• The Korean Society of Law and Medicine
• /
• v.16 no.2
• /
• pp.87-130
• /
• 2015

In a case in which National Health Insurance Corporation (NHIC) pays medical care expenses to a victim of a traffic accident resulting in injury or death and asks the assailant for compensation of its share in the medical care expenses, as the precedent treats the subrogation of a claim set by National Health Insurance Act the same as that set by Industrial Accident Compensation Insurance Act, it draws the range of its compensation from the range of deduction, according to the principle of deduction after offsetting and acknowledges the compensation of all medical care expenses borne by the NHIC, within the amount of compensation claimed by the victim. However, both the National Health Insurance Act and the Industrial Accident Compensation Insurance Act are laws that regulate social insurance, but medical care expenses in the National Health Insurance Act have a character of 'an underinsurance that fixes the ratio of indemnification,' while insurance benefit on the Industrial Accident Compensation Insurance Act has a character of full insurance, or focuses on helping the insured that suffered an industrial accident lead a life, approximate to that in the past, regardless of the amount of damages according to its character of social insurance. Therefore, there is no reason to treat the subrogation of a claim on the National Health Insurance Act the same as that on the Industrial Accident Compensation Insurance Act. Since the insured loses the right of claim acquired by the insurer by subrogation in return for receiving a receipt, there is no benefit from receiving insurance in the range. Thus, in a suit in which the insured seeks compensation for damages from the assailant, there is no room for the application of the legal principle of offset of profits and losses, and the range of subrogation of a claim or the amount of deduction from compensation should be decided by the contract between the persons directly involved or a related law. Therefore, it is not reasonable that the precedent draws the range of the NHIC's compensation from the principle of deduction after offsetting. To interpret Clause 1, Article 58 of the National Health Insurance Act that sets the range of the NHIC's compensation uniformly and systematically in combination with Clause 2 of the same article that sets the range of exemption, if the compensation is made first, it is reasonable to fix the range of the NHIC's compensation by multiplying the medical care expenses paid by the ratio of the assailant's liability. This is contrasted with the range of the Korea Labor Welfare Corporation's compensation which covers the total amount of the claim of the insured within the insurance benefit paid in the interpretation of Clauses 1 and 2, Article 87 of the Industrial Accident Compensation Insurance Act. In the meantime, there are doubts about why the profit should be deducted from the amount of compensation claimed, though it is enough for the principle of deduction after offsetting that the precedent took as the premise in judging the range of the NHIC's compensation to deduct the profit made by the victim from the amount of damages, so as to achieve the goal of not attributing profit more than the amount of damage to a victim; whether it is reasonable to attribute all the profit made by the victim to the assailant, while the damages suffered by the victim are distributed fairly; and whether there is concrete validity in actual cases. Therefore, the legal principle of the precedent concerning the range of the NHIC's compensation and the legal principle of the precedent following the principle of deduction after offsetting should be reconsidered.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.1
• /
• pp.1-8
• /
• 2011

The accuracy of MR sensor-based electronic compass is influenced by the temperature drift and DC offset of the MR sensor and the OP-amp, the magnetic distortion of nearby magnetic materials, and the compass tilt We design the 3-axis MR sensor and accelerometers-based electronic compass which is compensated by the set/reset pulse switching method on the temperature drift and DC offset, by the execution of hard-iron calibration routine on the magnetic distortion, and by the execution of the Euler rotational equation on the compass tilt. We qualitatively analyze the measured azimuth error on the execution of sensitivity calibration routine which is the normalization process on the different sensitivity of each MR sensor and the different gain of each op-amps. This compensation and analytic result make us design the one degree accuracy electronic compass.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.229-236
• /
• 2009

UWB signal with high resolution capability can be used to estimate ranging and positioning in wireless personal area networks. The clock frequency differences of nodes have serious affects on asynchronous ranging methods to estimate locations of mobile nodes. The specification of high rate UWB describes successive TWR method with the estimation of a relative clock frequency offset. In this paper, we complete the ranging equations using relative frequency offset and time information, and propose a method to estimate the exact frequency offsets. We evaluate the ranging algorithms with simulation. The results show that the performances of the algorithms using frequency offsets are very close without noise. But, at noise environment, the method of exact frequency offsets shows better performance than that of relative frequency offsets.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1152-1160
• /
• 2004

OFDM technique was adopted as the standard of IEEE 802.1 la and it has been widely used for wireless LAN, European DVB/DAB system, Korean DMB system. In the standard of IEEE 802.11a the data packet is composed of two parts, preamble and data. Preamble is composed of short pilots and long pilots, which are used for synchronization and estimation of frequency offset and channel. We can also compensate phase noise effect in the transceiver by using above pilots. The phase noise is more complicate than frequency offset and seriously affects system performance. In this paper, we newly propose CPE and ICI simultaneous compensation method to compensate phase noise generated by transceiver oscillator and compare with previous studies. As results, phase noise effect can be significantly compensated by CPE cancellation method, PNS algorithm and our proposed CPE and ICI compensation method. Especially, the proposed CPE and ICI compensation method can achieve the best BER performance compared with original OFDM, CPE cancellation method and PNS algorithm.

• Journal of the Korea Convergence Society
• /
• v.7 no.3
• /
• pp.77-85
• /
• 2016

We propose a digital signal processing technic that can compensate the non-linearity inherent in audio amplifiers, and present the result of the simulation. The inherent non-linearity of the audio power amplifier arising from analog devices is compensated via a digital signal processing technic consisting of indirect learning architecture and an adaptive filter. The simulation results show that the compensator can be realized using a third-order polynomial and compensates odd-order non-linearity efficiently. The even-oder non-linearity is mainly due to the dc offset at the output, which is difficult to eliminate with the proposed method. Care must be taken in designing the bias circuit to avoid the DC offset at the output. The proposed technic has significance in that digital signal processing technic can compensate for the impairment that is an inherent characteristic of an analog system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7C
• /
• pp.735-742
• /
• 2006

In this paper, we explain the operation scheme and fixed-point design method of DFE (Digital Front End), which performs DC offset compensation, automatic frequency control, and automatic gain control over the input signal to the UE (User Equipment) receiver of IEEE 802.16e OFDMA-TDD system. Then, we analyze the performance of DFE under ITU-R M. 1225 Veh-A 60km/h channel environment. To optimize the fixed-point design of DFE, we reduce the number of bit resulted from calculation without performance degradation, leading to the decreased complexity of the operation in H/W, and design the Loop filter with considering trade-off between the Acquisition time and the Stability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4C
• /
• pp.241-253
• /
• 2011

In this paper, a CFNC (Complex Field Network Coding) scheme is presented, which focuses on improving transmission efficiency by reducing time slots that are needed to exchange data frames. Conventional CFNC scheme has the advantage of minimizing the number of time slots required for information exchanges. However, there exists serious performance deterioration because the transmit signals are interfered with each other. Moreover, when CFNC scheme is applied, the estimation and compensation performance of fine frequency offset severely deteriorates due to the multiple frequency offsets in received signal of relay node. In order to overcome these critical problems, we propose an improved CFNC scheme with modified maximum likelihood decision method which uses uplink transmit diversity. Also, we propose an enhanced fine frequency offset estimation method and a corresponding compensation method to deal with the multiple frequency offsets. Corresponding simulation results verify that the proposed methods are able to effectively solve the problems of CFNC scheme.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.4
• /
• pp.542-551
• /
• 1998

In this study, a method of error compensation for channel gain imbalance, phase imbalance and local oscillator leakage in the modulator of frequency direct conversion is suggested. The compensation of channel imbalance can be carried out by using the received power after transmitting test signal. By applying this method, the phase imbalance conversion with frequency can be easily compensated since this method is rarely affected by the transmission channel. It is confirmed that the algorithm proposed in this study(iteration coefficient=11) converges faster than conventional algorithm(iteration coefficient=43). From the numerical results, the DC-offset, channel gain, phase imbalance compensation coefficient and iteration number converges into($f_1$=0.0199999, $f_2$=-0.050001, $C_{22}$=0.9133, $C_{12}$=-0.0524, N=13) when the local oscillator leakage is not considered. However, it converges into($f_1$=-0.02, $f_2$=-2.2476, $C_{22}$=0.9133, $C_{12}$=-0.0524, N=16) when the local oscillator leakage is considered.

• Journal of information and communication convergence engineering
• /
• v.5 no.2
• /
• pp.164-170
• /
• 2007

In this paper, the new method alternating with the method for forming the symmetrical distribution of power and local dispersion in high bit-rate WDM system with optical phase conjugator (OPC) is proposed. The proposed method is carried by finding out the optimal values of OPC position offset and fiber dispersion offset. It is assumed to be that NRZ-formatted 24-channels of 40 Gbps are simultaneously propagated in WDM system with non zero - dispersion shifted fiber (NZ-DSF) of 1,000 km. It is confirmed that the compensation extents of overall WDM channels are more improved by applying the induced optimal values into WDM system than those in WDM system with the conventional mid-span spectral inversion (MSSI) technique, and the searching procedure of the optimal values makes little difference of performance if the optimal value of one parameter related with another parameter. And, it is confirmed that the flexible design of WDM system with OPC is possible by effectiviely using by these optimal values. Thus, it is expected that the proposed method alternate with the forming method of the symmetrical distributions of power and local dispersion.

• Journal of Power Electronics
• /
• v.10 no.3
• /
• pp.313-319
• /
• 2010

This paper proposes a new compensation algorithm for the current measurement errors in a DFIG (Doubly Fed Induction Generator). Generally, current measurement path with current sensors and analog devices has non-ideal factors like offset and scaling errors. As a result, the dq-axis currents of the synchronous reference frame have one and two times ripple components of the slip frequency. In this paper, the main concept of the proposed algorithm is implemented by integrating the 3-phase rotor currents into the stationary reference frame to compensate for the measured current ripples in a DFIG. The proposed algorithm has several beneficial features: easy implementation, less computation time, and robustness with regard to variations in the electrical parameters. The effectiveness of the proposed algorithm is verified by several experiments.