• Economic and Environmental Geology
• /
• v.51 no.5
• /
• pp.439-453
• /
• 2018

The Eocene Gyeongju granitoids in SE Korea are alkali feldspar granite (AGR), biotite granite (BTGR), and hornblende biotite granodiorite (HBGD) along Yangsan fault and Ulsan fault. According to their geochemical characteristics, these granitoids are classified as A-type (AGR) and I-type (BTGR and HBGD) granitoids, and regarded that were derived from same parental magma in upper mantle. The hornblende and biotite of AGR as an interstitial phase indicate that influx of F-rich fluid during the crystallization of AGR magma. AGR is enriched LILE (except Sr and Ba) and LREE that indicate the influences for subduction released fluids. The highest HFSE contents and zircon saturation temperature of AGR among the Eocene Gyeongju granitoids may indicate that it was affected by partial melting rather than magma fractionation. These characteristics may represent that the high F contents of AGR was affected by F-rich fluid derived from the subducted slab and partial melting. It corresponds with the results of the REE modeling and the dehydrated fluid component (Ba/Th) modeling showing that AGR (A-type) was formed by the partial melting of BTGR (I-type) with the continual influx of F-rich fluid derived from the subducted slab.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.1
• /
• pp.63-70
• /
• 2009

3D GIS(Geographic Information System) processes, analyzes and presents various real-world 3D phenomena by building 3D spatial information of real-world terrain, facilities, etc., and working with visualization technique such as VR(Virtual Reality). It can be applied to such areas as urban management system, traffic information system, environment management system, disaster management system, ocean management system, etc,. In this paper, we propose video visualization technology based on 3D geographic information to provide effectively real-time information in 3D geographic information system and also present methods for establishing 3D building information data. The proposed video visualization system can provide real-time video information based on 3D geographic information by projecting real-time video stream from network video camera onto 3D geographic objects and applying texture-mapping of video frames onto terrain, facilities, etc.. In this paper, we developed sem i-automatic DBM(Digital Building Model) building technique using both aerial im age and LiDAR data for 3D Projective Texture Mapping. 3D geographic information system currently provide static visualization information and the proposed method can replace previous static visualization information with real video information. The proposed method can be used in location-based decision-making system by providing real-time visualization information, and moreover, it can be used to provide intelligent context-aware service based on geographic information.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.663-666
• /
• 2005

Gas hydrates are ice-like compounds that form at the low temperature and high pressure conditions common in shallow marine sediments at water depths greater than 300-500 m when concentrations of methane and other hydrocarbon gases exceed saturation. Estimates of the total mass of methane carbon that resides in this reservoir vary widely. While there is general agreement that gas hydrate is a significant component of the global near-surface carbon budget, there is considerable controversy about whether it has the potential to be a major source of fossil fuel in the future and whether periods of global climate change in the past can be attributed to destabilization of this reservoir. Also essentially unknown is the interaction between gas hydrate and the subsurface biosphere. ODP Leg 204 was designed to address these questions by determining the distribution, amount and rate of formation of gas hydrate within an accretionary ridge and adjacent basin and the sources of gas for forming hydrate. Additional objectives included identification of geologic proxies for past gas hydrate occurrence and calibration of remote sensing techniques to quantify the in situ amount of gas hydrate that can be used to improve estimates where no boreholes exist. Leg 204 also provided an opportunity to test several new techniques for sampling, preserving and measuring gas hydrates. During ODP Leg 204, nine sites were drilled and cored on southern Hydrate Ridge, a topographic high in the accretionary complex of the Cascadia subduction zone, located approximately 80km west of Newport, Oregon. Previous studies of southern Hydrate Ridge had documented the presence of seafloor gas vents, outcrops of massive gas hydrate, and a pinnacle' of authigenic carbonate near the summit. Deep-towed sidescan data show an approximately $300\times500m$ area of relatively high acoustic backscatter that indicates the extent of seafloor venting. Elsewhere on southern Hydrate Ridge, the seafloor is covered with low reflectivity sediment, but the presence of a regional bottom-simulating seismic reflection (BSR) suggests that gas hydrate is widespread. The sites that were drilled and cored during ODP Leg 204 can be grouped into three end-member environments basedon the seismic data. Sites 1244 through 1247 characterize the flanks of southern Hydrate Ridge. Sites 1248-1250 characterize the summit in the region of active seafloor venting. Sites 1251 and 1252 characterize the slope basin east of Hydrate Ridge, which is a region of rapid sedimentation, in contrast to the erosional environment of Hydrate Ridge. Site 1252 was located on the flank of a secondary anticline and is the only site where no BSR is observed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.4
• /
• pp.601-607
• /
• 1997

This study was designed to investigate the biochemical pollutant marker for diagnosis of marine pollutions by the changes in lipid components of the flounder (Pleuronichthys cornutus) in the Yellow Sea of Korea. Hemoglobin levels in serum of wild flounders in the yellow Sea were significantly lower $(15\~30\%)$ than those of wild flounder in Pohang (control) of the East Sea. Triglyceride (TG) contents in serum of wild flounders in the Yellow Sea were higher $(15\~50\%)$ than those of wild flounder in Pohang. Total and low density lipoprotein (LDL)-cholesterol contents in serum of flounders in the Yellow Sea were significantly higher $(20\~25\%\;and\;15\~35\%,\;respectively)$ than those of wild flounder in Pohang. Atherogenic index (Al) in serum of wild flounders in the Yellow Sea were significantly higher $(10\~60\%)$ than these of wild flounder in Pohang but T-Chol/PL ratios showed almost no change in serum of flounders in the Yellow Sea we examined. These results suggest that near-coastal water as well as neritic water of the Yellow Sea might be affected by pollutant input.

• Korean Journal of Remote Sensing
• /
• v.30 no.1
• /
• pp.127-136
• /
• 2014

When the mouth of the Nakdong River, opens its floodgate, thousands of tons of litter should flown into the South Sea, moving towards nearby coast, thus causing serious social and economic damage. For this reason, in the present study, research was performed on one certain area in northeast coast of Geoje island, which is assumed as area damaged due to rainy season and typhoon in 2012, and research for trace of movement route was implemented by using buoy to identify characteristic of movement of floating debris caused from Nakdong River. Flows related to the movement of floating debris was also identified by analyzing ocean meteorological environment. As a result of the study, total 40 tons of litter composed of grasses and trees(or plants litter) were flown into Heungnam beach on 16th, Jul which is the rainy season. Plus, the location tracking buoy, which was dropped when the typhoon SANBA was coming, was passed by southern sea of Gadeok-do and was flown into Geoje beach 1 ~ 2 days after it was dropped. The wind direction was mostly northeasterly wind around the Geoje beach at the time the buoy and floating debris were flown into northeast coast and there was common sea surface currents which was flowing into the coast.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_1
• /
• pp.103-119
• /
• 2020

Recently, the rapid redeposition and erosion of rivers artificially created by climate change and the Four Rivers Restoration Project is questionable. According to the revised law in Korea, the river management agency will periodically carry out bed changes surveys. However, there are technical limitations in contrast to the trend of increasing spatial coverage, density and narrowing of intervals. National organizations are interest in developing innovative bed changessurvey techniquesfor efficiency. Core of bathymetry survey is to measure the depth of rivers under a variety of river conditions, but that is relatively more risky, time-consuming and expensive compared to conventional ground surveys. To overcome the limitations of traditional technology, echo sounder, which has been mainly used for ocean depth surveying, has been applied to rivers. However, due to various technical limitations, it is still difficult to periodically investigate a wide range of areas. Therefore, technique using the remote sensing has been spotlighted as an alternative, especially showing the possibility of depth measurement using spectral characteristics. In this study, we develop and examine a technique that can measure depth of water using reflectance from spectral characteristics. As a result of applying the technique proposed in thisstudy, it was confirmed that the measured depth and the correlation and error corresponding to 0.986 and 0.053 m were measured in the depth range within 0.95 m. In the future, this study could be applied to the measurement of spatial depth if it is applied to the hyperspectral sensor mounted on the drone.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.877-882
• /
• 2014

The reduction of CO2 emission has been discussed in the Marine Environment Protection committee in the International Maritime Organization as the biggest causes of GHG for the purpose of indexing CO2 amounts released into the atmosphere from ships. Accordingly, various methods including the change in the hull design to improve energy efficiency, the coating development to reduce friction resistances, the additives development for improving thermal efficiency in an engine, the low-speed operation to reduce fuel consumptions, and etc. have been applied. The main engine of a ship is an electronic engine for improving the efficiency of the whole load area. However, marine generator engines still use mechanical drive engines in intake, exhaust, and fuel injection valve drive cams. In addition, most of marine generator engines in ships apply a part-load operation of less then 80% due to an overload protection system. Therefore, marine auxiliary diesel engine set at 100% load is necessary to readjust in order to efficient operation because of part-load operation. The objective of this study is to report the results of the part-load fuel consumption improvement by injection timing readjust to identifying the operational characteristics of a marine generator engine currently operated in a ship.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.4
• /
• pp.335-345
• /
• 2000

Physical and acoustic properties of the Southeastern Yellow Sea Mud (SEYSM) of Korea were studied by using 10 piston cores. The data were also compared with mudbelt sediments in the South Sea and the East Sea (southeastern inner shelf) of Korea. The sediments were mainly composed of homogeneous silt. Sandy mud and mud were minor components. The major source of sediment in the study area is probably the Keum River. Finegrained sediments discharged from the river are transported southward by coastal current, resulting in a gradual southward increase in porosity and a decrease in wet bulk density and sound velocity. The mean grain size especially appears to be the most important variable to determine the physical properties and velocity. The variations of physical properties with burial depth are dependent more strongly on sediment texture (especially, silt content) than compaction and/or consolidation. Correlations between the physical properties and the sediment texture show slight deviations from those of the East Sea and the South Sea of Korea in spite of similar pattern within the limiting values. This is probably due to the differences in silt contents, sedimentary environments, mineral compositions, and gas contents.

• Development and Reproduction
• /
• v.12 no.1
• /
• pp.41-49
• /
• 2008

Ultrastructural changes occurring during the course of development and degeneration of oocytes in female Ruditapes philippinarum (Adams & Reeve, 1850) are described for clams collected from Gomso Bay, Korea. During the early stages of oogenesis, desomosome-like gap junctions localized between the early vitellogenic oocyte and the follicle cells. Vitellogenesis occurs through a process of autosynthesis, involving the combined activity of the Golgi complex, mitochondria and rough endoplasmic reticulum, and heterosynthesis in which extraovarian precursors are incorporated into oocytes by endocytotic activity, involving the basal region of the early vitellogenic oocytes prior to the formation of the vitelline envelope. The follicle cells appear to play an integral role in vitellogenesis and oocyte degeneration: phagocytosis and intracellular digestion of products originating from oocyte degeneration. These functions can permit a transfer of yolk precursors necessary to vitellogenesis, and they can accumulate nutrients in the cytoplasm, as glycogen and lipids, which can be employed by the vitellogenic oocyte. During the period of oocyte degeneration, follicle cells may have lysosomal system for breakdown, and resorb various phagosomes in the cytoplasm for nutrient storage. But follicle cells probably are not the major source of yolk precursors in vitellogenesis.

• Development and Reproduction
• /
• v.13 no.2
• /
• pp.115-122
• /
• 2009

Spermatogenesis and ultrastructural characteristics of sperm of brackish water diploid Corbicula japonica were investigated by electron microscope observations. Based on the cytological studies, the spermatozoon of this species (brackish water diploid) C japonica is approximately 55 ${\mu}m$ in length. The sperm head (about 12 ${\mu}m$ long) is elongated and tapers with a slight curve. Sperm nucleus is about 7.90 ${\mu}m$ long, and the acrosome is about 2.70 ${\mu}m$ long: The morphologies of the sperm nucleus type and the acrosome shape of this species are a long arrow-like type and long cone-like shape, respectively. The sperm head of this species (external fertilization, dioecious and oviparous species) is partially modified from that of the primitive type, as seen in triploid Corbicula species (internal fertilization, hermaphrodite and ovoviparous species), reported by some authors. However, this species produces uniflagellate spermatozoa, unlike freshwater triploid hermaphroditic clams being possessed of partially modified biflagellate spermatozoa. Diploid C japonica is similar to those of other bivalves being possessed of a short midpiece containing four mitochondria surrounding the centrioles. The axoneme of the sperm tail flagellum consists of nine pairs of microtubules at the periphery and a pair at the center. The axoneme of the sperm tail shows a 9+2 structure, and from uniflagellate sperm cross sectioned, in particular, wing-like axonernal lateral fins are observed, as seen in external fertilization fishes.