• 한국환경과학회지
• /
• 제8권5호
• /
• pp.607-610
• /
• 1999

The odor removal of landfill site leachate was carried out using pyroligenous liquid. The constituent elements of pyroligenous liquid and leachate were also analysed, employing Atomic Absorption Spectroscopy(AAS). Before order removal, the heavy metal ions such as Pb, Zn, Cu, Mn, Fe and Ni, in pyroligenous liquid were detected with ultra trace level. However, in this liquid, other metal ions such as As, Hg and Cd were not observed. The optimum condition for removing odor fromthe leachate was observed in 15 times dilution of pyroligenous liquid. Also, the degree of outlet odor was 1. Furthermore, the concentration of odor constituent compounds, e.g. $H_2S, NH_3, NH_2$ and $CO_2$ in the leachate was remarkably reduced. Finally, water quality of the leachate was improved.

• 상하수도학회지
• /
• 제8권2호
• /
• pp.12-24
• /
• 1994

The occurrence of objectionable tastes and odors in drinking water is a common and widespread problem. The most troublesome odors are usually those described as muddy or earthy-musty. Two organic compounds which have been implicated as the cause of earthy-musty odor problems in water are geosmin and 2-Methylisoborneol. These earthy-musty organics have been shown to be metabolites of actinomycetes and blue green algae. The purpose of this paper is to describe adsorbability in removing these two oder causing compounds(geosmin and 2-MIB) upon various conditions like pH variation, adding humic acid and different activated carbon. The conclusion of this study are as followings. In batch test, carbon dosage is 10mg/100ml for geosmin and 15mg/100ml for 2-MIB. Both were in equilibrium state after 60 hours. In model simulation, F-P model described experiment data and modelling data appropriately in geosmin but F-S model not. In case of 2-MIB, models didn't describe relation between experiment and modelling data well. Two causative agents of earthy-musty odor compounds, geosmin and 2-MIB, are strongly adsorbed by activated carbon either coconut or brown. There appears to be no effect of pH (3,7,9) on adsorption of these two organics. Activated carbon proved to be more effective for removing geosmin than for removing 2-MIB. When activated carbon is. used in removing these two organics, the removal of these appeared to be adversely affected by back ground organic compounds, such as humic substances, due to competitive adsorption.

• 한국축산시설환경학회지
• /
• 제14권1호
• /
• pp.1-8
• /
• 2008

This study was conducted to solve the problem of public grievance owing to odor of a pig farm. Odor emissions from pig production systems mainly originate from liquid manure storage and solid manure fermentation. The low-cost odor abatement system (OAS) for application at liquid manure storage tank and solid manure fermentation facilities was developed in this study. The OAS adapted odor removing principles of a biofilter and biotrickling filter. The OAS is very simplified in structure. The appearance of the OAS had a form of cylindrical or cubical shape. The system performance was monitored for about one year after stabilization. A 7 seconds empty bed contact time for the OAS was adapted to achieve the odor reduction levels. The commercial type of OAS was constructed with media comprised of wood chips. Moisture content always remained above 50% wet basis. Average ammonia removal efficiency for the developed design was 89% at the liquid manure storage tank. Also, the removal efficiency at a solid manure fermentation facility was 86% on ammonia.

• 한국안전학회지
• /
• 제13권1호
• /
• pp.92-97
• /
• 1998

Malodorous gases give discomfort and harm to laborers and residential neighborhoods and therefore, the removing odor materials emitted from plants and industrial facilities is important subject. The main ingredients of alkali odor are $NH_3$ and $CE_3SH$. The adsorption characteristics of odors were studied using four different activated carbon fibers(ACF) and active carbon(AC). Alkali odor was removed by using ACF impregnated with $H_3PO_4$ and $H_2SO_4$ and treated with $HNO_3$ and NaOH. The experimental result showed that ACF has a higher removal efficiency than AC. The adsorption capacity was increased with the impregnation and surface treatment, and $H_2SO_4$ was the best impregnant for the removal of alkali odor.

• 공업화학
• /
• 제20권2호
• /
• pp.218-222
• /
• 2009

국 내외 관련기술현황에서 파악한 바와 같이, 종래의 악취 및 먼지제거 기술은 처리방법이나 경제성 면에 있어서 만족스럽지 못한 측면이 있고, 먼지와 악취가 동시에 발생하는 작업장의 경우 이 두 시설을 별도로 설치해야 하는 것이 큰 문제점이었다. 기존의 Bag Filter와 ACF (활성탄섬유)의 이중필터 형식인, ACF장착 Bag Filter를 적용하여 하나의 시설로 분진 및 악취 동시제거용 복합 Bag Filter 시스템을 개발을 위한 기초자료를 검토하였다.

• 산경연구논집
• /
• 제9권12호
• /
• pp.23-29
• /
• 2018

Purpose - The purpose of this study is to apply a cost effective ultrasonic odor reduction method that generated micro-bubbles using ejector to the Southeast Asian wastewater market. Research design, data, and methodology - A leather maker located in Ansan-city, Gyunggi-do, South Korea was sampled from the collection tank to select experimental materials. Experimental setup consisted of circulating water tank-air ejector-ultrasonic device, and circulating wastewater. Sample analysis was performed by CODcr, T-N, T-P, and turbidity by the National Environmental Science Institute. Results - Experimental results show that it is most effective in removing odors when the frequency range of ultrasonic wave is 60~80 Khz and the output is 200 W. It showed that the concentration of complex odor dropped from a maximum of 14,422 times to a minimum of 120 times. Also, analysis of ammonia and hydrogen sulfide in specific odor substances has shown that they were reduced from 1.5 ppm to 0.4 ppm and from 0.6 ppm to 0.1 ppm, respectively. Conclusions - It is possible to shorten more than 12 hours in the treatment of micro-organisms. It can be seen that the processing time of odor after ultrasonic treatment in the pre-treatment facility is reduced by 25% when compared to the resultant micro-organisms after the chemical treatment, that is, the time of the bio-treatment of micro-organisms. Based on the results, it was confirmed that the pre-treatment method using the ultrasonic and the air ejector device of the experiment shows the effect of reducing the water pollutants and odor more effectively in a relatively short time than the conventional advanced oxidation method.

• 한국수자원학회논문집
• /
• 제30권3호
• /
• pp.235-245
• /
• 1997

대청호 원수를 취수하여 정수하는 대청수도에서 이취미를 제거하고 THM(Trihalomethanes) 발생량을 줄이기 위하여 기존 표준정수공정에 오존과 활성탄여과공정을 추가한 pilot plant 실험을 수행하였다. pilot 실험결과 표준정수공정에서 DOC(dissolved organic carbon)는 약 25% 제거되었으나, 오존공정에서는 거의 제거되지 않았고, 30일이 지난 후 GAC(granular activated carbon)에서는 약 75%까지 제거되는 것으로 나타났다. 표준정수공정에서 이취미는 약 30%, 오존산화공정에서 약 60%정도 제거되었고, 활성탄여과에서 대부분 제거되었으나, Column 1과 2에서는 DOC와 같이 이취미물질도 파과(breakthrough) 되는 것으로 나타났다. 전염소처리 대신에 중1, 2염소처리를 도입할 경우 전염소처리와 비교하여 약 25%정도의 THM발생량이 감소하였으며, 후염소처리만할 경우 약 30%까지 감소하는 것으로 나타났다.

• 공업화학
• /
• 제20권5호
• /
• pp.547-552
• /
• 2009

본 연구에서는 fiber reinforced plastics (FRP) 제품 가공시 발생하는 분진 및 악취 물질로 인한 작업현장의 악조건을 개선하기 위하여 activated carbon fiber (ACF) 장착 하이브리드 백필터를 개발하였다. FRP 제조업체 2개사에 ACF 백필터를 설치함에 있어 천장, 벽하단 부분에 덕트를 설치함은 물론 이동식 집진 덕트를 설치함으로써 집진효율을 높였다. 펄스젯트식 탈진방식을 채택하여 효과적인 시스템 운영을 유도함으로써 작업환경을 개선하고자 하였다. 하이브리드 백필터 시스템 운용시 이에 따르는 분진과 악취에 대한 제거동향을 고찰하였다.

• 자원리싸이클링
• /
• 제12권1호
• /
• pp.48-54
• /
• 2003

연간 250,000 톤 정도 생산되는 패각을 이용하여 악취제거기능을 갖는 폴리에틸렌 필름을 제조하기 위해, 패각 표면의 탄산이온을 바탕으로 양이온 또는 양이온성 계면활성제의 이온교환에 의한 표면흡착 및 이에 따른 표면 극성 변화를 통해서 악취제거능을 부여하였다. 패각 표면의 개질은 앙이온성 계면활성제로서 DTAB(n-dodecyltrimethylammonium bromide), CTAB(n-cetyltrimethy-lammonium bromide), 그리고 DHAB(n-dihexadecyldimethylammonium bromide)를 사용하였다. 또한 앙이온의 금속으로는 $Ce^{3+}$ , $Mg^{2+}$ , $Al^{3+}$ 를 이용하여 계면활성제의 이온교환방법으로 표면을 개질하였다. 표면 개질된 패각 분말을 이용하여 LDPE라 패각 기준 20 wt% 마스터배치(masterbatch, MB)를 제조한 후 다시 LDPE와 섞어서 패각 기준 3, 5, 10 wt%의 폴리에틸렌필름을 제조하였다. 생산된 필름의 규격은 폭 40 cm, 두께 40 $mu extrm{m}$ 이었다. 제조된 패각 필름에 대한 기계적 물성 측정 결과 패각의 첨가로 인한 기계적 물성의 큰 저하는 관찰되지 않았으며, 순수 폴리에틸렌 필름 대비 80% 이상의 물성을 유지하였다. 악취제거능은 양이온성 계면활성제로 개질된 패각 필름이 시험된 모든 종류의 악취에 대하여 가장 우수한 악취 흡착 제거능을 보여주었으며, 개질되지 않은 패각 필름도 비교적 우수한 악취제거능을 보여주었다.

• 공업화학
• /
• 제32권5호
• /
• pp.497-503
• /
• 2021

본 연구에서는 악취가스 및 휘발성 유기 화합물을 산화 제거하기 위한 백금/티타니아를 허니컴 및 메탈폼 담체에 코팅하는 방법을 확인하였다. 다양한 방법 중 파우더 코팅과 나노 코팅에 대한 비교를 수행하였다. SEM/EDX (Scanning Electron Microscopy/Energy Dispersive X-ray spectroscopy) 분석은 허니컴 및 메탈폼의 표면 상태 및 노출된 백금 성분비를 조사하는데 사용되었다. 또한, 촉매 코팅 방법에 따른 톨루엔, 트리메틸아민, 아이소프로필 알코올의 제거 성능을 비교하였다.