS, Adult Nursing Association, Korean Society of Nursing Science, Korean Academy of fundamentals of Nursing, and National Assembly Library web site for the published on warming therapy for surgical patients from 1980 to 2008. Words for search were operation/surgery, warming, operation/surgery and warming. Studies were included randomized controlled trial, and there were no restrictions regarding operative phase and outcome measures. Results: 36 published researches that met the criteria were mostly published in foreign countries between 2000 and 2008 and focused on surgery with general anesthesia. Sample size ranged from 21 to 60 subjects, age range between 21 and 60 years of age. Thirty different warming therapies were reported, fifty-two different dependent variables. Outcome indicators included active external warming, intra-operative, and body temperature. 'Positive effects' and 'no effects' equaled. The most frequently reported 'positive effects' were body temperature, shivering, and acid-base balance. No effects were more likely to be heart rate, blood pressure, and hemodynamics. Conclusion: Many types of warming therapy, are reported in the literature with little information about the efficacy of each, many different dependant variables were studied. There were no consistent reports as to length of time used for warming procedures. Overall, the effects of warming therapy are inconsistent. And additional research must be down before any particular method of warming can be used with confidence as to its effectiveness. Attention must be made as to the research design, better measurement of the dependent variables. This review may serve as a base.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.95-104
• /
• 2005

Statement of problem. Higher stresses at the cervical bone around dental implants have been seen as a primary cause of the bone resorption at the site. Purpose : To determine the possibility of stress reduction by assembly of different abutment and implant in diameters. Material and methods. Abutments of several different diameters assembled on the top of XiVE$^{(R)}$ implants were axisymmetrically modeled for a series of finite element analyses. Abutments of 3.4, 3.8, 4.5, and 5.5 mm diameters were assumed to be sit on implants of the same or bigger diameters. All the abutments with an exception of 3.4mm dia, are technically possible to be assembled on bigger implants. Main consideration was given to the stresses at the cervical cortical bone induced by loads of parallel to the implant axis. Results and conclusions. 1. Higher stresses were observed at the cervical area of all the models of the same diameters of abutment and future. The peak stresses, which were shown to be a function of the fixture diameter, were from 1-1.85MPa. 2. Difference in the diameters of the abutments and the implants actually reduced the cervical bone stresses. 3. Downsizing of the abutment by one step resulted in 0.1MPa (5%) reduction of the stresses. In light of the relatively lower bone stress, however, this amount of stress reduction was decided to be biomechanically insignificant.

• 한국콘텐츠학회논문지
• /
• 제22권2호
• /
• pp.147-161
• /
• 2022

본 연구는 2000년 이후 시게루 반이 설계한 대표적인 임시전시관 3곳과 상설전시관 3곳을 대상으로 반의 전시공간의 생태적 특성과 디자인 특성에 대한 변화를 고찰하였다. 생태건축에 관한 개념 및 특성, 전시공간의 디자인 특성 등에 대한 문헌고찰을 통해 전시공간의 디자인 특성과 생태건축의 디자인요소에 대한 분석틀을 도출하였다. 연구 결과 건축규모, 공간구성, 기능, 재료 및 기술 측면에서 임시전시관과 상설전시관 사이에 큰 변화가 있다. 시게루 반의 임시전시관은 재활용 가능한 재료로 종이튜브, 컨테이너 등을 현장에서 전시 위주의 단층 공간으로 조립해 조립방법이 단순하고 공기가 짧아 전시회가 끝난 후 전시관이 철거되어 그 재료가 다음 전시장으로 옮겨지거나 재활용됐다. 한편 상설전시관은 철근콘크리트를 주체로 하고 목재와 유리재료를 다량으로 사용해 전시공간과 휴게공간을 분리시킨 다층 복합문화공간을 조성했다. 또한 시게루 반의 전시관을 영구건축으로서 친환경적인 재료와 혁신적인 구조기술, 기후설계 개념을 적용하는 등 지속가능한 건축을 실현하고 있다. 생태적 특성 측면에서 임시전시관은 건축자재를 모두 재활용할 수 있어 철거 후 산업폐기물이 발생하지 않았다. 상설전시관은 지붕, 벽면 등에 친환경 목재를 사용해 교체와 보수가 용이하며 두 가지 유형의 전시관은 모두 자연채광과 환기를 통해 자원과 에너지를 절약을 등 생태적 건축을 보다 지속가능한 방향으로 변화시켜 가고 있다.