• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1896-1898
• /
• 2001

An offset problem caused by the static parasitic capacitors is analyzed and then some techniques to reduce their effect on the capacitive position sensor are presented. Also new offset compensation technique is proposed that by adjusting the magnitudes of the modulating signals independently, the charge imbalance between electrodes caused by the parasitic capacitors is eliminated without sensor gain variation. Simulation results are given to validate the proposed compensation technique.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1707-1713
• /
• 2016

This paper proposes a dc error compensation algorithm using dq-synchronous coordinate transform digital phase-locked-loop in single-phase grid-connected converters. The dc errors are caused by analog to digital conversion and grid voltage during measurement. If the dc offset error is included in the phase-locked-loop system, it can cause distortion in the grid angle estimation with phase-locked-loop. Accordingly, recent study has dealt with the integral technique using the synchronous reference frame phase-locked-loop method. However, dynamic response is slow because it requires to monitor one period of grid voltage. In this paper, the dc offset error compensation algorithm of the improved response characteristic is proposed by using the synchronous reference frame phase-locked-loop. The simulation and the experimental results are presented to demonstrate the effectiveness of the proposed dc offset error compensation algorithm.

• ETRI Journal
• /
• v.29 no.1
• /
• pp.45-49
• /
• 2007

The poly-Si thin film transistor (TFT) shows large variations in its characteristics due to the grain boundary of poly-crystalline silicon. This results in unacceptably large input offset of low-voltage differential signaling (LVDS) receivers. To cancel the large input offset of poly-Si TFT LVDS receivers, a full-digital offset compensation scheme has been developed and verified to be able to keep the input offset under 15 mV which is sufficiently small for LVDS signal receiving.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1593-1600
• /
• 2015

This paper proposes a novel compensation algorithm of current offset error for single-phase linear compressor in home appliances. In a half-bridge inverter, current offset error may cause unbalanced DC-link voltage when the DC-link is comprised of two serially connected capacitors. To compensate the current measurement error, the synchronous reference frame transformation is used for detecting the measurement error. When an offset error occurs in the output current of the half-bridge inverter, the d-axis current has a ripple with frequency equal to the fundamental frequency. With the use of a proportional-resonant controller, the ripple component can be removed, and offset error can be compensated. The proposed compensation method can easily be implemented without much computation and additional hardware circuit. The validity of the proposed algorithm is verified through experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.5
• /
• pp.402-409
• /
• 2022

In vector-controlled drive systems, the current measurement offset error causes unwanted torque ripple, resulting in speed and torque control performance degradation. The current measurement offset error is caused by various factors, including thermal drift. This study proposes a simple DC offset error compensation method for a surface permanent magnet motor based on a disturbance observer. The disturbance observer is designed in the stationary reference frame. The proposed method uses only the measured current and machine parameters without additional hardware. The effect of parameter variations is analyzed, and the performance of the current measurement offset error compensation method is validated using simulation and experimental results.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.201-202
• /
• 2008

In this paper, an efficient frequency offset compensation design for OFDM(Orthogonal Frequency Division Multiplexing) is proposed. The conventional CORDIC(COordinate Rotation Digital Computer) algorithm for frequency offset compensation utilizes CORDIC hardware and complex multiplier. But, proposed structure utilizes only one CORDIC hardware.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.140-146
• /
• 2005

In this paper, we proposed the frequency offset compensation algorithm and tracking algorithm which could improve the accumulated phase error for HDR-WPAN system. The proposed frequency offset compensation technique estimated each sample phase error by autocorrelation characteristics of CAZAC sequence, estimated phase error multiple each sample in a symbol, and finally compensated for the frequency offset. After frequency offset compensation using two steps, coarse and fine frequency offset, tracking algorithm have to use to compensate for the accumulated phase error. Because there is no pilot symbol in payload, more phase rotation occurred in received signal constellations due to the accumulated phase error as the payload length increase. Tracking algorithm compensates for a cumulative phase error ${\theta}$ between payload data.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.7
• /
• pp.1005-1011
• /
• 2015

This paper proposes the DC offset compensation algorithm with fast response to the sensed grid voltage in the single-phase grid connected inverter. If the sensor of the grid voltage has problems, the DC offset of the grid voltage can be generated. This error must be resolved because the DC offset can generate the estimated grid frequency error of the phase-locked loop (PLL). In conventional algorithm to compensate the DC offset, the DC offset is estimated by integrating the synchronous reference frame d-axis voltage during one period of the grid voltage. The conventional algorithm has a drawback that is a slow dynamic response because monitoring the one period of the grid voltage is required. the proposed algorithm has fast dynamic response because the DC offset is consecutively estimated by transforming the d-axis voltage to synchronous reference frame without monitoring one cycle time of the grid voltage. The proposed algorithm is verified from PSIM simulation and the experiment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.15-21
• /
• 2020

In this paper, the observation performance of the electro-optical telescope system which surveils the unknown space objects, is analyzed by the Modeling & Simulation(M&S). The operation concept for the observation of the unknown space objects using two telescope systems is considered and the M&S models are constructed. Based on the operation concept for observing the unknown space objects, the estimated orbit is generated by Initial Orbit Determination(IOD) and the observation performance is analyzed according to the offset compensation cycle for the estimated orbit. The result of the M&S based analysis in this paper shows that the observation performance increases with the shorter offset compensation cycle, and decreases with the longer offset compensation cycle. Therefore, to improve the performance of the telescope system which surveils the unknown space objects, the observation system with accurate initial orbit determination or shorter offset compensation cycle should be designed and constructed.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.437-440
• /
• 2008

In this paper, we present and analyze a robust frequency offset estimation scheme for orthogonal frequency division multiplexing (OFDM) systems over radio communication channels. When there exists frequency offset, the loss of orthogonality occurs and the interference problem among several subcarriers in OFDM signals is introduced. The guard interval of OFDM signals is employed for estimating the frequency offset. Furthermore, in order to enhance the frequency offset estimation performance, a ternary sequence is utilized. A frequency offset is estimated based on the synchronized correlator output. The proposed frequency offset estimation scheme can be applied to track the carrier frequency offset of OFDM systems.