• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.2
• /
• pp.311-320
• /
• 2001

Since 1998 for protection of marine pollution, all ships must have oil filtering equipment and 15ppm bilge alarms which satisfy Requirements of MARPOL 73/78. Oily-water separator used in machinery area of ships usually consists of two parts; one is filtering equipment and the other is oil content meter(OCM). This study presents optical characteristics of bilge were acquired form oil content sensing module. The oil content sensing module consists of IR-LED light source, photo-diode light receivers, and a glass tube for bilge water sample. The experiment with the bilge water demonstrates various valuable optical properties. These optical properties suggest notes and guides to make the low-cost, easy operation and good performance commercial type OCM that satisfy the requirements of MARPOL 73/78.

• Environmental Analysis Health and Toxicology
• /
• v.6 no.1_2
• /
• pp.59-70
• /
• 1991

This study was performed to investigate the effect of olive oil diet on the immune response in ICR male mice. Experimental diets of 4 groups were fed ad libitum to the ICR male mice for 27 days. The results of this study were summarized as followings: 1. 10% Olive oil diet group as compared with the control diet group significantly decreased liver weight rate but significantly increased hemagglutination titer (HA), Arthus reaction, delayed type reaction (DTH), rosette forming cell (RFC), and phagocyte activity. 2. 20% Olive oil hypersensitivity diet group as compared with the control diet group significantly increased body weight gain, liver weight rate, and HA but significantly decreased Arthus reaction, DTH, RFC, phagocyte activity, and peripheral circulating white blood cell (WBC). 3. 30% Olive oil diet group as compared with the control diet group significantly increased liver weight rate but significantly decreased body weight gain, Arthus reaction, plaque forming cell (PFC), DTH, RFC, phagocyte activity, and WBC. The results showed that the increase of olive oil doses significantly decreased humoral and cellular immune responses, phagocyte activity, and WBC.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.6
• /
• pp.568-576
• /
• 1990

Recently, streaming electrification in forced oil cooled power transformer has been taken up as a serious problem. In this paper, the charging tendency of various insulation oils, such as mineral oil, polybutene and silicone oil has been measured by means of an injection type charging tendency measuring apparatus under various condition. The experimental data of the dependence of the leakage current on flow velocity and temperature of oil can be explained by considering the flow state such as laminar and turbulent flow. The effect of additives on the charging tendency of mineral oil has been investigated. BTA is regarded as the most effective retardant to electrification of oil among the additives chose for this investigation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.7
• /
• pp.885-893
• /
• 2012

DME (Dimethyl ether) is regarded as one of the candidates of alternative fuels for diesel engine, because of its higher cetane number suitable for a compression ignition engine. Also, DME is a simple chemical structure, colorless gas that is easily liquefied and transported. On the other hand, Bunker oil (JIS C heavy oil) has long been used as a basic fuel in marine diesel engines and is the lowest grade fuel oil. In this study, the combustion and emission characteristics were measured experimentally in the direct injection type diesel engine operated with DME and Bunker oil mixed fuel. From our experimental results, it is induced that DME and Bunker oil blended fuel would be an effective fuel which can reduces the concentration of harmful matter in exhaust gases.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.147-148
• /
• 2016

Generally, the vegetable oil contains glycerin esther and free fatty acid. When the vegetable oil reacts with concrete, the glycerin esther from oil induces saponification by reacting with and hydrolyzing calcium hydroxide from cement hydration. As a result of this saponification, it has been reported the expansion of concrete. although the free fatty acid from vegetable oil, as an acid, can decompose the concrete by producing soluble salt from calcium hydroxide or CSH, the hydration products of cement, there was no report on the harmful oil type for concrete. therefore, in this research, the property change of cement mortar incorporating fly ash was analyzed experimentally by immerging various types of vegetable oils.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.605-608
• /
• 2001

With the intention of investigating the breakdown properties of oil-immersed transformer oils in temperature range of 20∼100[$^{\circ}C$], we are made researches AC breakdown in the gap of 500∼2,500[$\mu\textrm{m}$]. The classification for the physical properties of oil for oil-immersed transformer by FTH and $^1$H-NMR experiments was confirmed to type of mineral oils. As the dependance of breakdown properties due to electrode gap length variation, breakdown voltage was found increasing according to the increase of gap, while dielectric strength was decreasing. As a result the characteristics for AC breakdown, It goes to prove that the breakdown voltage was increased to 90[$^{\circ}C$] but decreased over 90[$^{\circ}C$] in the temperature range. Also, breakdown voltage was found increasing in the increase of gap and the rising of temperature according to Weibull distribution.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.3
• /
• pp.396-401
• /
• 2010

The purpose of this study was the development of adsorbents for the refining of edible oil using agricultural byproducts such as rice hull, barley hull, and soybean hull as well as evaluation of their adsorptive effects against free fatty acids and lutein, the major impurities of soybean oil. Ash-type and carbon-type adsorbents were produced from the hulls. Ash-type adsorbents such as rice hull ash (RHA), barley hull ash (BHA) and soybean hull ash (SHA) were effective for the removal of free fatty acids; the acid value of degummed soybean oil was decreased by 86% upon treatment with 5% SHA. However, carbon-type adsorbents such as rice hull carbon (RHC), barley hull carbon (BHC), and soybean hull carbon (SHC) were effective for removing lutein, resulting in a 52% decrease in the lutein content of degummed soybean oil upon treatment with 5% SHC. Whereas ash-type adsorbents were composed of mesopores or macropores with small surface areas and total pore volume, carbon-type adsorbents were mainly composed of micropores with large surface areas and total pore volume.

• Korean Journal of Food Science and Technology
• /
• v.2 no.1
• /
• pp.88-92
• /
• 1970

1. Aflatoxin free and highly active new type kokja was made with strong two strains of yeast (Y-16, Y-21) and two strains of highly saccharifying active Aspergillus (A-32, A-11). And they were isolated from many kinds of kokja (over hundred) collected from all over Korea. 2. Activities of new type kokja was compared with old type kokja, and results were as following. (i) Saccharifying activity; New type kokja B, C and D were excellent (over 8. 0%), and home made old type kokja were poor quality. (ii) Alcohol fermentation; New type kokja C and D were over 12% and the old type K-12 and K-161 were low activity (less than 10%). (iii) Acid fermentation; Old type kokja K-2o and K-156 (industrial use) were better than the new type C and D. (iv) Fusel oil fermentation; Old type kokja K-23, K-26 (industrial use) and K-12 (home made) fermented high fusel oil (0.07%) and new type kokja C, D and B were the lowest (0.04%). 3. Adding food preservatives (AF-2, D.E.P.C.) and heat sterilizing of wheat bran for kokja had little concerning with the activity of new type kokja. 4. In brewing test, takju made from kokja C and D were more excellent in alcohol and fusel oil concentration than those from old type kokja K-1 and K-23. Taste and odour of takju from new type kokja was good enough to drink.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.3
• /
• pp.113-116
• /
• 2014

Power transformer insulation oil is critical to the useful life of the transformer. Although mineral base insulation oil is the most common type of transformer insulation oil in use, environmental and safety concerns has encouraged the development of biodegradable alternatives. Today, $Envirotemp^{(R)}\;FR3^{TM}$ is in commercial use and this study is aimed at ascertaining the possibility of applying the oil in Malaysia power transformers. A sample of $Envirotemp^{(R)}\;FR3^{TM}$ was tested to measure and compare the technical (including electrical, chemical and physical) properties of the oil according to Malaysian standards. The study found that the oil sample had better qualities, such as higher dielectric strength, lower dissipation factor, higher flash and fire points, higher moisture absorption capability, and less dissolved gases composition amongst others. However, it was also ascertained that further development in this area could be hindered due to Malaysia's lack of standards for biodegradable oil.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1251-1256
• /
• 2014

The use of lubrication oil is of many purposes and one among them is to drive the engine mounted on a ship. Hence the supply of clean lubrication oil is important. And an oil purifier is one of key components in marine diesel engines. At present, the element type full-flow oil filter has been widely used for cleaning the engine oil. The self-driven centrifugal oil purifier is a device which is used to remove the impurities in lubrication oil using a jet flow. The flow characteristics and the physical behaviors of particles in this self-driven oil purifier were investigated numerically and the filtration efficiencies were evaluated. For calculations, a Computational Fluid Dynamics method is used and the Shear Stress Transport turbulence model has been adopted. The Multi Frames of Reference method is used to consider the rotating effect of the flows. The influence of centrifugal forcehas been numerically investigatedto improve filtration efficiency of tiny particles. As a result of this research, it was found that the particle filtration efficiency using the only center axis rotating and outer wall rotating system are higher than that of the fully rotating system in the self-driven oil purifier.