• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.145-152
• /
• 2013

Objective: The aim of this study is to develop an ergonomic office chair that has an alarm function for the unbalanced sitting postures. Background: Contrary to expectation, it is reported that office workers sit on their chairs much more in unbalanced postures during daily work. Even though an office worker uses an ergonomically good-designed chair and begins their work in a good sitting posture, his/her posture is likely to shift to the unbalanced bad posture. Therefore, a posture alarm system would be very helpful in keeping office workers' good postures. Method: We developed a prototype chair with four load cells under a seat pan and one load cell beneath a backrest. Through some experiments, we set the criteria for unbalanced bad postures then implemented the criteria into the alarm system of the prototype chair. The chair called e-BASE chair could detect unbalance postures and show alarms for chair users. We also enhanced back support by developing a step-wised folding backrest. Results: The e-BASE chair showed better performance in interface pressure distributions and balanced posture ratio in VDT work. Conclusion: The ergonomic chair with posture alarm function(e-BASE chair) was developed. It showed better performance in seat pressure distribution and in keeping good posture during office work. Application: The posture alarm system and folding backrest can be applied to the new models of office chair.

• Journal of the Korea Furniture Society
• /
• v.15 no.1
• /
• pp.41-52
• /
• 2004

Most of us spend the greater part of our lives at the chair, but of all the man environments it is maybe the least well-explored share commitment to a cleaner and healthier environment. It has long been chairs belief that the environment is a precious gift. In case of mesh chair, because it depend upon the earth's resources to design and manufacture steel furniture products, human beings feel an abiding responsibility to act wisely in the environmental choices we make, large and small, every day. Ergonomically, it ought to do more than just sit there. It should actively intercede for the health of the person who sits in it longer than it should. Therefore, product design should be approachable to satisfaction of end-users in aspect of value engineering easy to move through analysis of cost reduction factors the purpose of this thesis is to study products for users based on office chair to development of design for office chair by analysis of manufacturing status and methods and problems in Korea through research on actual situation as well as changing process ergonomic study and design of office chair.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.376-380
• /
• 2000

All chairs are uncomfortable in the long run, but some chairs become uncomfortable more rapidly than others, and in any particular chair, some people will be more uncomfortable than others. Comfort will depend upon the interaction of chair characteristics, user characteristics, and task characteristics. In this study, we intend to design the comfortable office chair by investigating the anthropometric and biomechanical aspects for Korean. Therefore, we determine the design dimensions using the analysis of anthropometric data. With these dimensions, we design the chair mechanism of which backrest reclines with increasing chair pan declination. This mechanism allows the back to get adequate support at the correct level for any backrest declination. Also, the lumbar support in the backrest descends with increasing backrest reclining. By using this chair, a considerably better sitting posture can be obtained, and uncomfortable feeling and back pain may be prevented.

• Journal of the Korea Furniture Society
• /
• v.10 no.1
• /
• pp.13-21
• /
• 1999

All chairs are uncomfortable in the long run and some chairs become uncomfortable more rapidly than others. In a particular chair, some people feel more uncomfortable than others. Comfort will depend upon the interaction of chair, user, and task characteristics. In this study, we intended to design a comfortable office chair by investigating anthropometric and biomechanical aspects for Koreans. We determine the design dimensions by analysis the anthropometric data. With these body parameters, we determined the design dimensions such as seat height, seat depth, seat width, seat backrest width, etc. This research, hopefully contributes to the development of ergonomic chair and improvement of the chair design technologies.

• Journal of the Korea Furniture Society
• /
• v.10 no.2
• /
• pp.9-16
• /
• 1999

The goal of the present study is to develop the Human Interface Elements(HIE's) for evaluating the physical suitability of office chairs. HIE is generally defined as the physical characteristic of manufacturing goods, and it is closely related to the body dimension of a user and environment that it is used. In the present study the design elements of a chair were investigated, and from here, HIE's of office chair were developed based on relatedness of the design components, the physical characteristics of users, and characteristics of an environment that it used. As a result, components of a chair were classified as 6 major parts: Seat pan, back rest, arm rest, function control unit, seat supports and whole system. 43 HIE's were extracted from there 6 components. Also, the method for measuring HIE were developed.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.4
• /
• pp.267-279
• /
• 2014

Objective: The objective of this study was to define the Dynamic Sitting (DS) through trend analysis and research on the Dynamic Chair (DC) and applied technologies. Background: The effects of changing posture on the human body have been studied to find out healthy sitting postures. It is believed that changing posture is effective in reducing disc pressure on spinal cord and preventing back pain and musculoskeletal disease. But, the definition of DS and trends of DC have not been researched yet. Therefore, trend analysis of DC and its applied technologies are required to define dynamic sitting posture. Method: We researched the type of occupant postures from previous studies. And then, sitting behaviors were classified into three types; (1) sitting and standing, (2) working and studying, (3) taking a rest. Results: Variety shapes of DC and applied technologies were found out. From the result, the trend of DC and applied technology were summarized from three perspectives. ; (1) changing the chair functions according to user's intention, (2) conversion of dynamic chair technologies to office chair mechanism, (3) enables the user to change their sitting posture without operating control device. Conclusion: From this study, we defined dynamic sitting posture and analyzed the trend of DC and its applied technologies. This result might be used to develop an office chair for healthy sitting. But further investigation is required to figure out the technologies and functions for development of healthy chair. Application: The results of the publishing trend analysis might help to determine design concept of office chair.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.2
• /
• pp.155-165
• /
• 2014

Objective: The aim of this study is to develop an office chair enabling to keep working at reclined sitting posture. Background: Sedentary workers are supposed to change the posture frequently during long hours of sitting. A reclined sitting position has been recommended to reduce disc pressure. But slumped sitting posture caused by the buttock sliding forward without any adjustment of back reclining is commonly observed. The worker seems to have tendency to change the sitting posture maintaining working condition. We assumed the reason to be their hands movement away from the working space when tilting backward. Method: Slide mechanism allowing seat to move forward was designed to maintain the hand position in working space during reclining. A prototype was manufactured and tilting motion was analyzed using motion capture system. Four experiment chairs were tested including the manufactured prototype chair and three other commercial chairs. Results: A backward movements of the hand position were 13.0mm, 101.7mm, 156.1mm and 139.3mm at the prototype chair, compared to chair B, chair C and chair D, respectively. And the movement was remarkably small at the prototype chair. Conclusion: The developed seat sliding chair allows back tilting maintaining hand position at working space. We expect the user tilting back more often than normal tilting chair during seated work. But further investigation is required to figure out the effectiveness of the developed chair using prolonged working hours. Application: The developed office chair directly affects commercialization.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.2
• /
• pp.167-174
• /
• 2014

Objective: This research focuses on the working environment of office workers and aims to propose an ideal seating posture and chair design. Background: Generally, office workers having to seat in a fixed posture for long periods of time tend to suffer from an increased rate of musculoskeletal disorders. Method: The measurement and survey of 123 office workers on their working conditions and literature survey will lead to a suggestion of an ideal seating posture and workstation design theory. Results: Work environment satisfaction appeared low for chair and desks. Work-related pain over the last year was experienced among 47.2% of the respondents in shoulder (34.2%), neck (30.9%). Observation of working posture revealed that only 27.6% of workers utilize backrest during work. Conclusion: Office work embodies many situations where risks of musculoskeletal disorders may be high. Thus, the seated workplace must be set up to allow proper seating posture for workers. Application: The results of this study can be applied as baseline data for preventing musculoskeletal disorders of office workers.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.2
• /
• pp.97-108
• /
• 2014

Objective:The present study is intended to evaluate the usability of a console chair for a weapon locating radar by comparing with different kinds of chair design. Background: Console chairs need to be ergonomically designed to reduce physical workload of operators and improve mission capability; few studies have been reported which systematically evaluate usability of military console chairs. Method: Ergonomic design of a console chair, a bus seat, and an office chair was evaluated in terms of headrest, seatback, seatpan, armrest, and controller on a 7-point scale. Ten males in their 20s and 30s were recruited considering the demographic characteristics of console operators. Results: The satisfaction scores of the console chair for headrest, seatback, and seatpan were significantly higher than those of the bus seat (mean difference [MD] = 0.9) and office chair (MD = 1.3). Meanwhile, the satisfaction scores of the console chair for armrest and controller were significantly lower than those of the office chair (MD = -1.4) and bus seat (MD = -2.2). Conclusion: The armrest and controller of the console chair needs ergonomic improvements for better comfort. Application: The evaluation results of the console chair would be of use for ergonomic console chair design.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.2
• /
• pp.151-165
• /
• 2015

Objective: This study aims to develop and scientifically investigate the efficacy of the Spine S-curve Reactive Backrest that responds to the spine curvature of the user when seated, and maintains and enhances the natural S-curve of the lower back, thereby helping to relieve fatigue, correct posture and prevent spine deformities. Background: The focus of current development, design guidelines and/or standards for office chairs is mainly placed on the chair's dimensions, incline angle, adjusting features and lumbar support. Research and development was called for developing a chair backrest that maintains and improves the S-curve of the full spine. Method: The Spine S-curve Reactive Backrest was ergonomically designed to maintain correct posture and enhance user comfort. When leaned on, the backrest responds to the user's spine line and the whole lower back sits closely against the backrest, thereby aligning the user's lower back and backrest as one to maintain and improve the natural S-curve formation of the spine. In order to evaluate the efficacy of the newly designed chair (new design) and the comparison target (chair), five male college students of standard body type with normal spine curvature were selected as test subjects, and a motion analyzer and electromyography were utilized to measure S-curve and erector spinae muscle activity when seated. Results: The spine S-curve was better maintained and improved when sitting in the new design than in the comparison chair. Particularly notable was the greater displacement gap of the thoracic spine than the cervical spine, and also that of the lumbar more than the thoracic spine, with the increase of the backrest tilting angle. Furthermore, the electromyogram results showed the new design caused a lower fatigue level of the erector spinae muscles compared to the comparison chair, and also earned a higher preference in the subjective opinion results. Conclusion: The newly designed chair in this study responds to the user's spine curvature and maintains and enhances the lower back's natural S-curve, and thereby relieves fatigue, promotes better posture, and helps to prevent spine deformities better than existing office chairs. There is a need to widely introduce and supply this new design. Application: The new design is applicable to office and student chairs, and is expected to improve concentration and work efficiency.