• 수산해양기술연구
• /
• 제55권4호
• /
• pp.402-410
• /
• 2019

This paper deals with the disturbance observer (DOB) based sliding mode control (SMC) for a DC motor to control motor rotating speed precisely and to ensure strong robustness against disturbance including load torque and parameter variation. The reason of steady state error in speed on conventional SMC without DOB is analyzed in detail. Especially, the suggested DOB is designed to prevent measuring noise and harmonics caused by derivative operation on rotating speed. The control performance of the DOB based SMC is evaluated by the various simulations. The simulation results showed that the DOB based SMC had more robust performance than the SMC system without DOB. Especially, precise speed control was possible even though motor parameter variation and load torque was added to the system.

• 제어로봇시스템학회논문지
• /
• 제12권7호
• /
• pp.637-643
• /
• 2006

Generally, the tracking performance of optical disk drive(ODD) system can be improved using a disturbance observer(DOB). However, a DOB is not easily applied in an ODD system because an additional microprocessor, such as a digital signal processor(DSP), is needed. This paper shows how a DOB system can be replaced by the error-based modified disturbance observer(EM-DOB) when two mathematical conditions are satisfied. Due to the simplified structure of EM-DOB, the algorithm is easily implemented as an analog circuit, which is suitable for the ODD servo system. Additionally, in these algorithms, disturbances rejection performances can be tuned as Q filter parameters. Similar to a DOB system, three design guidelines of a Q filter can be applied. Experimental results of DOB and EM-DOB are evaluated under forced disturbances.

• 제어로봇시스템학회논문지
• /
• 제14권3호
• /
• pp.232-235
• /
• 2008

This paper presents an LMI-based method to design reduced order observers by which we can substitute full order sliding mode observers for a class of uncertain time-delay systems. We show that a reduced order observer can be constructed as long as the uncertain system satisfies the previous LMI existence conditions of a full order sliding mode observer. And we give explicit formulas of the reduced order observer gain matrices. Finally, we give a simple LMI-based design algorithm, together with a numerical design example.

• 제어로봇시스템학회논문지
• /
• 제21권7호
• /
• pp.615-620
• /
• 2015

DOB (Disturbance Observer) is an useful control method for estimating the disturbance applied to dynamic systems. Disturbance observer can be used to implement a robust control system to generate a control input for rejecting the disturbance, and it can be also used to estimate the disturbance to obtain information. The system that uses disturbance estimation is investigated for high performance control such as automatic door systems, walking robot and electric power steering system in vehicles. In this paper, a novel disturbance observer which is called disturbance and current observer for estimating load torque in the motor system is proposed. The difference between the DOB for disturbance rejection and DCOB is mathematically verified. Current and angular velocity are required for estimating the load torque of the motor in DOB. However, the DCOB can estimate load torque and current without current sensor. DCOB is designed based on modeling of the motor system. Appropriate Q-filter is selected and the applicability of DCOB is verified by simulation. The estimated disturbance and current of the electric motor can be verified without current sensor, as experiments of the actual motor system.

• 수산해양교육연구
• /
• 제29권3호
• /
• pp.778-784
• /
• 2017

This paper proposes a sensorless speed control of a permanent magnet synchronous motor (PMSM) based on an adaptive sliding mode observer (SMO) for electric propulsion system of small ships. An adaptive observer gain is proposed based on the Lyapunov's stability criterion to reduce the chattering problem at any speed operation instead of the constant gain observer. Furthermore, a cascade low-pass filter with variable cut-off frequency is suggested to strengthen the filtering capability of the observer. The experimental results from a 1.5 kW PMSM drive are provided to verify the effectiveness of the proposed adaptive SMO. The result shows that the proposed method gives good speed control performances even when the PMSM operates at 0.5% from its rated speed value.

• 전력전자학회논문지
• /
• 제16권1호
• /
• pp.1-10
• /
• 2011

본 논문에서는 영구자석 동기전동기(PMSM)의 강인한 속도 제어를 위하여 퍼지 부하 토크관측기와 퍼지 속도제어기를 제안한다. 또한, 퍼지 부하 토크관측기와 퍼지 속도제어기가 존재하기 위한 LMI 조건을 유도하고, 관측기 및 제어기의 이득을 계산한다. 제안된 제어시스템의 안정도가 보장됨을 해석적으로 증명한다. 본 연구에서 제안된 관측기 기반의 퍼지 속도제어기의 성능을 검증하기 위하여, 시뮬레이션 및 실험 결과가 주어졌다. 본 결과를 통하여 제안된 제어 알고리즘은 영구자석 동기전동기의 속도를 정확하게 제어할 수 있음을 검증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1299-1306
• /
• 2017

This paper presents a boundary tracking control of an agent. To this end, it is shown that the boundary tracking problem can be reformulated into a robust control of uncertain double integrator first. Then, a disturbance observer (DOB) based control is proposed solving the robust control problem. Unlike the existing results in the literature, the proposed DOB based control requires only the local position measurement of the boundary (not the gradient information). The performance of the proposed control is demonstrated for two cases: the measurement of the boundary is given in a continuous or discrete manner. Finally, it is shown that the proposed control can be used for environmental monitoring as well by showing that the agent follows a level curve of real environmental monitoring data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2399-2401
• /
• 2001

This Paper presents a positioning control method of the LBLDCM(Linear Brushless DC Motor) under friction. The friction may cause steady state position error. So it is necessary to consider friction effect for precision positioning control. The proposed control method uses disturbance observer algorithm and friction compensation. The experimental results of the proposed control method based on the disturbance observer are presented to show its effectiveness.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권6호
• /
• pp.408-414
• /
• 2004

In this paper, a disturbance observer based sliding mode control is proposed to attenuate disturbance responses in an active magnetic bearing system, which is subject to base motion. An algorithm which decouples disturbance observation dynamics from sliding mode dynamics is suggested. This algorithm preserves the robustness of the sliding mode control and satisfies reachability condition in the presence of external disturbance and parameter uncertainties. Along with experimental results, it is shown that the proposed control is effective in disturbance rejection without any additive disturbance measurement.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1871-1876
• /
• 2005

In this paper, We present a new nonlinear adaptive control law using a disturbance accommodating control (DAC) observer for a Japanese automatic landing flight experiment vehicle called ALFLEX. A future spaceplane must have ability to deal with greater fluctuations in the stability and control derivatives of flight dynamics, because its flight region is much wider than that of conventional aircraft. In our previous studies, digital adaptive flight control systems have been developed based on a linear-parameter-varying (LPV) model depending on dynamic pressure, and obtained good simulation results. However, under previous control laws, it is difficult to accommodate uncertainties represented by disturbance and nonlinearity, and to design a stable flight control system. Therefore, in this study, we attempted to design a nonlinear adaptive control law using the DAC Observer and inverse dynamic methods. A good tracking property of the obtained system was confirmed in numerical simulation.