• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.6
• /
• pp.631-642
• /
• 1998

Fall-out particles were collected by the modified British deposit gauges at 35 sampling sites in Suwon area from January to November, 1996. Twenty chemical species (Al. Ba, Cd, Cr, K, Pb, Sb, Zn, Cu, Fe, Ni, V, F-, Cl-, NO3-, 5042-, Na+, NH4+, Mg2+, and Ca2+) were analyzed by AAS and If. The purposes of this study were to estimate qualitatively various emission sources of the fell-out particle by applying multivariate statistical techniques such as factor analysis, multiple regression analysis, and discriminant analysis. During the study, outlier sites were determined by a z-score method. Cl-, Na+, Mg2+, and SO42- were highly correlated due to their common marine related source. Wind speed was the most influential factor for the deposition fluxes of the particle itself and all the chemical species as well. When applying the factor analysis, 8 source patterns were qualitatively obtained, such as marine source, soil source, oil burning source, Cr related source, tire source, Cd related source, agriculture source, and F- related source. As a result of the multiple regression analysis, we could suggest that some chemical compounds may possibly exist in the form of CaSO4, NaN03, NaCl, MgC12, (NH4)2SO4, NaF, and CaCl2 in the fall-out particles. Finally, spatial and seasonal classification study performed by a discriminant analysis showed th.at SO42-, Ca2+, Cl-, and Fe were dominant in the group of spatial pattern; however, SO42-, Cl-, Al, and V were in the group of seasonal pattern.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.457-476
• /
• 2016

This was investigated on the major issues and research trends regarding the heat-treatment of woods through literature reviews. The principal heat-treatment technologies utilized for industrial purposes include the Plato-process (Netherlands), the Retification process (France), the OHT-process (Germany), and the Thermowood Process (Finland). Factors that mainly influence the heat-treatment process are the wood species, process temperature, processing time, and the heating medium (air, steam, vacuum, N2, oil, etc.). Researches on investigating the optimal conditions with these process conditions being the variables stand as the mainstream. Heat-treated woods present dimensional stability improvement, but mass loss and strength reduction, a wide variations for decaying inhibition, and insufficient resistance against mold, wood borer, and termites. For further improvement in respects of durability or resistance to biological degradation, necessity to search for more suitable heat treatment process and processing conditions fit for each wood species has been suggested. Exploiting new ways to utilize heat-treated wood and extending its range of use have been considered to be important matters that need more effort put into for the sustainable and sound environment as well as saving the wood resources.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.24-24
• /
• 2018

Degraded plantation forests are increasing because of unfavorable forestry conditions prevailing in Japan, including falling timber prices, increasing operational costs, and aging and declining forestry workforce. To remedy this situation, appropriate management strategy is required. This study introduces the challenges of Odai Town, Mie Prefecture that employed a new management strategy by evaluating site suitability for conifer forests and that proposes a new forest management regime of planting deciduous trees in unsuitable sites. The site suitability for conifer forests was evaluated from two aspects: the natural site conditions and the relationship among site conditions, growth, and damage by Anaglyptus subfasciatus Pic. in Cryptomeria japonica D. Don and Chamaecyparis obtusa Sieb. Et Zucc. forests. By analyzing the relationship among site conditions, growth, and insect damage based on field data obtained in plantation forests, growth evaluation and insect damage evaluation maps were developed. Based on the natural forest investigation, natural site condition maps for C. japonica and C. obtusa were established. Furthermore, by integrating these evaluation maps with the forest road maps showing the accessibility to the forest, the forest management regime for the whole plantation area of Odai Town was established. The forest management regime map indicates the sites suitable for forestry: suitable for long-rotation, short-rotation, and potential sites for short-rotation. The sites unsuitable for forestry were considered to be more suitable for broadleaved forests. Clear-cutting was conducted in a small area and different seral stage saplings (approximately 20 deciduous tree species) suitable to the site conditions were planted in an area of $80-120m^2$ protected by deer-fences. This might establish a forest composed of many species with a multilayer vertical forest structure in a short period. The planted saplings were distributed neither randomly nor uniformly to reflect the natural distribution of trees in the forest. A challenge to develop new products using the deciduous trees has started, such as wood chips for preparing smoked food, essential oil, and deodorizer. As these challenges have just begun, their effects on enhancing sustainable resource management are still being monitored. Even with the challenges, this regime can be of high value as a management strategy to remedy the situation of expansion of degraded forests in Japan.

• Ocean and Polar Research
• /
• v.41 no.4
• /
• pp.289-309
• /
• 2019

Marine microalgae have long been used as food additives and feeds for juvenile fish and invertebrates as their nutritional content is beneficial for humans and marine aquaculture species. Recently, they have also been recognized as a promising source for cosmeceutical, nutraceutical, and pharmaceutical products as well as biofuels. Marine microalgae of various species are rich in multiple anti-oxidant phytochemicals and their bioactive components have been employed in cosmetics and dietary supplements. Oil contents in certain groups of marine microalgae are extraordinarily rich and abundant and therefore have been commercialized as omega-3 and omega-6 fatty acid supplements and mass production of microalgae-based biodiesels has been demonstrated by diverse research groups. Numerous natural products from marine microalgae with significant biological activities are reported yearly and this is attributed to their unique adaptive abilities to the great diversity of marine habitats and harsh conditions of marine environments. Previously unknown toxin compounds from red tide-forming dinoflagellates have also been identified which opens up potential applications in the blue biotechnology sector. This review paper provides a brief overview of the biotechnological potentials of Korean marine microalgae. We hope that this review will provide guidance for future marine biotechnology R&D strategies and the various marine microalgae-based industries in Korea.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.121-130
• /
• 1986

Using the sbsorption coefficients and the weighting factors of the gray gas, the total emissivities of C $O_{2}$- $H_{2}$O and C $O_{2}$- $H_{2}$O- transient species-soot gas mixtures can be expressed by the following equation, [a numerical formula] Where, $a_{i}$ and $K_{i}$ represent the weighting factor and the absorption coeffient of i-gray gas respectively; L is the pathlength of the gas. This equation is widely used for the analyses of the radiation heat transfer in the combustors of internal combustion engines and in the furnace of external combustion engines. In this work, a simple calculation model of the weighting factor and the absorption coeffient of the above equation was developed. The weighting factors and the absorption coefficients of combustion products were calculated by applying the model to various kinds of fossil fuels such as coal and heavy oil. Then, the computed total emissivities for each fuel and pathlength were compared with measured and calculated values which have been already published in the literatures. The followings were the results obtained through the comparisons between the calculated emissivites and the published values; the developed model for the calculations of the weighting factor and the absorption coefficient of C $O_{2}$- $H_{2}$O and C $O_{2}$- $H_{2}$O- transient species-soot gas mixtures could be applied over the wide ranges of the temperature and the pathlength; the errors between the total emissivities calculted and the values published were maximum 10%, and average 1%, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.3
• /
• pp.317-330
• /
• 2004

The Purpose of this study was to develop the P $M_{2.5}$ source Profiles, which are mass abundances (fraction of total mass) of a chemical species in P $M_{2.5}$ source emissions. The source categories studied were soil, road dust, gasoline and diesel vehicles, industrial source, municipal incinerator, coal-fired power plant, biomass burning, and marine. The chemicals analyzed were ions. elements. and carbons. From this study, soil source had the crustal components such as Si, hi, and Fe. In the case of road dust. Si, OC, Ca, Fe had large abundances. The abundant species were S $O_4$$^{2-}$, C $l^{[-10]}$ , N $H_4$$^{+}$, and EC in the gasoline vehicle and EC, OC, C $l^{[-10]}$ , and S $O_4$$^{2-}$ in the diesel vehicle. The main components were S $O_4$$^{2-}$, S N $H_4$$^{+}$, and EC in the industrial source using bunker C oil as fuel, C $l^{[-10]}$ , N $H_4$$^{+}$, Fe, and OC in the municipal incinerator source, and Si, Al, S $O_4$$^{2-}$, and OC in the coal -fired power plant source. In the case of biomass burning, OC, EC, and C $l^{[-10]}$ were mainly emitted. The main components in marine were C $l^{[-10]}$ , N $a^{+}$, and S $O_4$$^{2-}$.EX> 2-/.

• Research in Plant Disease
• /
• v.22 no.3
• /
• pp.184-189
• /
• 2016

To select resistant oil seed crops against two species of root-knot nematodes, Meloidogyne incognita and M. arenaria, 10 cultivars of sesame (Sesamum indicum L.) and 10 cultivars of perilla (Perilla frutescens var. japonica) were screened in greenhouse pot test. All sesame cultivars tested were resistant to M. incognita but susceptible to M. arenaria. While, perilla was resistant to both Meloidogyne species. Therefore, perilla cultivars could be used as rotation crop in greenhouse infested with both M. incognita and M. arenaria. But, sesame cultivars only can be used as a rotation crop in greenhouse infested with M. incognita but not for M. arenaria.

• Preventive Nutrition and Food Science
• /
• v.10 no.4
• /
• pp.316-325
• /
• 2005

The antioxidant potential of a $75\%$ methanolic extract of highbush blueberry (Vaccinium corymbosum L.) and its different fractions was investigated using different reactive oxygen species (ROS), nitric oxide (NO.), metal chelating and lipid peroxidation assays. Methylene chloride and $75\%$ methanol fractions showed equally high activities $(IC_{50} 0.010 mg/mL)$ for hydroxyl radical (HO) scavenging. Higher hydrogen peroxide $(H_2O_2)$ scavenging values were reported for the ethyl acetate and methylene chloride fractions and their $IC_{50}$ values were 0.20 and 0.15 mg/mL, respectively. Nitric oxide (NO.) and 1,1-diphenyl-2-picrylhydrazyl radical (DPPH) scavenging activities were higher in ethyl acetate and methylene chloride fractions. Chloroform and water fractions showed higher activities in superoxide $(O_2.)$ scavenging. All fractions showed strong metal chelating capacities compared with the commercial antioxidants tested. The $0.1\%$ ethyl acetate fraction showed notable capacity to suppress lipid peroxidation in both fish oil and linoleic acid. Phenolic content was measured in all the fractions and methanolic extract. Among the fractions, ethyl acetate fraction showed the highest phenolic content.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.11
• /
• pp.1789-1800
• /
• 2019

Objective: Although alveolar macrophages play a key role in the respiratory immunity of livestock, studies on the mechanism of differentiation and survival of alveolar macrophages are lacking. Therefore, we undertook to investigate changes in the lipid metabolism and survival rate, using 3D4/31 macrophages and Dudleya brittonii which has been used as a traditional asthma treatment. Methods: 3D4/31 macrophages were used as the in vitro porcine alveolar macrophages model. The cells were activated by exposure to phorbol 12-myristate 13-acetate (PMA). Dudleya brittonii extraction was performed with distilled water. For evaluating the cell survival rate, we performed the water-soluble tetrazolium salt cell viability assay and growth curve analysis. To confirm cell death, cell cycle and intracellular reactive oxygen species (ROS) levels were measured using flow cytometric analysis by applying fluorescence dye dichlorofluorescein diacetate and propidium iodide. Furthermore, we also evaluated cellular lipid accumulation with oil red O staining, and fatty acid synthesis related genes expression levels using quantitative polymerase chain reaction (qPCR) with SYBR green dye. Glycolysis, fatty acid oxidation, and tricarboxylic acid (TCA) cycle related gene expression levels were measured using qPCR after exposure to Dudleya brittonii extract (DB) for 12 h. Results: The ROS production and cell death were induced by PMA treatment, and exposure to DB reduced the PMA induced downregulation of cell survival. The PMA and DB treatments upregulated the lipid accumulation, with corresponding increase in the acetyl-CoA carboxylase alpha, fatty acid synthase mRNA expressions. DB-PMA co-treatment reduced the glycolysis genes expression, but increased the expressions of fatty acid oxidation and TCA cycle genes. Conclusion: This study provides new insights and directions for further research relating to the immunity of porcine respiratory system, by employing a model based on alveolar macrophages and natural materials.

• Journal of Food Hygiene and Safety
• /
• v.22 no.3
• /
• pp.145-150
• /
• 2007

Conjugated linoleic acid (CLA) reduces fat deposition in several mammalian species. The proposed mechanisms for this effect are reduced preadipocyte proliferation and differentiation. The objective of this study was to investigate the inhibitory effects of diglyceride (DG), CLA, DG-CLA of proliferation and differentiation of 3T3-L1 preadipocytes. Cell viability was determined using WST-8 analysis and cell differentiation was determined by glycerol-3-phosphate dehydrogenase (GPDH) activity. Lipid accumulation in differentiating 3T3-L1 cells was measured by Oil red O staining. The proliferation of preconfluent 3T3-L1 cells by treatments of DG, CLA, and DG-CLA was reduced in a dose-dependent manner. CLA among them was the most effective in reduction of viable cells with increasing concentrations. Treatments of the DG, CLA, and DG-CLA at the concentration of $100{\cdot}\ddot{I}g/ml$ for 48h significantly inhibited differentiation of 3T3-L1 cells (p<0.05). In addition. cytoplasmic lipid accumulation during differentiation of the 3T3-L1 preadipocytes was also inhibited by treatments of the test solutions. DG-CLA was the most effective in the inhibition of differentiation and lipid accumulation in 3T3-L1 cells. These results indicate that the DG including CLA as fatty acids is more effective for anti-obesity than DG or CLA alone and that consumption of DG-CLA as a dietary oil may give a benefit for controlling overweight in humans.