• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1896-1898
• /
• 2001

An offset problem caused by the static parasitic capacitors is analyzed and then some techniques to reduce their effect on the capacitive position sensor are presented. Also new offset compensation technique is proposed that by adjusting the magnitudes of the modulating signals independently, the charge imbalance between electrodes caused by the parasitic capacitors is eliminated without sensor gain variation. Simulation results are given to validate the proposed compensation technique.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1707-1713
• /
• 2016

This paper proposes a dc error compensation algorithm using dq-synchronous coordinate transform digital phase-locked-loop in single-phase grid-connected converters. The dc errors are caused by analog to digital conversion and grid voltage during measurement. If the dc offset error is included in the phase-locked-loop system, it can cause distortion in the grid angle estimation with phase-locked-loop. Accordingly, recent study has dealt with the integral technique using the synchronous reference frame phase-locked-loop method. However, dynamic response is slow because it requires to monitor one period of grid voltage. In this paper, the dc offset error compensation algorithm of the improved response characteristic is proposed by using the synchronous reference frame phase-locked-loop. The simulation and the experimental results are presented to demonstrate the effectiveness of the proposed dc offset error compensation algorithm.

• ETRI Journal
• /
• 제29권1호
• /
• pp.45-49
• /
• 2007

The poly-Si thin film transistor (TFT) shows large variations in its characteristics due to the grain boundary of poly-crystalline silicon. This results in unacceptably large input offset of low-voltage differential signaling (LVDS) receivers. To cancel the large input offset of poly-Si TFT LVDS receivers, a full-digital offset compensation scheme has been developed and verified to be able to keep the input offset under 15 mV which is sufficiently small for LVDS signal receiving.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1593-1600
• /
• 2015

This paper proposes a novel compensation algorithm of current offset error for single-phase linear compressor in home appliances. In a half-bridge inverter, current offset error may cause unbalanced DC-link voltage when the DC-link is comprised of two serially connected capacitors. To compensate the current measurement error, the synchronous reference frame transformation is used for detecting the measurement error. When an offset error occurs in the output current of the half-bridge inverter, the d-axis current has a ripple with frequency equal to the fundamental frequency. With the use of a proportional-resonant controller, the ripple component can be removed, and offset error can be compensated. The proposed compensation method can easily be implemented without much computation and additional hardware circuit. The validity of the proposed algorithm is verified through experimental results.

• 전력전자학회논문지
• /
• 제27권5호
• /
• pp.402-409
• /
• 2022

In vector-controlled drive systems, the current measurement offset error causes unwanted torque ripple, resulting in speed and torque control performance degradation. The current measurement offset error is caused by various factors, including thermal drift. This study proposes a simple DC offset error compensation method for a surface permanent magnet motor based on a disturbance observer. The disturbance observer is designed in the stationary reference frame. The proposed method uses only the measured current and machine parameters without additional hardware. The effect of parameter variations is analyzed, and the performance of the current measurement offset error compensation method is validated using simulation and experimental results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.201-202
• /
• 2008

In this paper, an efficient frequency offset compensation design for OFDM(Orthogonal Frequency Division Multiplexing) is proposed. The conventional CORDIC(COordinate Rotation Digital Computer) algorithm for frequency offset compensation utilizes CORDIC hardware and complex multiplier. But, proposed structure utilizes only one CORDIC hardware.

• 한국항행학회논문지
• /
• 제9권2호
• /
• pp.140-146
• /
• 2005

본 논문에서는 HDR-WPAN 시스템에 적합한 주파수 옵셋 보상과 누적 위상오차를 개선할 수 있는 트래킹 알고리즘을 제안하고 이에 대해 분석하였다. 주파수 옵셋 보상 알고리즘은 CAZAC sequence의 자기상관 특성을 이용하여 각 심벌 내 샘플 간 위상오차를 통해 coarse 주파수 옵셋과 fine 주파수 옵셋을 추정하게 된다. 그러나 HDR-WPAN 시스템은 payload에 pilot 심벌이 없기 때문에 payload 길이가 길어질수록 샘플 간 미소 위상오차가 누적되어 수신단의 성상도가 회전하게 된다. 따라서 트래킹 알고리즘을 통해 틀어진 누적 위상오차를 보상해야 한다. 트래킹은 성상도내 들어온 신호가 일정 영역을 벗어나게 되면, 벗어난 만큼의 크기 ${\theta}$을 곱해 누적된 미소 위상오차를 보상하게 된다.

• 전기학회논문지
• /
• 제64권7호
• /
• pp.1005-1011
• /
• 2015

This paper proposes the DC offset compensation algorithm with fast response to the sensed grid voltage in the single-phase grid connected inverter. If the sensor of the grid voltage has problems, the DC offset of the grid voltage can be generated. This error must be resolved because the DC offset can generate the estimated grid frequency error of the phase-locked loop (PLL). In conventional algorithm to compensate the DC offset, the DC offset is estimated by integrating the synchronous reference frame d-axis voltage during one period of the grid voltage. The conventional algorithm has a drawback that is a slow dynamic response because monitoring the one period of the grid voltage is required. the proposed algorithm has fast dynamic response because the DC offset is consecutively estimated by transforming the d-axis voltage to synchronous reference frame without monitoring one cycle time of the grid voltage. The proposed algorithm is verified from PSIM simulation and the experiment.

• 한국정보통신학회논문지
• /
• 제24권1호
• /
• pp.15-21
• /
• 2020

본 논문에서는 미확인 우주물체를 감시하기 위해, 전자광학 관측 장비인 망원경 시스템의 관측 성능에 대한 M&S(Modeling & Simulation) 분석을 수행한다. 2개의 망원경 시스템을 활용한 미확인 우주물체 관측에 대한 운용개념을 고려하고, M&S 모델을 구성한다. 관측 운용개념을 바탕으로 초기궤도결정을 수행하여 추정궤도를 생성하고, 추정궤도에 대한 옵셋 보정을 수행하여 보정 주기에 따른 관측 성능을 분석한다. 본 논문의 M&S 분석 결과는 옵셋 보정 주기가 짧을수록 관측 성능이 높게 나타나며, 길어질수록 오차 보정 기회가 줄어들기 때문에 성능이 낮아짐을 보여준다. 그래서 미확인 우주물체 감시를 위한 망원경 시스템의 관측 성능을 높이기 위해서는 초기궤도 추정을 정밀화하거나 옵셋 보정을 지속적으로 수행할 수 있도록 하는 관측 시스템이 구성되어야 한다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.437-440
• /
• 2008

In this paper, we present and analyze a robust frequency offset estimation scheme for orthogonal frequency division multiplexing (OFDM) systems over radio communication channels. When there exists frequency offset, the loss of orthogonality occurs and the interference problem among several subcarriers in OFDM signals is introduced. The guard interval of OFDM signals is employed for estimating the frequency offset. Furthermore, in order to enhance the frequency offset estimation performance, a ternary sequence is utilized. A frequency offset is estimated based on the synchronized correlator output. The proposed frequency offset estimation scheme can be applied to track the carrier frequency offset of OFDM systems.