• Journal of information and communication convergence engineering
• /
• v.9 no.3
• /
• pp.310-314
• /
• 2011

This paper has presented doping profile dependent threshold voltage for DGMOSFET using analytical transport model based on Gaussian function. Two dimensional analytical transport model has been derived from Poisson's equation for symmetrical Double Gate MOSFETs(DGMOSFETs). Threshold voltage roll-off is very important short channel effects(SCEs) for nano structures since it determines turn on/off of MOSFETs. Threshold voltage has to be constant with decrease of channel length, but it shows roll-off due to SCEs. This analytical transport model is used to obtain the dependence of threshold voltage on channel doping profile for DGMOSFET profiles. Also we have analyzed threshold voltage for structure of channel such as channel length and gate oxide thickness.

• Korean Management Science Review
• /
• v.33 no.4
• /
• pp.77-89
• /
• 2016

Due to recent proliferation of the mobile shopping channels, customers increasingly tend to purchase using online channel while experiencing physical products in offline shops. This phenomenon requires traditional offline retailers to consider integrating online channels. In this study, we propose strategic options for the traditional offline retailers regarding the online channel integration, and provide corresponding decision models to maximize the expected profits. We also investigate how the strategic options vary with the product characteristics, by categorizing the products based on inventory cost, demand uncertainty, and fitness to the online channels. By analyzing numerical examples we illustrate how the best online channel integration strategy should be differentiated depending on the product categories.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.628-646
• /
• 2016

This paper proposes a novel channel assignment scheme that is based on finite projective plane (FPP) theory. The proposed scheme involves using a Markov chain model to allocate N channels to N users through intermixed channel group arrangements, particularly when channel resources are idle because of inefficient use. The intermixed FPP-based channel group arrangements successfully related Markov chain modeling to punch through ratio formulations proposed in this study, ensuring fair resource use among users. The simulation results for the proposed FPP scheme clearly revealed that the defined throughput increased, particularly under light traffic load conditions. Nevertheless, if the proposed scheme is combined with successive interference cancellation techniques, considerably higher throughput is predicted, even under heavy traffic load conditions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.3655-3673
• /
• 2014

Rendezvous is a process of two or more cognitive radio nodes gathering on the same channel at the same time for a negotiation to establish data communications. This paper discusses rendezvous issues in cognitive radio networks. It details why rendezvous is an issue in cognitive radio networks and how rendezvous works. It classifies channel access methods, and details sequence-based channel-hopping methods. It surveys existing works on blind rendezvous and compares the proposed algorithms in terms of the maximum time to rendezvous. This paper discusses the properties that an efficient channel-hopping rendezvous algorithm should have and illustrates common issues in the existing rendezvous methods. It also explains open research issues in the rendezvous area.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.4
• /
• pp.17-24
• /
• 2000

To use the power line as the communication channel, we have analyzed channel characteristics with the noise data and signal attenuation levels measured on power lines per loom. In this paper, channel capacities are calculated in the best or the worst case noise states and signal attenuations on power lines for three kinds of network-topologies. Analyzed the channel capacity by the best and worst conditions, we concluded that the serious factors influenceing on the channel capacity are the length from a transmitter to a receiver and the network topology.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.51-56
• /
• 2013

Even if transmissions through normal channel between ubiquitous devices and terminal readers are encrypted, any extra sources of information retrieved from encrypting module can be exploited to figure out the key parameters, so called side channel attack. Since side channel attacks are based on statistical methods, making side channel signal weak or complex is the proper solution to prevent the attack. Among many countermeasures, shielding the electromagnetic signal and adding noise to the EM signal were examined by applying different thicknesses of thin films of ferroelectric (BTO) and conductors (copper and gold). As a test vehicle, chip antenna was utilized to see the change in radiation characteristics: return loss and gain. As a result, the ferroelectric BTO showed no recognizable effect on both shielding and adding noise. Cu thin film showed increasing shielding effect with thickness. Nanometer Au exhibited possibility in adding noise by widening of bandwidth and red shifting of resonating frequencies.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.818-822
• /
• 1987

Gate capacitances have been measured directly on small-geometry MOSFET's with the drain voltage as a parameter for various channel lengths and for p and n channel types and the characteristics have been compared with each other. The influence of 'hot carrier effect' of short channel devices on capaciatance has been compared with long channel devices. The results show that gate capacitance characteristics of short channel device deviate from those of long channel device. The accuracy of the measurement system is less than a few femto Farad, and the minimum geometry (W/L) of device for which reliable measurement can be obtained is 6/3.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.1
• /
• pp.108-122
• /
• 2014

Massive antenna array is an attractive candidate technique for future broadband wireless communications to acquire high spectrum and energy efficiency. However, such benefits can be realized only when proper channel information is available at the transmitter. Since the amount of the channel information required by the transmitter is large for massive antennas, the feedback is burdensome in practice, especially for frequency division duplex (FDD) systems, and needs normally to be reduced. In this paper a novel channel feedback reduction scheme based on the theory of distributed compressive sensing (DCS) is proposed to apply to massive antenna arrays with spatial correlation, which brings substantially reduced feedback load. Simulation results prove that the novel scheme is better than the channel feedback technique based on traditional compressive sensing (CS) in the aspects of mean square error (MSE), cumulative distributed function (CDF) performance and feedback resources saving.

• Structural Engineering and Mechanics
• /
• v.77 no.4
• /
• pp.523-533
• /
• 2021

The present study investigates the lateral torsional buckling behaviour of pultruded glass fiber reinforced polymer (GFRP) simply supported channel beams subjected to uniform bending about their major axis. A parametric study by varying the sectional geometry and span of channel beams is carried out by using ABAQUS software. The accuracy of the FE models was ensured by verifying them against the available results provided in the literature. The effect of geometric nonlinearity, geometric imperfections, and the dependency of finite element mesh on the lateral torsional buckling were carefully considered in the FE model. Lateral torsional buckling (LTB) strengths obtained from the numerical study were compared with the theoretical LTB strengths obtained based on the Eurocode 3 approach for steel sections. The comparison between the numerical strengths and the design procedure proposed in the literature based on Eurocode 3 approach revealed disagreements. Therefore, a simplified improved design procedure is proposed for the safe design strength prediction of pultruded GFRP channel beams. The proposed equation has been provided that might aid the structural engineers in economically designing the pultruded GFRP channel beams in the future.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.778-798
• /
• 2014

This paper proposes a novel exposed-terminal-eliminated medium access control (ETE-MAC) protocol by combining channel reservation, collision avoidance and concurrent transmissions to improve multi-access performance of the multihop wireless networks. Based on the proposed slot scheduling scheme, each node senses the control channel (CCH) or the data channel (DCH) to accurately determine whether it can send or receive the corresponding packets without collisions. Slot reservation on the CCH can be simultaneously executed with data packet transmissions on the DCH. Therefore, it resolves the hidden-terminal type and the exposed-terminal type problems efficiently, and obtains more spatial reuse of channel resources. Concurrent packet transmissions without extra network overheads are maximized. An analytical model combining Markov model and M/G/1 queuing theory is proposed to analyze its performance. The performance comparison between analysis and simulation shows that the analytical model is highly accurate. Finally, simulation results show that, the proposed protocol obviously outperforms the link-directionality-based dual-channel MAC protocol (DCP) and WiFlex in terms of the network throughput and the average packet delay.