• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.497-500
• /
• 2001

Shunt reactors are used to compensate for capacitive VARs generated by lightly loaded transmission lines or underground cables. They are normally connected to the transformer tertiary winding. Dry-type shunt reactors have the advantage compared with oil-immersed shunt reactor as followings. Lower investment and maintenance cost, No fire hazard and no environmental concerns, Simple insulation to ground, Response to transient overvoltage less severe, Linearity of inductance versus load current, Lower-acoustic noise, Easier transport and handling due to lower weight, No oil-collecting system must be provided since there is no oil that can leak into the ground.

• 한국해양바이오학회지
• /
• 제6권2호
• /
• pp.123-130
• /
• 2014

Three types of artificial microparticle diets were developed for rotifer (Brachionus plicatilis) enrichment. The efficacies of enrichment with the artificial diets were evaluated and compared to those with commercial enrichment diets on the growth and survival of flounder larvae. Total lipid content was highest in the rotifer enriched with oil capsule (40.5% in dry weight). The n-3 highly unsaturated fatty acid (n-3 HUFA) content was also highest in the rotifer fed with oil capsule (7.08% in dry weight). The flounder larvae fed on the rotifer enriched with oil capsule showed the highest growth compared to those fed on any other enriched rotifer (P<0.05). The survival ratio of flounder larvae fed on the rotifers enriched with oil capsule and emulsion oil were higher than those fed on any other enriched rotifer (P<0.05). From the feeding study, the growth and survival of flounder larvae were enhanced by feeding rotifer enriched with oil capsule compared to rotifer enriched with any other diets. The rotifer fed on oil capsule containing high contents of n-3 HUFA. Therefore, a significant relationship between the growth and survival of flounder larvae and the n-3 HUFA content of rotifer could be obtained.

• 한국축산식품학회지
• /
• 제35권2호
• /
• pp.240-247
• /
• 2015

Sucuk is the most popular dry-fermented meat product. Sucuk has a relatively high fat. Poppy seed oil as animal fat replacer was used in Turkish sucuk and effects of its use on sucuk quality were investigated. There was a significant (p<0.5) treatment × ripening time interaction for moisture, pH (p<0.05) and 2-thiobarbituric acid reactive substances (TBARS) values (p<0.01). Increasing poppy seed oil level decreased (p<0.05) TBARS values. Addition of poppy seed oil to the sucuks had a significant effect (p<0.01) on hardness, cohesiveness, gumminess, chewiness and springiness values. Cholesterol content of sucuks decreased (p<0.05) with poppy seed oil addition. Using pre-emulsified poppy seed oil as partial fat replacer in Turkish sucuk decreased cholesterol and saturated fatty acid content, but increased polyunsaturated fatty acids. Poppy seed oil as partial animal fat replacer in Turkish sucuk may have significant health benefits.

• 보존과학회지
• /
• 제28권3호
• /
• pp.217-228
• /
• 2012

문화재의 훼손은 다양한 형태로 발생된다. 특히 옥외에 노출되어 있는 금속문화재의 표면 손상은 인위적인 훼손인 페인트나 유성물질 성분의 낙서 등과 같은 행위로 유물의 역사적, 미술사적 가치를 저하시킨다. 그러므로 본 연구에서는 친환경적이고 인체에 무해한 dry-ice pellet cleaning을 페인트 및 유성물질을 제거하는데 적용하였으며 결과를 습포법과 비교하였다. 실험 결과 습포법으로 제거할 경우 유성페인트는 제거는 되었으나 금속 표면에 얼룩이 남아 있었으며 락카 스프레이는 제거가 잘 이루어지지 않고 수지가 들떠 있는 현상이 나타났다. Dry-ice pellet cleaning으로 유성페인트를 제거한 경우 표면관찰, 색도계, FT-IR, SEM 분석을 통해 유물 표면에 손상 없이 깨끗하게 제거되었으며 락카 스프레이로 제거한 경우 육안 관찰로는 깨끗하였으나 SEM 관찰 결과 미세 입자가 표면에 남아있는 것이 관찰되었다. 그러므로 본 연구를 통해 dry-ice pellet cleaning의 대체 가능성과 한계성을 함께 확인할 수 있었다.

• 한국작물학회지
• /
• 제39권4호
• /
• pp.382-388
• /
• 1994

저장기간과 용도에 따른 대두종실의 건물 및 화학성분의 변화를 비교하기 위하여 장려 3품종에 대하여 2년의 저장기간 차이를 두었으며 용도에 따라서는 장려 5품종과 재래 2품종을 공시재료로 하여 종실을 종피와 자엽(유근포함)으로 분리하여 건물중, 발아율, 단백질, 지방, 전분, 당 및 oligo당을 분석하였다. 1. 3년 저장된 종자에서 건물중의 감소가 나타났으며, 발아율도 급격히 저하되었다. 2. 저장기간동안 자엽의 무게가 현저히 감소하였고, 종피의 구성비율은 증가하였다. 3. 3년 저장된 종자의 종피에서는 단백질, 지방, 탄수화물이 모두 감소하였고, 자엽에서는 단백질의 함량이 41.65%로 현저하게 감소하였다. 4. 종피의 구성비율은 대립종보다 소립종에서 높았다. 5. 밥밑콩에서 자엽의 단백질과 지방함량은 평균 43.59%와 18.25%로 장려품종에 비해 낮았고, 전분과 당의 함량은 평균 5.70%와 11.58%로 현저하게 높았다. 6. Sucrose, raffinose 및 stachyose의 함량은 밥밑콩에서 높았다.

• 한국항만경제학회지
• /
• 제27권2호
• /
• pp.217-240
• /
• 2011

이 연구는 VAR 모형을 이용하여 국제유가가 BDI, 선형에 따라 BCI, BPI 등 3개의 운임 지수에 각각 어떠한 영향을 미치는지와 VECM모형을 이용하여 케이프사이즈와 파나막스 시장 간의 파급효과를 분석하였다. 첫째, VAR모형을 이용하여 국제유가의 변화가 BCI에 미치는 효과는 시차 1기의 경우 통계적으로 정(+)의 유의적인 효과를 갖고, BPI의 경우에는 시차 3기의 경우에만 음(-)의 유의적인 효과를 갖고, BDI 운임지수에 미치는 효과는 시차 1기의 경우 통계적으로 정(+)의 유의적인 효과를 갖는 것으로 나타났다. 충격반응함수 분석의 결과는 국제유가의 충격으로부터 BDI의 반응은 약 3개월 정도 지속적으로 상승하다가 이후로는 감소하는 것으로 나타났다. 둘째, VECM모형을 이용하여 케이프사이즈와 파나막스 시장 간의 파급효과를 분석한 결과는 BCI와 BPI 운임지수 간에 장기적인 균형관계로부터의 이탈이 발생하는 경우 BPI 운임지수가 감소하는 방향으로 조정되었다. 또한 동태적인 상관관계의 경우 시차 1기의 케이프사이즈 시장에서의 운임이 상승하면 금기의 파나막스 시장에서의 운임이 상승하는 것으로 나타났다. BCI와 BPI 운임지수간의 동학적인 충격반응함수의 분석으로부터 BCI 운임지수의 충격으로부터 BPI 운임지수의 반응은 약 3개월 정도 가파르게 상승하다가 5개월 이후로는 변화가 없는 것으로 나타났고, BPI 운임지수의 충격에 대한 BCI 운임지수의 충격반응의 정도는 매우 작게 나타났으며, 약 3개월 정도 완만하게 상승하다가 이후로 거의 변화가 없는 것으로 나타났다.

• Tribology and Lubricants
• /
• 제12권3호
• /
• pp.107-114
• /
• 1996

MoS$_{2}$ bonded film was applied to reduction gears, and its lubricating properties were experimentally evaluated in terms of the power transmission efficiency and the frictional noise with a dynamo-typed gear test rig. Tests were performed in both oil lubrication and dry condition where the rotating velocity and loading torque were varied. In dry condition, MoS$_{2}$ bonded films effected the power transmission efficiency to increase about 5%, and the frictional noise level to decrease about 6 dB under the test operating conditions. It well proved that MoS$_{2}$ bonded films were a very effective solid lubricant for reduction gears. In oil lubricating conditions, the frictional properties of the coated gears were mainly governed by the lubricating oil, and lubricating effects of MoS2 bonded films were not evident. The result suggested that lubricating effect of MoS$_{2}$ bonded films would be limited to prevent a damage of reduction gears in the initial run when they were used in oil lubrication conditions.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.59-63
• /
• 2012

The use of dry chemical powder has been increased as it can be stored for a long period and sustain in stable condition compared to gas or liquid phase extinguishing agents. A new type of dry chemical powder using Zeolite was produced in the research. Chemical powder was adsorbed into Zeolite 13X, a porous material appearing negative catalytic effect, to create extinguishing powder obtaining core shell structure and measured physical properties and run a small scale fire extinguishment. SEM, XRD, TA analysis was also executed, and extinguishing characteristics were measured by fire extinguishing experiment on oil pool fire. The experiment showed that the average particle size of Zeolite 13X was equivalent, indicating about $3{\pm}1{\mu}m$ and thermal analysis result illustrated that Zeolite 13X showed exothermic reaction peaks at $900^{\circ}C$ due to solid-state transformation. Extinguishing characteristics on oil fire of $NaHCO_3$/Zeolite 13X and $NH_4H_2PO_4$/Zeolite were improved, influenced by adsorbed extinguishing powders on Zeolite 13X and Zeolite 13X that contains high phase transition temperature.

• Journal of Microbiology and Biotechnology
• /
• 제20권9호
• /
• pp.1348-1350
• /
• 2010

Conidia of Beauveria bassiana ARSEF-7060, produced in millet amended with plant oils such as sunflower, corn, or cotton seed oil, were exposed to $45^{\circ}C$ of wet heat for 90 min. Conidia from millet+corn oil medium had the highest thermotolerance [$LT_{50}$ (median survival time): 45.7 min]. The mycotized millet grains were coated with each of the same plant oils as a granular formulation and subjected to $50^{\circ}C$ of dry heat for 8 h. Corn oil coating ($LT_{50}$: 8.68 h) was superior to sunflower and cotton seed oil coatings, suggesting the feasibility of using corn oil to increase conidial thermotolerance.

• 한국의학물리학회지:의학물리
• /
• 제30권4호
• /
• pp.89-93
• /
• 2019

Purpose: This study aims to develop new markers based on silicone rubber and urethane rubber to enhance visibility in low magnetic field magnetic resonance (MR) imaging. Methods: Four types of markers were fabricated using two different base materials. Two of the markers were composed of two different types of silicone rubber: DragonSkin™ 10 MEDIUM and BodyDouble™ SILK. The other two markers were composed of types of urethane rubber: PMC™ 780 DRY and VytaFlex™ 20. Silicone oil (KF-96 1000cs) was added to the fabricated markers. The allocated amount of oil was 20% of the weight (wt%) of each respective marker. The MR images of the markers, with and without the silicone oil, were acquired using MRIdian with a low magnetic field of 0.35 T. The signal intensities of each MR image for the markers were analyzed using ImageJ software and the visibility for each was compared. Results: The highest signal intensity was observed in VytaFlex™ 20 (279.67±3.57). Large differences in the signal intensities (e.g., 627% in relative difference between BodyDouble™ SILK and VytaFlex™ 20) among the markers were observed. However, the maximum difference between the signal intensities of the markers with the silicone oil showed only a 62% relative difference between PMC™ 780 DRY and DragonSkin™ 10 MEDIUM. An increase in the signal intensity of the markers with the silicone oil was observed in all markers. Conclusions: New markers were successfully fabricated. Among the markers, DragonSkin™ 10 MEDIUM with silicone oil showed the highest MR signal intensity.