• 기술사
• /
• 제34권3호
• /
• pp.16-21
• /
• 2001

Biominerals are mean of biochemical mineralization and forming for ore depesits of limestone, iron, phosphate and energy minerals, etc . Our Country need in large quantity of biominerals, for example, about a hundred million ton of limestones, fifty million tons of iron ores, three million tons of phosphates, seven hundred million brrels of crude oil, eleven million ton of LNG and sixty million ton of coals per year.

• 한국산학기술학회논문지
• /
• 제15권1호
• /
• pp.249-255
• /
• 2014

본 논문은 농업부문 에너지 기본정책으로 시행되고 있는 정부의 면세유 공급정책의 경제적 파급효과를 측정한 내용을 담고 있다. 1986년부터 농가의 영농활동 지원을 위해 시행되어온 면세유 공급정책은 최근 국제유가가 급등함에 따라 확대 공급에 대한 농가의 요구가 높아지고 있는 상황이다. 그러나 면세유의 공급량이 최근 지속해서 감소하고 있고, 더욱이 산업통상자원부는 면세유 일몰정책의 추진을 지속해서 요구하고 있는 실정이다. 이와 같이, 정부의 농업부문 면세유 공급정책에 대한 확대 및 축소의 상반된 요구가 고조되고 있는 상황에서, 면세유 공급의 경제적 효과를 파악하여, 농업용 면세유의 경제적 기여도와 역할을 규명할 필요가 있다. 이 연구는 계량경제학적 방법을 이용하여 면세유 공급의 경제적 효과를 계측한 과정과 결과를 소개하고 있다. 분석결과, 농업용 면세유가 5년에 걸쳐 단계적으로 철폐되는 경우, 5년차 되는 해에 농업부문 GDP는 3조 1,950억원 감소하고, 농산물 가격은 26.6 포인트 상승하는 것으로 나타났다.

• 동력기계공학회지
• /
• 제22권1호
• /
• pp.48-55
• /
• 2018

It has recently been reported that methanol fuel has been used in the product carrier with established duel fuel engine, which has been greatly reducing emissions of $CO_2$, NOx and SOx from the engine. However, to use methanol alone as fuel oil in a general diesel engine, design modification of cylinder head is needed because the ignition aid device or the duel fuel injection system is needed. On the other hand, only if the mixer is installed on the fuel oil supply line, diesel oil - methanol blending oil can be used as fuel oil for the diesel engine, but there is a problem of the phase separation when two fuels are mixed. In this study, diesel oil and methanol were blended compulsorily in preventing the phase separation with installing agitators and a fuel oil boost pump on fuel line of a test engine. Also, cylinder pressure and fuel consumption quantity were measured according to engine load and methanol blending ratio, and indicated mean effective pressure, heat release rate and combustion temperature obtained from the single zone combustion model were analyzed to investigate the effects of latent heat of vaporization of methanol on combustion stability and characteristics. As a result, the combustion stability and characteristics of 10% methanol blending oil are closest to the those of diesel oil, and it could be used as fuel oil in existing diesel engines without deterioration of engine performance and combustion characteristics.

• Preventive Nutrition and Food Science
• /
• 제5권1호
• /
• pp.10-14
• /
• 2000

A simple and rapid method was developed to prepare a large quantity of highly pure conjugated linoleic acid (CLA) chemically-synthesized from safflower seed oil (SSO). CLA-SSO(74.9% in purity) was synthesized from fresh SSO(79.9% of linoleic acid) by alkaline isomerization at 18$0^{\circ}C$. Urea(50g) and CLA-SSO (25g) were completely dissolved in ethanol (750ml) using a water bath(5$0^{\circ}C$) and followed by refluxing for 60 min. The resultant was cooled to room temperature and stored in a cold room (4$^{\circ}C$) for 24hrs. After removing the urea adduct by filtration, the filtrate was rotoevaporated under 4$0^{\circ}C$ and the residue was dissolved in hexane (200ml). The hexane extract was washed with distilled water (100ml$\times$3) and dried over sodium sulfate anhydrous. This urea treatment procedure was repeated three times. The purity of CLA recovered from the hexane extract was 95.0%. This method can be applied to prepare a large quantity of highly pure chemically-synthesized CLA (>0.5kg/a batch) from any plant oils containing high percentages (>70%) of linoleic acid.

• 해양환경안전학회지
• /
• 제5권2호
• /
• pp.1-14
• /
• 1999

To find characteristics and areas of greater risk of oil spill at the coastal waters in Korea, some of risk factors were analyzed with historical data of oil spill and marine traffic. As a result, it is characterized that frequency of oil spill is increasing year by year and greatest percentage of spill source is fishing boat. It is proposed that the ports of Ulsan, Yeosu, Incheon and Pusan will be designated as primary area of risk as they have a higher risk of oil spills and its response authority is required to maintain appropriate regional response capability for prompt and effective response to a future spill incident. In addition, the regional response equipments at Ulsan are examined under a assumption of a medium size spill and it is found that the use of chemical dispersant can be an alternative when mechanical containment and recovery is not feasible in this area, and the existing response equipments may be appropriate to address that size of spill. However, the response authority is required to maintain more numbers of stronger boom for unsheltered waters and more quantity of concentrate dispersant to disperse all spilled oils on the water, furthermore the response authority should be prepared for a possible future catastrophic spill with sufficient equipments.

• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.77-82
• /
• 2016

When drilling through Inconel 601 nickel-chromium-based alloys, a large amount of cutting oil is required to prevent tools from wear and fracturing due to heat buildup resulting from the high temperature resistance and toughness of this alloy. However, cutting oil supply has become a factor compromising the machining environment, and this has caused attention to shift to a more environmentally friendly cutting fluid supply system called minimum quantity lubrication (MQL). Our aim in this study was to find a more efficient drill processing method using MQL, and to verify its performance. To that end, we proposed a sealed cover, a step feed, and POSS-type cutting oil as measures to increase the effectiveness of MQL in view of the cutting force and tool wear, and established an improvement in efficiency using the proposed measures.

• 터널과지하공간
• /
• 제3권1호
• /
• pp.24-32
• /
• 1993

Groundwater movement is one of the most important elements in the construction and management of underground oil storage cavern. To control the groundwater flow, grouting is run in parallel with water curtains. But as traditional grouting is conducted within cavern before and after excavation, the effect of grouting is delayed and the injection sphere is limited in the rock mass. Therefore, it is desirable to introduce a more extensive and effective grouting. This article is to present the caly grouting, which was the first to be carried out in the construction of underground caverns for oil storage in Japan. After conducting the clay grouting, the effect was confirmed by ground water level and infiltration quantity to the caverns.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.101-105
• /
• 2009

The purpose of this study is to reduce autogenous shrinkage of high-strength concrete. Previous studies were investigated to measure the effects of reductions to autogenous shrinkage when applying bean oil to concrete. The results of the study showed that as the mixture rate of BO increased, fluidity decreased and air quantity decreased slightly. In early age, compressed strength increased compared to Plain while decreased in long-term age. As an autogenous shrinkage characteristic, reduction effect increased according to increase in mixture rate. When mixture rate is 1%, approximately 30% decreased compared to Plain in BO. At 2%, BO decreased by about 32%. In addition, in the case of BO, autogenous shrinkage was shown to decrease compared to expansive additive and shrinkage-reducing agent.

• Journal of Advanced Marine Engineering and Technology
• /
• 제12권1호
• /
• pp.28-36
• /
• 1988

Since the oil shocks of 1970s, the quality of the fuel oil for marine diesel engines has become more degarded than ever. When the poorer quality fuel is burned, carbon residues of the fuel oil cause blockage of the fuel injection valve nozzle and troubles of fuel injection system. The mis-firing of engine occurs due to the decrease of fuel quantity injected, the decrease of compression pressure in the slow speed range, the increase of fuel leaked and the high ignition temperature of degraded fuel etc. This paper is to investigate theoretically the effects of mis-firing on the crankshaft axial vibration of diesel engine. The cylinder pressure in operation is calculated by the computer aided simulation of closed cycle for a large two-stroke diesel engine and also the exciting force of axial vibration and the resonance amplitudes are calculated. And then, the condition of normal state, misfiring and one-cylinder cut-off operation are analyzed. The results of calculations show good agreements with those of the actual measurements.

• 생명과학회지
• /
• 제18권12호
• /
• pp.1665-1670
• /
• 2008

콩의 oil은 식량유지 자원으로서 매우 중요한 부분을 차지하고 있으며, 전세계 식용유의 22%를 콩 oil이 차지하고 있으며 식품에서 매우 중요한 영양학적인 요소이다. 이중 불포화지방산은 지방산 중에서 종자 구성물질들은 polygenetic 형질들로 되어있다. 본 시험은 큰올콩과${\times}$신팔달콩의 RIL 계통과 SSR marker를 이용하여 유전자지도를 작성하고, 이를 바탕으로 불포화지방산의 함량과 관련된 양적형질 유전자좌(QTLs)를 탐색하였다. Oleic acid 함량과 관련된 QTLs는 7개의 연관군에서 8개의 마커가 확인되었으며, linoleic acid는 5개의 연관군에서 7개의 마커가 확인되었다. 그리고 linolenic acid는 5개의 연관군에서 각각 하나씩의 마커가 확인되었다. 본 시험의 결과 불포화지방산에 공통적으로 나타난 QTL은 연관군 C1과 L이었다.