• 한국지리정보학회지
• /
• 제24권1호
• /
• pp.40-53
• /
• 2021

해양연구를 위해 사용하는 연구선은 계획된 연구해역으로 이동하여 연구목적에 맞는 해양관측을 수행한다. 한국해양과학기술원(KIOST, Korea Institute of Ocean Science & Technology)이 보유하고 있는 5척의 연구선에는 항해 중에 상시 관측할 수 있는 GPS, 수심, 기상, 표층 수온 및 염분 측정 장비가 탑재되어 있다. 이러한 상시관측 장비를 통해 생산되는 데이터를 체계적으로 관리하고 활용하기 위한 정보 플랫폼이 요구된다. 따라서 연구선 운항계획에서부터 연구선 운항 중 관측, 데이터수집, 데이터처리, 데이터저장, 표출 및 제공서비스에 이르는 일련의 업무 분석을 통해 업무절차를 정의하였다. 업무 절차의 각 단계 별 기능 설계를 거친 후, WebGIS 기반의 정보 플랫폼인 KUMOS(KIOST Underway Meteorological & Oceanographic Information System)를 구축하였다. 연구선 항해 중에 생산되는 데이터는 시·공간적 변화가 있는 특성이 있어 이러한 변동성을 고려한 데이터의 품질관리 체계를 개발하였다. 데이터의 체계적인 관리와 서비스를 위해 KUMOS 통합DB를 구축하고 연구선 항적, 데이터 표출, 검색 및 제공 등의 기능을 구현하였다. KUMOS에서 제공하는 데이터 셋은 연구선의 항해 별 운항결과리포트(cruise report), 원시데이터(raw data), 품질관리 플래그(Quality Control(QC) flagged data) 데이터, 필터 데이터(filtered data), 항적도 데이터(cruise track line), 데이터 리포트(cruise data report) 등으로 구성되어있다. 본 연구를 통해 개발한 KUMOS의 기능 별 업무처리 절차와 체계는 연구선 항해 중 상시관측이 가능한 연구선을 보유하고 있는 국내 해양관련 기관 및 대학에도 벤치마킹 역할을 할 것으로 기대된다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권2호
• /
• pp.109-116
• /
• 2017

In this paper, we propose an Internet of Things (IoT) platform for ocean observation buoys. The proposed system consists of various sensor modules, a gateway, and a remote monitoring site. In order to integrate sensor modules with various communications interfaces, we propose a controller area network (CAN)-based sensor data packet and a protocol for the gateway. The proposed scheme supports the registration and management of sensor modules so as to make it easier for the buoy system to manage various sensor modules. Also, in order to extend communication coverage between ocean observation buoys and the monitoring site, we implement a multi-hop relay network based on a mesh network that can provide greater communication coverage than conventional buoy systems. In addition, we verify the operation of the implemented multi-hop relay network by measuring the received signal strength indication between buoy nodes and by observing the collected data from the deployed buoy systems via our monitoring site.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.459-462
• /
• 2006

The diffuse attenuation coefficient for down-welling irradiance ($K_d$) is an important parameter for ocean studies including remote sensing applications. For the vast ocean, ocean color remote sensing is the only possible means to get the fine-scale measurements of $K_d$. To develop a technique of estimating $K_d$ from remotely sensed data, the following underwater optical parameters (absorption coefficient (a), attenuation coefficient (c), scattering coefficient (b), diffuse attenuation coefficient ($K_d$), etc.) have been studied. For this research we conducted the field campaign around the Yellow Sea at $8{\sim}9$ June, 2006. We obtained a set of underwater optical parameter data: down-welling irradiance ($E_d$), up-welling irradiance ($E_u$) and up-welling radiance ($L_u$) using TriOS optical sensors and a, c coefficient using Spectral Absorption and Attenuation Meter (AC-S). We then derived $K_d$ values from $E_d$ for each depth.

• 대기
• /
• 제28권1호
• /
• pp.99-112
• /
• 2018

In this study, the accuracy of ocean analysis data, which are produced from the Korea Meteorological Administration (KMA) Nucleus for European Modelling of the Ocean/Variational Data Assimilation (NEMO/NEMOVAR, hereafter NEMO) system and the HYbrid Coordinate Ocean Model/Navy Coupled Ocean Data Assimilation (HYCOM/NCODA, hereafter HYCOM) system, was evaluated using various oceanic observation data from March 2015 to February 2016. The evaluation was made for oceanic thermal environments in the tropical Pacific, the western North Pacific, and the Korean peninsula. NEMO generally outperformed HYCOM in the three regions. Particularly, in the tropical Pacific, the RMSEs (Root Mean Square Errors) of NEMO for both the sea surface temperature and vertical water temperature profile were about 50% smaller than those of HYCOM. In the western North Pacific, in which the observational data were not used for data assimilation, the RMSE of NEMO profiles up to 1000 m ($0.49^{\circ}C$) was much lower than that of HYCOM ($0.73^{\circ}C$). Around the Korean peninsula, the difference in RMSE between the two models was small (NEMO, $0.61^{\circ}C$; HYCOM, $0.72^{\circ}C$), in which their errors show relatively big in the winter and small in the summer. The differences reported here in the accuracy between NEMO and HYCOM for the thermal environments may be attributed to horizontal and vertical resolutions of the models, vertical coordinate and mixing scheme, data quality control system, data used for data assimilation, and atmosphere forcing. The present results can be used as a basic data to evaluate the accuracy of NEMO, before it becomes the operational model of the KMA providing real-time ocean analysis and prediction data.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.390-395
• /
• 1999

Ocean Scanning Multispectral Imager (OSMI) is a payload on the Korean Multi-purpose SATellite (KOMPSAT) to perform worldwide ocean color monitoring for the study of biological oceanography KOMPSAT will be launched in the middle of November this year. The radiometric performance of OSMI is analyzed for various gain settings in the viewpoint of the instrument developer for OSMI calibration and application based on its ground performance measurement data for 8 primary spectral bands of OSMI. The radiometric response linearity and dynamic range are analyzed for the image radiometric calibration and the estimation of OSMI image quality for the ocean remote sensing area. The dynamic range is compared with the nominal input radiance for the ocean and the land. The noise equivalent radiance (NER) corresponding to the instrument radiometric noise is compared with the radiometric resolution of signal digitization (1-count equivalent radiance). The best gain setting of OSMI for ocean monitoring is recommended. This analysis is considered to be useful for the OSMI mission and operation planning, the OSMI image data calibration, and users' understanding about OSMI image quality.

• Journal of information and communication convergence engineering
• /
• 제9권5호
• /
• pp.523-529
• /
• 2011

In this paper an inter-layer protocol, referred to as a Multi-Network Selector (MNS) is proposed for multiband maritime networks. A MNS is located between the data-link layer and the network layer and performs vertical handover when a ship moves another radio network. In order to provide seamless data transfer to different radio networks, the MNS uses received signal strength (RSS) and ship's location information as decision parameters for vertical handover, which can avoid ping-pong effect and reduces handover latency. In addition, we present related issues in order to implement the MNS for a multiband maritime network.

• 한국수산과학회지
• /
• 제20권5호
• /
• pp.457-462
• /
• 1987

Stochastic stability criterias for ocean wave analysis add simulation are studied using the data simulated by the linear superposition method. To clarify the criterias, the effects of the simulation parameters on the variance of stochastic properties of ocean waves are investigated, and the stable conditions of the parameters are estimated through the comparative study on the stochastic properties of simulated waves and well-known ocean waves. The simulation parameters considered are high frequency cut-off, data length, and number and phase angle of component waves. Statistical characteristics analysed are wave height, period and steepness, and the formation of groups of higher waves, resonance periods, steeper higher waves and extreme run-length of the run.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.307-310
• /
• 2006

Underwater ambient noise originating from the geophysical, biological, and man-made acoustic sources contains much information on the sources and the ocean environment affecting the performance of the sonar equipments. In this paper, a set of feature vectors of the ambient noises using MFCC is proposed and extracted to form a data base for the purpose of identifying the noise sources. The developed algorithm for the pattern recognition is applied to the observed ocean data, and the initial results are presented and discussed.

• 대한원격탐사학회지
• /
• 제16권2호
• /
• pp.135-143
• /
• 2000

Ocean Scanning Multispectral Imager (OSMI) is a payload on the Korean Multi-Purpose SATellite (KOMPSAT) to perform global ocean color monitoring for the study of biological oceanography. HOMPSAT was launched 21 December 1999. The radiometric performance of OSMI is analyzed for various gain settings in the viewpoint of the instrument developer for OSMI calibration and application based on its ground performance data measured before launch. The radiometric response linearity and dynamic range are analyzed and the dynamic range is compared with the nominal input radiance for the ocean and the land. The noise equivalent radiance (NER) corresponding to the instrument radiometric noise is compared with the radiometric resolution of signal digitization (1-count equivalent radiance). The best gain setting of OSMI for ocean monitoring is recommended. This analysis is considered to be useful for the OSMI mission and operation planning, the OSMI image data calibration, and users' understanding about OSMI image quality.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.605-616
• /
• 2020

The construction quality control of hull blocks is of great significance for shipbuilding. The total station device is predominantly employed in traditional applications, but suffers from long measurement time, high labor intensity and scarcity of data points. In this paper, the Terrestrial Laser Scanning (TLS) device is utilized to obtain an efficient and accurate comprehensive construction information of hull blocks. To address the registration problem which is the most important issue in comparing the measurement point cloud and the design model, an automatic registration approach is presented. Furthermore, to compare the data acquired by TLS device and sparse point sets obtained by total station device, a method for key point extraction is introduced. Experimental results indicate that the proposed approach is fast and accurate, and that applying TLS to control the construction quality of hull blocks is reliable and feasible.