• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.416-422
• /
• 2011

In this study, the effect of cosurfactant on the phase equilibrium and dynamic behavior was studied in systems containing NP7 nonionic surfactant solutions and nonpolar hydrocarbon oils. All cosurfactants used during this study such as n-pentanol, n-octanol and n-decanol acted as a hydrophobic additive and thus promoted the transition from an oil in water (O/W) microemulsion (${\mu}E$) in equilibrium with an excess oil phase to a three-phase region containing excess water, excess oil, and a middle-phase microemulsion and further to a water in oil (W/O) ${\mu}E$ in equilibrium with the excess water phase. The transition temperature was found to decrease with both increases in the chain length and amount of addition of a cosurfactant. Dynamic behavior studies under O/W ${\mu}E$ conditions showed that an oil drop size decreased with time due to the solubilization into micelles. On the other hand, both the spontaneous emulsification of water into the oil phase and the expansion of oil drop were observed under W/O ${\mu}E$ conditions because of the diffusion of surfactant and water into the oil phase. Under conditions of a three-phase region including a middle-phase ${\mu}E$, both the rapid solubilization and emulsification of the oil into aqueous solutions were found mainly due to the existence of ultra-low interfacial tension. Dynamic interfacial tension measurements have been found to be in a good agreement with dynamic behavior results.

• Journal of the Korean Ceramic Society
• /
• v.49 no.5
• /
• pp.417-422
• /
• 2012

Copper nano particles have been considered as the materials for conductive ink due to its good thermal, electrical conductivity and low cost. However, copper nanoparticles oxidize easily, decreasing dispersion stability and electrical conductivity. Therefore, it is important to develop a method to minimize oxidation of copper nano particles to improve its dispersion stability property in copper nano ink. In this study, copper nano particles were coated with 1-Octanethiol VSAM(Vaporized Self Assembled Multilayers) to prevent oxidation and coated copper powders were dispersed in conductive ink successfully by studying its relationship of different chain length of solvents to 1-Octanethiol coating layer to fabricate nano ink. Various alcohol solvents, such as 1-Hexanol, 1-Octanol, and 1-Decanol were used. The coating layer was observed using FESEM and TEM. Furthermore, dispersion of copper nano particles in nano inks, was characterized using Turbiscan analyzer, viscometer, and contact angle measurement tool.

• Journal of environmental and Sanitary engineering
• /
• v.21 no.1 s.59
• /
• pp.1-11
• /
• 2006

This study was to investigate concentration characteristics of atmospheric PCBs in soil sample and pine needle at rural area. Profiles of PCB congener detected in pine needle and soil sample have a difference that low molecular PCBs mainly existed in pine needle, whereas high molecular PCBs were mainly existed in soil sample because of their different vapor pressure and octanol-air partitioning coefficient($K_{OA}$) of each congeners. Correlation coefficients(r) of PCB congeners simultaneously detected in soil and pine needle were significant (r>0.71, p<0.01), which showed that PCB congeners patterns of atmosphere could be estimated in using pine needle and soil sample indirectly. The contributions(%) of higher molecular PCBs(>penta-CB) to total PCBs in soil sample were higher than those of pine needle and the contribution of lower molecular PCBs(

• Journal of Environmental Health Sciences
• /
• v.41 no.2
• /
• pp.116-125
• /
• 2015

Objective: This study was carried out to use pine needles as a passive air sampler (PAS) for atmospheric polychlorinared dibenzo-p-dioxins/furans (PCDD/Fs). Methods: PCDD/Fs concentrations in ambient air ($C_a$, $pg/m^3$) and deposited pine needles ($C_p$, pg/g dry) were analyzed simultaneously from June 1 to December 31. Air samples were taken using two low volume PUF active air samplers with an overall average air volume of approximately $1,200Sm^3$. Pine needles were collected the end of December near the air sampler. PCDD/Fs was analyzed by HRGC/HRMs. Results: A good correlation was shown ($R^2=0.6357$, p=0.0001) between $C_a$ and $C_p$, but a better correlation ($R^2=0.7372$, p<0.0001) existed between the logarithm of octanol-air partitioning coefficient ($LogK_{oa}$) and Log($C_p/C_a$). The average PCDD/Fs sampling rates from air to pine needles were 0.045($0.018-0.185m^3/day-g\;dry$). Conclusion: It was found that pine needles can be used as PAS for atmospheric PCDD/Fs, and they are especially suitable for long time PAS compared to PUF disk PAS.

• KSBB Journal
• /
• v.14 no.5
• /
• pp.566-571
• /
• 1999

Lactic acid is of interested as the raw material of biodegradable polymer. In this study lactic acid was separated by reactive extraction with mixed tertiary amine extractant dissolved in 1-octanol/n-heptane. Mixed tertiary amine extractant was composed of tripropylamine(TPA) and trioctylamine(TOA). The concentration range of lactic acid is ca. 5wt% which is the concentration of lactic acid obtained from fermentation.Maximum distribution coeficient was obtained at 8:2 weight ratio of TPA/TOA and their extraction efficiencies were above 90%.

• Journal of Pharmaceutical Investigation
• /
• v.31 no.2
• /
• pp.95-100
• /
• 2001

Various alkyl ester prodrugs of diclofenac were synthesized in order to investigate the relationship between their skin permeation characteristics and physicochemical properties. Solubility in various vehicles was measured at room temperature. 1-Octanol/water partition coefficients (Log P) and capacity factors (k') were measured to determine the lipophilicity of the prodrugs. Stability of prodrugs in the skin extract and homogenate was also investigated before conducting the skin permeation studies. Increases in the Log P and capacity factor values were observed when alkyl esters of diclofenac were prepared. Since the aqueous solubility of the prodrugs was not high enough, they were saturated in propylene glycol (PG) for skin permeation studies. Prodrugs were rapidly metabolized to diclofenac, both in skin homogenate and in dermal extract of skin. The skin permeation rate of alkyl ester prodrugs was significantly higher than diclofenac with shorter lag time. Moreover, a parabolic relationship was observed between the permeation rate and the log P values of prodrugs, and the maximum flux was achieved at a log P value of around 4.0.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.4
• /
• pp.163-168
• /
• 2008

Photonic crystal structures have been received considerable attention due to their high optical sensitivity. One of the techniques to construct their structure is the dip-pen lithography (DPN) process, which requires a nano-scale resolution and high reliability. In this paper, we propose a two dimensional photonic crystal array to improve the sensitivity of optical biosensor and DPN process to realize it. As a result of DPN patterning test, we have observed that the diffusion coefficient of the mercaptohexadecanoic acid (MHA) molecule ink in octanol is much larger than that in acetonitrile. In addition, we have designed and fabricated optical waveguides based on the mach-zehnder interferometer (MZI) for application to biosensors. The waveguides were optimized at a wavelength of 1550 nm and fabricated according to the design rule of 0.45 delta%, which is the difference of refractive index between the core and clad. The MZI optical waveguides were measured of the optical characteristics for the application of biosensor.

• Environmental Analysis Health and Toxicology
• /
• v.24 no.3
• /
• pp.251-259
• /
• 2009

This study was conducted to measure the concentration of PCBs in pine needles and soil in urban (Seoul, many artificial sources of PCBs), semi-rural (Anseong, small town located below Seoul in wind direction) and rural areas (Jincheon, rarely artificial sources of PCBs) in which the artificial production amount of PCBs are different. The total PCBs concentrations in pine needles, which did not show big difference in three sampling sites, were 107.5 pg/g (urban), 94.8 pg/g (semi-rural) and 78.8 pg/g (rural) respectively. The low chlorinated PCBs were major component in pine needles and the PCBs congener concentration profile of each sampling area were similar each other, and the octanol-air partitioning coefficient, Koa, highly correlated with the PCBs concentrations in pine needles. The total PCBs concentrations in soil which did show big difference in three sampling sites, were 830.0 pg/g (urban), 314.1 pg/g (semi-rural) and 136.5 pg/g (rural) respectively. The high chlorinated PCBs were major component in soil and the PCBs congener concentration profile of each sampling area were similar each other. There was no similarity between the PCBs concentration of pine needles and those of soil at each site, because of the different mechanism of deposition and volatilization processes of PCBs. The total PCBs concentrations of 2009 became 12.9 times lower than those of 2001. The reduce rate of PCB 28 was the greatest.

• Korean Journal of Environmental Agriculture
• /
• v.12 no.1
• /
• pp.69-80
• /
• 1993

Environmental hazards of a chemical could be assessed by two different approaches : toxicity test and assessment of exposure potentials to human and environmental organisms. For the prediction of environmental fate of chemicals three available computer programs were compared each other and were verified. The results obtained by using these computer programs, PCHEM, EXAMS, and E4CHEM were summarized as follows. The estimated octanol/water partition coefficients by PCHEM were similar to the experimental values in the literature. But the other factors, water solubility and vapor pressure were different from the data in the literature. The simulation results of selected compounds by EXAMS showed similar tendency to the literature results of model field environment. Therefore, this computer program could be utilized to predict the environmental fate of chemicals. E4CHEM program is very simple and this program could predict the ultimate environmental fate of stable chemicals by input of two or three parameters. However, the validity should further be verified in the future field study using more compounds. It is suggested that these approaches could be fully utilized by understanding their limitations to predict the environmental fate of new chemicals under development, to screen the potential environmental pollutants among chemicals already-in use, and to devise measures to minimize the hazards to the environment.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.5
• /
• pp.415-424
• /
• 2001

The concentrations of PCBs (polychlorinated biphenyls) in air and plants (MOrus allba, Allum turberosum) were measured every other week at Hankyong University located in Ansung, Kyoung-ki province, Korea from July to November in 1999. Total concentrations of PCBs in air ranged from 19.8 to 71.9 pg/ $m^3$. It was observed in air that the concentrations of tai-chlorinated biphenyls(CBs) were higher than those of other PCB homologs probably due to their higher vapor pressure. Total concentrations of PCBs in plants ranged from 24.5 to 1,287 pg/g dry weight for Morus allba and 26.5 to 337 pg/g dry weight for Allum turberosum. A positive linear correlation was observed between log plant-air partition coefficients ( $m^3$air/g plant dry weight-defined here as the scavenging coefficient[S.C]) and log octanol-air partition coefficients ( $K_{oa}$ ) for each plant. In this study, slope of log S.C and log $K_{oa}$ for Morus allba, Allum turberosum were 1.07 ($R^2$= 0.83, p<0.01), 0.84 ($R^2$=0.53, p<0.05), respectively. This means that these plants may approach to equilibrium for air-plant partitioning.