• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.433-439
• /
• 2001

An experimental study was carried out on the characteristics of the mixed-convection heat transfer from a protruding heat source module which had uniform heat flux and was located on a flat plate in the inclined channel. The effects of the inclined channel(${\varphi}=0{\sim}90^{\circ}$) was studied for the input power($Q=3,\;7W$) and inlet air velocities($V_{i}=0.1{\sim}0.9m/s$). Experimental results indicate that the input power was most effective parameter on the temperature differences between inlet air and module. The effects of the inclined angle was negligible when the inlet velocities were above 0.5m/s and 0.9m/s at Q = 3W, 7W respectively. As the inclined angle of the channel increases, the temperatures of the module are decreased. So we obtained the best condition on the adiabatic board at the vertical channel.

• Journal of Acupuncture Research
• /
• v.23 no.1
• /
• pp.217-223
• /
• 2006

Objectives : To see if Clinical study on 1 Case of patient with the foot drop diagnosed as peripheral neuropathy suggest further treatment plan for more effective cure. Methods : To heal foot drop diagnosed as peripheral neuropathy using herbal medicine wooseul-tangkami and electronic acupuncture on the Yangmyung channel(陽明經) selected in The Yellow Emperor's of internal Medicine and on Panggwang channel(膀胱經) considered as painful lesion. Results : we experienced a case of foot drop diagnosed as the peripheral neuropathy the patient was treated by wooseul-tangkami, and electric acupuncture on Yangmyung channel and also Panggwang channel and had a significant improvement in gait ability and the range of motion. Conclusion : Herbal medicine wooseul-tangkami, and electric acupuncture on Yangmyung channel and also Panggwang channel was prescribed in the perpective of oriental medicine when treating foot drop, Wooseul-tangkami is used to remove the wetness-heat evil and had shown significant improvement in gait ability and the range of motion.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.1 s.256
• /
• pp.83-90
• /
• 2007

The present study investigated the effects of channel rotation and bleed flow on heat/mass transfer in a $90^{\circ}$ ribbed square channel. The bleed holes were located between the rib turbulators on the leading surface and those on the trailing surface case by case. The tests were conducted under the conditions of various bleeding ratios (0.0, 0.2, 0.4) and rotation numbers (0.0, 0.2, 0.4) at Re=10,000. The results suggested that heat/mass transfer characteristics were influenced by the Coriolis force, bleed flow and bleed hole location. The heat/mass transfer on the surface with bleed flow was more increased than that without bleed flow but that on the opposition surface was decreased. Those were due to the effects of the tripping flow and the diminution of main flow rate respectively. The results also showed that the heat/mass transfer characteristics were different according to bleed hole location and channel rotation.

• Journal of Broadcast Engineering
• /
• v.21 no.2
• /
• pp.261-267
• /
• 2016

In this paper, Method for the phase distortion compensation timing offset and DC eliminator for the pilot component estimation and removal, transmitted and received signal correlation in the delay scheme DAB interference cancellation based on the same channel for using for estimating the feedback signal based on a between for removal for the timing offset compensation It proposes a repeater. This was applied to the ATSC system. The on-channel repeater of the proposed interference cancellation based on the interference removing capability is improved in interference signal is 20dB greater than the primary transmission signal environment via the return channel estimation and improve performance RFP. Accordingly, it was confirmed by simulation that good signal is sent out with the improvement of the ability of the repeater.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.34-41
• /
• 2008

In this paper, we present an asymptotical analysis of channel capacity of Bell labs layered space-time (BLAST) architectures based on a zero-forcing (ZF) criterion in the sense of signal-to-noise ratio (SNR). We begin by introducing a new relationship related to multi-input multi-output (MIMO) channel capacity. We prove that Diagonal Bell Labs Space-Time (DBLAST) attains the lower bound for MIMO channels when interference nulling is carried out based on the ZF-criterion. An exact closed-form expression for the probability density function of the channel capacity is analyzed. Based on the asymptotic behavior of the channel capacity of each layer, closed-form expressions for the asymptotic ergodic capacity are derived for BLAST. Based on the analysis presented in this paper, we gain an insight on the channel capacity behavior for a MIMO channel. Computer simulation results have verified the validity and accuracy of the proposed analysis for a wide range of antenna array sizes.

• ETRI Journal
• /
• v.40 no.2
• /
• pp.197-206
• /
• 2018

Multiple-input multiple-output (MIMO) systems offer significant enhancements in terms of their data rate and channel capacity compared to traditional systems. However, correlation degrades the system performance and imposes practical limits on the number of antennas that can be incorporated into portable wireless devices. The use of switched parasitic antennas (SPAs) is a possible solution, especially where it is difficult to obtain sufficient signal decorrelation by conventional means. The covariance matrix represents the correlation present in the propagation channel, and has significant impact on the MIMO channel capacity. The results of this work demonstrate a significant improvement in the MIMO channel capacity by using SPA with the knowledge of the covariance matrix for all pattern configurations. By employing the "water-pouring algorithm" to modify the covariance matrix, the channel capacity is significantly improved compared to traditional systems, which spread transmit power uniformly across all the antennas. A condition number is also proposed as a selection metric to select the optimal pattern configuration for MIMO-SPAs.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.10
• /
• pp.1-8
• /
• 2002

C- V method is a means to determine the effective channel length for miniaturized MOSFET's. This method achieves L$_{eff}$ by extracting a unique channel length independent extrinsic overlap length($\Delta$L) at a critical gate bias point. In this paper, we conducted an experiment on two different C-V methods. L$_{eff}$ extracted from experiment is compared with L$_{eff}$ simulated from a two-dimensional (2-D) device simulator, and the accuracy of C-V method for L$_{eff}$ extraction is analyzed.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.315-325
• /
• 2008

In this paper, we first investigate the side channel analysis attack resistance of various FPGA hardware implementations of the ARIA block cipher. The analysis is performed on an FPGA test board dedicated to side channel attacks. Our results show that an unprotected implementation of ARIA allows one to recover the secret key with a low number of power or electromagnetic measurements. We also present a masking countermeasure and analyze its second-order side channel resistance by using various suitable preprocessing functions. Our experimental results clearly confirm that second-order differential side channel analysis attacks also remain a practical threat for masked hardware implementations of ARIA.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.580-584
• /
• 2004

In the present study, an evaluation technology for heating channel layout was investigated in SMC molding system design. Conventional design rules of cooling channel in injection molding process were applied to the present work. Finite element thermal analysis with ANSYSTM was performed to evaluate the temperature distribution of mold surface. SMC mold was manufactured to test the effect of a proposed heating channel layout system on the temperature distribution of mold surface and infrared camera was applied to a measurement of temperature. It was shown that infrared camera application was possible in a measurement of temperature distribution on mold surface.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.4
• /
• pp.288-291
• /
• 2002

We characterize multipath fading channel dynamics at the packet level and analyze the corresponding data queueing performance in various environments. We identify the similarity between wire-line queueing analysis and wireless network per-formance analysis. The second order channel statistics, i.e. channel power spectrum, is fecund to play an important role in the modeling of multipath fading channels. However, it is identified that the first order statistics, i.e. channel CDF also has significant impact on queueing performance. We use a special Markov chain, so-called CMPP, throughout this paper.