• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.297-300
• /
• 2012

Since the adoption of GMDSS, the band 495-505 kHz has no longer been globally used for maritime calling and distress and the designation of this band for calling and distress was suppressed at WRC-07. In accordance with provision RR, maritime mobile operations are presently limited to radiotelegraphy. Accordingly, use of the band has diminished.This frequency band 415 kHz to 526.5 kHz and high frequencies is ideally suited to broadcast from shore to ship. The surface wave propagation of a coast station using this band can provide a coverage area from the coast to 400 nautical miles off shore.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7B
• /
• pp.1001-1008
• /
• 2010

In this paper, we propose the dynamic spectrum allocation (DSA) algorithm using spectrum sharing method considering the long-term priority between NOs and service classes for the maritime communication system environment where a ship locates at either near shore (or land) or off-shore. It was shown that the proposed algorithm using spectrum sharing with priorities could deliver better satisfaction ratio (SR) than the fixed allocation schemes, in the context of provision of required bandwidth (or spectrum) for each users. Therefore, we conclude that the proposed DSA with priorities could apply to the maritime communication environment and exploit the under-used (or unused, idle) spectrum of terrestrial communication networks.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.1
• /
• pp.34-39
• /
• 1994

The dilution and the shore attachment of buoyant effluent into a crossflow are investigated experimentally. The effluent is produced by discharging warm water through a side channel into an open channel crossflow with the same depth to the side channel flow. Buoyancy causes the effluent to lift off the bottom, spreads across the crossflow and stays as the surface layer. The geometry of the recirculating region and the dilution of the effluent depend mainly on the buoyancy. The condition of the shore attachment can be specified by the ratios of velocities and Froude numbers.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1166-1177
• /
• 2014

A new type of topology with medium-frequency-transformer (MFT) isolation for medium voltage wind power generation systems is proposed in this paper. This type of converter is a high density power conversion system, with high performance features suitable for next generation wind power systems in either on-shore or off-shore applications. The proposed topology employs single-phase cascaded multi-level AC-AC converters on the grid side and three phase matrix converters on the generator side, which are interfaced by medium frequency transformers. This avoids DC-Link electrolytic capacitors and/or resonant L-C components in the power flow path thereby improving the power density and system reliability. Several configurations are given to fit different applications. The modulation and control strategy has been detailed. As two important part of the whole system, a novel single phase AC-AC converter topology with its reliable six-step switching technique and a novel symmetrical 11-segment modulation strategy for two stage matrix converter (TSMC) is proposed at the special situation of medium frequency chopping. The validity of the proposed concept has been verified by simulation results and experiment waveforms from a scaled down laboratory prototype.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.6
• /
• pp.125-134
• /
• 2010

This study was performed to evaluate the workability, strengths and durability of polymer concrete using oyster shell that are reclaimed at public shore illegally or leaved on the surroundings of shore to prevent the environmental pollution. We investigated the effect of oyster shell powder (OSP) and $CaCO_3$. on the slump, compressive strength, flexural strength, acid sulfuric and freezing and thawing resistance as a filler of polymer concrete. Modified OSP obtained by crushing oyster shell (less than 0.15 mm size) consists of 60.47 wt% of $SiO_2$ and 39.5 wt% of $CaCO_3$. As a result of slump test by OSP and $CaCO_3$. contents, it is found that slump of specimen used OSP is lower than that used $CaCO_3$. and the more OSP contents are, its slump is increased. Compressive and flexural strength of polymer concrete using OSP are similar or slightly lower than that using $CaCO_3$. In acid sulfuric test for 5 % $H_2SO_4$ and freezing thawing test, regardless of kinds of fillers and contents are not found fatal defects in weight change, falling-off in surface and durability factor.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.1
• /
• pp.73-81
• /
• 2020

For the fault tree analysis (FTA) analysis of the packaged hydrogen filling station, the composition of the charging station was analyzed and the fault tree (FT) diagram was prepared. FT diagrams were created by dividing the causes of events into external factors and internal factors with the hydrogen event as the top event. The external factors include the effects of major disasters caused by natural disasters and external factors as OR gates. Internal factors are divided into tube tailer, compressor & storage tank, and dispenser, which are composed of mistakes in operation process and causes of accidents caused by parts leakage. In this study, the purpose was to improve the hydrogen station. The subjects of this study were domestic packaged hydrogen stations and FTA study was conducted based on the previous studies, failure mode & effect analysis (FMEA) and hazard & operability study (HAZOP). Top event as a hydrogen leaking event and constructed the flow of events based on the previous study. Refer to "Off shore and onshore reliability data 6th edition", "European Industry Reliability Data Bank", technique for human error rate prediction (THERP) for reliability data. We hope that this study will help to improve the safety and activation of the hydrogen station.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.5
• /
• pp.654-658
• /
• 2014

We report the first identification of a spawning ground of the blackfin flounder Glyptocephlaus stelleri near the Wangdol-cho sea mountains, located in the southern East Sea. Eggs and larval fish of G. stelleri were collected during April and June, 2014, when an abundance of eggs was found in the southern area of Wangdol-cho. Our findings suggest that G. stelleri prefers to spawn in the vicinity of the off-shore sea mountains, where the temperature is between 10 and $12^{\circ}C$ and the water depth is 100 m, rather than inshore.

• Journal of Ship and Ocean Technology
• /
• v.6 no.3
• /
• pp.13-25
• /
• 2002

In this paper, the motion responses with hydrodynamic interaction effect between two off-shore floating structures in various heading waves are studied by using a linearized three-dimensional potential theory. Numerical calculations using three-dimensional pulsating source distribution techniques have been carried out for twelve coupled linear motion responses and relative motions of the barge and the ship in oblique waves. The computational results give a good correlation with the experimental results and also with other numerical results. As a result, the present computational tool can be used effectively to predict the motion responses of multiple offshore floating structures in waves.

• International Journal of Concrete Structures and Materials
• /
• v.6 no.4
• /
• pp.251-256
• /
• 2012

This paper presents an experimental study on the pore and penetration of chloride in seashore concrete depending on types of curing forms. Three types of concretes (Plain concrete, MSF concrete and FA concrete) with four different form types (wood, coating wood, steel and polypropylene film) were examined. The test results show that the air volume in concrete was relatively higher with steel and polypropylene forms than others, and wood form shows the least air volume. The penetration of chloride depending on type of form is showed a wide variability, that is, the values on plain concrete, MSF concrete and FA concrete are 115.2, 125.5 and 121.6 %, respectively. Based on the present study, concrete should be considered the conditions of curing form-type for durable concrete.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.423-426
• /
• 2007

Pohang Wind Energy Research Center (PoWER-C) is developing a 3 MW Radial Flux Permanent Magnet (RFPM) Synchronous Generator for offshore Wind Energy Converter (WEC). The rotor rpm is 15.7 and the gear ratio is set to be 92.93. The nominal generator rpm at the rated load is about 1459. To reduce the switching loss in the power electronics, the maximum frequency is limited to 100 Hz. This requirement limits the number of pole to six or eight. Permanent magnet excitation is assumed for higher energy yield and higher efficiency. In this report, the requirements and the first efforts for the physics design are described.