• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.319-327
• /
• 2016

Purpose: Automated guidance systems (AGSs) for mobile farm machinery have several advantages over manual operation in the crop production industry. Many researchers and companies have tried to develop such a system. However, it is not easy to evaluate the performance of an AGS because there is no established device used to evaluate it that complies with the ISO 12188 standard. The objective of this study was to develop a tracking sensor system using five laser distance measurement sensors. Methods: One sensor-for long-range distance measurement-was used to measure travel distance and velocity. The other four sensors-for mid-range distance measurement-were used to measure lateral deviation. Stationary, manual driving, and A-B line tests were conducted, and the results were compared with the real-time kinematic differential global positioning system (RTK-DGPS) signal used by the AGS. Results: For the stationary test, the average error of the tracking sensor system was 1.99 mm, and the average error of the RTK-DGPS was 15.19 mm. For the two types of driving tests, the data trends were similar. A comparison of the changes in lateral deviation showed that the data stability of the developed tracking system was better. Conclusions: Although the tracking system was not capable of measuring long travel distances under strong sunlight illumination because of the long-range sensor's limitations, this dilemma could be overcome using a higher-performance sensor.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.29 no.2
• /
• pp.69-75
• /
• 2023

Purpose: This study examined the distance between the coracoid process and the humeral head using an ultrasonography device when shoulder active contraction were applied according to the guided direction in the end range of shoulder mobilization. This study aims to provide essential data on treating shoulder disease patients. Methods: The subjects of this study were 20 adults with healthy shoulder joints. ultrasonography (US) equipment was used to examine shoulder joint mobilization under two conditions: (1) anteroposterior (AP) joint mobilization and (2) superoinferior (SI) joint mobilization. Shoulder active contraction was assessed in the end range. The distance between the coracoid process and the humeral head was measured. A linear probe was used for US; the frequency was set to 7.5MHz, and the US image display method was set to B-mode. The US measurement values were measured in (1) the starting position, (2) the end range position, and (3) the end range position of the shoulder active contraction, and the moving distance was drawn in a straight line through the US image. The distance was determined as the measurement value, and the average values were compared. Reults: The results were as follows: (1) the measured AP Joint mobilization increased by an average of .52cm from the end range of the joint mobilization with shoulder active contraction; (2) the measured SI Joint mobilization increased by an average of .49cm from the end range of the joint. Conclusion: When shoulder mobilization is applied, the distance between the coracoid process and the humeral head increases when muscle contraction occurs through shoulder active contraction in the end range, according to the therapist's guidance. Therefore, shoulder mobilization combined with shoulder active contraction is an effective treatment method for patients with shoulder injuries.

• Korean Journal of Childcare and Education
• /
• v.14 no.4
• /
• pp.63-83
• /
• 2018

Objective: The purpose of this study was to analyze how the elements and principles of fine arts were reflected in art related activities in the teacher's manual on standard childcare curriculum for a period of 2 years. Methods: The analysis criteria for the elements of fine arts were modified and complemented based on Kim and Gang(2011) and the same was done for the principles of fine arts based on Lee et al(2015). Results: First, as a result of analyzing the art contents according to life theme in art related activities, 'artistic expression' appeared the most in all nine life themes. Second, as a result of analyzing the art related contents in the standard childcare curriculum for 2 years based on the elements of fine arts, plane, texture, shape, color, volume, line, spot, space, composition, light and shade appeared in order. Third, as a result of analyzing the art related contents on the principles of fine arts, movement, emphasis, variety, unity, rhythm, proportion, balance and pattern appeared in order. Conclusion/Implications: The results of this research suggest that the childcare activities have to be devoloped in order to provide the balanced experiences with fine arts activities.

• Journal of Korean Medicine Rehabilitation
• /
• v.28 no.4
• /
• pp.89-101
• /
• 2018

Objectives To understand current status of clinical practice patterns on Korean Medicine treatment practice of traffic injury patients by 2nd on-line survey for developing Korean Medicine treatment clinical pratice guideline (CPG) for traffic injuries. Methods A revised questionnaire about current practice patterns of Korean Medicine treatments for traffic injuries was distributed by e-mail survey to 19,385 respondents of Korean Medicine doctors from May 21th in 2018 to June 21th in 2018. All data were statistically analysed. Results The response rate was 3.5%. Most of the respondents felt necessity of the development of Korean Medicine CPG for traffic injuries. The results showed the detailed usage and trend of current Korean Medicine treatment such as acupuncture, pharmacopuncture, moxibustion, Chuna manual therapy, cupping, Korean Medicine physiotherpy for traffic injury patients. Conclusions This survey helps to determine current Korea Medicine treatments' clinical practice patterns for traffic injury patients. All data from the survey will provide basic data for future clinical studies and adaptation for the revision of Korean Medicine CPG for traffic injuries.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.1
• /
• pp.108-114
• /
• 2021

AVTE(Air Vehicle Test Equipment) is a device to check status of on-board aircraft equipment before and after flight for performing successful UAV(Unmanned Aerial Vehicle) missions. This paper describes software design and test sequence of the AVTE for enabling easy-manual check by the operator and convenient automatic check of on-board electric equipment respectively. The proposed AVTE inspects BIT(Built-In Test) results of on-board LRUs(Line Replacement Units) including avionics and sensor sub-system devices. Also, it monitors all the LRU status and check the normality of aircraft equipment by means of setting specific values of the LRUs and confirming the expected test results. The AVTE prints the test results as a form of report to easily check the normal conditions of the aircraft equipment and operates automatically without operator interaction, thus being thought to effectively reduce workload of the operator.

• Journal of Korean Library and Information Science Society
• /
• v.12
• /
• pp.61-96
• /
• 1985

The human subject analysis of a document has some critical problems. The method results in the inconsistency in analysis process and the contradiction of two objects of the subject analysis (one is the identification of the content for the retrieval of specific items and the other is to identify the content for the grouping of related materials). Since the subject analysis by mechanized has been recognized to be the possible way to aggregate the problems of manual analysis, various a n.0, pproaches of automatic indexing have been studied and experimented. This study is to examine the automatic indexing as one of the promising subject analysis techniques by statistical, syntactical and semantic a n.0, pproaches. In conclusion, the reasonable a n.0, pplication time of the automatic indexing should be made a decision based on the through investigation on the cost verse effectiveness, and automatic indexing system should be developed in the close relationship with the on-line search which is a good retrieval system for information explosion society. From now on, since the machine-readable document-text will be envisaged to be more and more available due to the rapid development of computer technology, the more substantial research on the automatic indexing will be also possible, which can bring about the increasing of practical automatic indexing systems.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.45-50
• /
• 2005

This paper proposed an efficient manufacturing system using the OMM (on-machine measurement) system. The OMM system is software-based 3D modeler for inspection on machine, and it is interfaced with machine tools via RS232C. The software is composed of two inspection modules; one is touch probe operating module, and the other is laser displacement sensor operating module. The module for touch probe needs the inspection feature extracted from CAD data. The touch probe moves to workpiece by three operating modes as follows: manual, general and automatic mode. The operating module of the laser displacement sensor is used to inspect profiles and very small holes. An advantage of this inspection method is the ability to execute on-line inspection during machining or afterward. The efficiency of proposed system which can predict and define the machining errors of each process was verified, so the developed system was applied to inspect a mold-base (cavity, core).

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.122-125
• /
• 2008

Generally, in shipbuilding, large curved block components which have large curvature radius along various directions are used for huge ships such as LPG-vessel and oil tanker ships. Lots of the blocks are manufactured by line heating method which uses a heat source to bend the thick plate materials. The conventional forming process is entirely dependent on the experience of experts because it is done by manual method thus the curvatures and qualities are not uniform even for same part. However, it is hard to adopt the press forming process using die tool sets fur the manufacturing because of the characteristics of the industry that based on the small quantity and variety in the products. In this study, flexible forming technology using numbers of punches is investigated based on the simulation to substitute for the conventional forming method. Thick plate material model was applied to the proposed process to verify the feasibility for hull structure block forming process. The press forming processes were simulated by adopting the explicit-to-implicit sequential solution. Moreover, experiment of the flexible forming process was also conducted and its results were compared with that of simulation.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1998.10a
• /
• pp.407-410
• /
• 1998

Configuration is a set of building block processes, a series of selection and combining parts or components which composes a whole thing. A whole thing could be such a configurable object as manufacturing product, network system, financial portfolio, system development plan, project team, etc. Configuration problem could happen during any phase of product life cycle: design, production, sales, installation, and maintenance. Configuration has long been one of cost and time consuming work, because only high salaried technical experts on product and components can do configuration. Rework for error adjustments of configurations at later process causes far much cost and time, so accurate configuration is required. Under the on-line electronic commerce environment, configuration problem solving becomes more important, because component-based sales should be done automatically on the merchant web site. Automated product search, order placement, order fulfillment and payment make that manual configuration is no longer feasible. Automated configuration means that all the constraints among components should be checked and confirmed by configuration engine automatically. In addition, technical constraints and customer preferences like price range and a specific function required should be considered. This paper gives an brief overview of configuration problems: characteristics, representation paradigms, and solving algorithms and introduce CRSP(Constraint and Rule Satisfaction Problem) method. CRSP method adopts both constraint and rule for configuration domain knowledge representation. A survey and analysis on web sites adopting configuration functions are provided. Future directions of configuration for EC is discussed in the three aspects: methodology itself, companies adopting configuration function, and electronic commerce industry.

• Journal of International Academy of Physical Therapy Research
• /
• v.8 no.2
• /
• pp.1201-1205
• /
• 2017

The purpose of this case study was to investigate the effects of thoracic mobilization and manipulation on a patient with upper thoracic pain. The subject had been complaining of upper thoracic pain for the last 4 months. On the X-ray, T3 and T4 spinous process were located on the left side of the vertical axis. First, transverse mobilization was applied from left to right at the T3-T4 and then thoracic manipulation was performed. The intervention methods of mobilization and manipulation were based on the concept of Maitland manual therapy. The subject underwent a total of 20 sessions (five times per week for four weeks). The thoracic pain and vertebral rotation angle were measured to examine the effect of the intervention. The thoracic pain score decreased (from 4.0 to 1.5) and the angle of thoracic vertebral rotation decreased (from $70{\underline{\circ}}$ to $4.0{\underline{\circ}}$). These results suggest that applied mobilization and manipulation in patients with a primary complaint of thoracic pain decreasing the thoracic pain and vertebral rotation angle.