• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.1 s.119
• /
• pp.64-68
• /
• 2007

The oak and pine charcoal were used to develop the inner packaging material for maintaining the freshness of vegetables and fruits, and to investigate the possibility in the application for inner packaging. The effects of the charcoal type, species, particle size, and grammage on the adsorption efficiency of ethylene gas were studied. White charcoal has superior ethylene gas adsorption performance to those of black charcoal. Pine charcoal was superior to oak charcoal in the ethylene gas adsorption. Higher gas adsorption was obtained by the higher grammage sheet. The difference in the adsorption efficiency was not significant between ONP and KOCC.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.5
• /
• pp.601-614
• /
• 2013

The commercial charcoal kiln was projected the largest source of biomass burning sector in Korea. Commercial charcoal kiln was operated to emit air pollutants into the air without any air pollution prevention equipment. The object of this field survey was to understand characteristics of air pollutants concentration and emission factors and to provide preliminary data for effective processor from oak charcoal manufacturing process. As result of field survey, TSP, $PM_{10}$ and $PM_{2.5}$ concentration from charcoal kiln were 400~37,000 $mg/m^3$. These values were over the 100 $mg/m^3$ in TSP, this value was effluent quality standard of Clean Air Conservation Act. The average concentration of CO, $SO_2$ and TVOC were 2~5%. 0~110 ppm and 820~10,000 ppm respectively. The emission factors were 42.4 g-PM/kg-oak in TSP, 40.3 g-PM/kg-oak in $PM_{10}$, 38.2 g-PM/kg-oak in $PM_{2.5}$, 182.5 g-CO/kg-oak, 1.0 g-NO/kg-oak, $SO_2$ 0.2 g-$SO_2/kg$-oak and 104.4 g-TVOC/kg-oak. The part of commercial charcoal kiln had air pollution prevention equipment but it was difficult to work properly. Much wood tar excreted in exhaust emissions from oak charcoal manufacturing process. This wood tar was cause of many troubles sticking in the air pollutant prevention equipment. For handling particulate matters and gaseous air pollutants from oak charcoal manufacturing process in biomass burning, air pollutant prevention equipment design and management needs preprocessor for removal wood tar.

• Journal of Animal Environmental Science
• /
• v.14 no.2
• /
• pp.91-96
• /
• 2008

The odours from spreading the slurry, manure storage tanks, and the stall are a source of annoyance for the neighbors and sometimes even become a case for civil appeal. Reducing the odourant and ammonia emission is an urgent need to be addressed. It is known that brown coal and oak charcoal have an ability to absorb odour. We designed an experiment set in lab scale and used the brown coal and oak charcoal as additives in the test to reduce odour. The test are divided into two categories; namely aeration and no-aeration. The additives were added to the each sample at a concentration of 5% and 10% of total base solids, besides the control samples. We carried out the Phenate Method for ammonia analyzing. In the non-aerated case, the results showed a reducing efficiency of 23.7% and 26.4% with an addition rate of 5% and 10% of additives, respectively. In the aerated test, the reducing efficiency of ammonia was 17.8% and 21.0% with an addition rate of 5% and 10% of additives, respectively. In case of oak charcoal, non-aeration showed removal efficiencies of ammonia at 15.9% and 16.1% with addition rates of 5% and 10%, respectively, With aeration, they were 11.4% and 26.4% with addition rates of 5% and 10% oak charcoal, respectively. The tests show that brown coal and oak charcoal have a reducing effect on ammonia emissions.

• Preventive Nutrition and Food Science
• /
• v.8 no.4
• /
• pp.336-342
• /
• 2003

The effects of cultivation methods (cultivation of curled-shaped type, M-1; conventional cultivation, M-2; growing after treatment with a growth regulator, M-3; cultivation by the combination of M-1 and treatment with oak charcoal, M-4) on the quality characteristics of soybean sprouts were studied by the measurement of growth characteristics. This study also investigated the changes in shelf-life stability of the new soybean sprouts (NSB) using M-4, which was cultivated with oak charcoal and treated with antimicrobial Citrus sunki seed extract. Among the soybean sprouts grown for six days at the high temperature and humidity environment (90$\pm$5% RH, 25$\pm$1$^{\circ}C$), M-1 revealed no significant difference in terms of quality, such as the harvest yield, the rot rate and the growth characteristics when compared with M-2. M-3 showed no significant difference in growth characteristics, of hardness, and sensory evaluation scores when compared with the soybean sprouts grown by conventional methods. NSB had a low number of total microorganisms and had a better appearance after five days of storage than did the control group (M-2). These findings demonstrate that chemical-free and clean soybean sprouts can be grown by combining oak charcoal and antimicrobial Citrus sunki seed extract, thereby meeting the consumer demand for safe, chemical free sprouts.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.455-458
• /
• 2006

The oak and pine charcoal were used to develop the internal packaging raw material for maintaining the freshness of vegetables and fruits, and to investigate the possibility in the application for pulp mold packaging. The effects of the charcoal type, species, particle size, and grammage on the adsorption efficiency of ethylene gas were studied. White charcoal has superior ethylene gas adsorption performance to those of black charcoal. Pine charcoal was superior to oak charcoal in the ethylene gas adsorption. Higher gas adsorption was obtained by the higher grammage sheet. The difference in the adsorption efficiency was not significant between ONP and KOCC.

• Research in Plant Disease
• /
• v.28 no.4
• /
• pp.209-220
• /
• 2022

Charcoal canker of oak, which has recently increased in southern Iran, could pose a serious threat to the entire forest ecosystem in the near future. In addition, it seems that climate change and its consequences, such as drought in the southern regions of Iran, have exacerbated this phenomenon. Consequently, the objective of this study was to identify the fungal pathogens that could cause charcoal canker disease in the oak forests of South Zagros. It was also sought to find associations between changes in the occurrence/exacerbation of charcoal canker disease under non and intense drought stress in non-inoculated or inoculated Quercus brantii seedlings. In total, 120 isolates were obtained from eight oak forests located in the Zagros Mountains of Southern Iran, Kohgiluyeh & Boyer-Ahmad and Fars provinces, which were classified as Biscogniauxia mediterranea based on morphological assessment. Subsequently, molecular assay confirmed the result by phylogenetic inference of internal transcribed spacer-rDNA regions, α-actin, and β-tubulin genes. The results of the pathogenicity test showed that the response of isolates of B. mediterranea (Iran-G1 and Iran-M70) was varied in different environments for the measured necrotic lesion length. In comparison with the control moisture treatments (non-stress), the necrotic lesion length in inoculated treatments increased under intense drought stress. In general, inoculated oak seedlings' exposure to water-deficient stress by the pathogen of B. mediterranea could affect the spread/severity of the charcoal canker disease.

• Journal of Biosystems Engineering
• /
• v.35 no.5
• /
• pp.316-322
• /
• 2010

The packaging of fruits is very important because appropriate packaging can optimize the maintenance of freshness of fruits during their distribution in low or normal temperatures until the products reach consumers. The focus of this study was on the use of functional packaging materials for the post-harvest maintenance of the freshness of fruits. Oak charcoal has excellent far infrared emission and ethylene absorption qualities, and we developed a charcoal-processing packaging linerboard to evaluate the possibility for the use of charcoal as a functional packaging material for pears. Oriental pears of the Niitaka cultivar used in this study account for about 70% of pears harvested every year, and are a very popular domestic fruit in Korea. Pears packaged in packaging materials processed with charcoal were of significantly higher quality (p<0.05) than those packaged with conventional packaging materials, suggesting that charcoal-processed packaging materials can be used as functional packaging material for extending the storability and distribution time of fruits. Charcoal-coated linerboard was shown to be the most appropriate packaging material based on its compression strength, ethylene absorption performance, and the firmness and minimal weight loss of pears.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.3
• /
• pp.277-289
• /
• 2019

Herein, a case study discussing the effect of carbonaceous aerosol pollution, which is emitted during the charcoal kiln manufacturing processes or carbonization processes, on the atmospheric environment is presented . In South Korea, in situ analysis of different charcoal production plants specialized in the production of charcoal sauna indicate that the emitted organic carbon (OC) and elemental carbon (EC) aerosols are significantly influenced by the nature of the biomass and technological processes, i.e., treatment or emissions abatement systems for the exhaust effluent gases. In detail, total carbon (TC), which is calculated as the sum of OC and EC emission factors, varied widely from a charcoal production site to another ranging from 21.8 to 35.8 gTC/kg-oak, where the mean value for the considered production sites was approximately 28 gTC/kg-oak (N = 7 and sum = 196.4). Results indicate that the emission factors from a modern charcoal production process in South Korea are quantitatively lower in comparison with the traditional kiln. This study aims to propose advanced wood processes for the production of charcoal from the viewpoint of environmental protection policy and green engineering.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.9 no.1
• /
• pp.47-58
• /
• 2007

New Wild Grape berry weighs approximately 3.7g, which is one fourth of the weight of the general grape wine (12.2g). The pH of New Wild Grape wine is around 3.34, which is lower by 0.3 than that (3.62) of general grape wine. It contains higher organic acids, so it has stronger sour taste. The sugar content of New Wild Grape is 17° Brix, which is higher than that (15° Brix) of general grape wine. The color of New Wild Grape is blackish, owing to the lower lightness, redness, and yellowness compared with those of general grape wine. Depending on the mixing with or without oak tree, there is little difference in the pH, organic acid, reducing sugar, and amount of alcohol after ripening for 1 year. In taste, New Wild Grape wine mixing with oak tree is evaluated better than that of the wine without oak tree. Especially, in the case of the wine mixing with oak tree's sawdust, the quality in color, taste, and smell became improved. After fermentation, the pH of New Wild Grape Wine ripened with oak tree charcoal increased from 3.82 to 3.86, as it gets more oak tree charcoal, and the organic acid decreased from 0.91㎖ to 0.86㎖. However, there is no difference in alcohol amount. Lightness in color tended to be reduced, whereas redness tended to be increased. Adding 3% of oak tree charcoal made the taste and smell improved. When fermenting New Wild Grape Wine with mixing 1% of oak tree's sawdust or 3% of oak tree charcoal, there is little difference in the pH and the organic acid, whereas there is a little difference in those of New Wild Grape Wine without addition of oak tree charcoal. As the addition of oak tree charcoal increased, the lightness and redness became higher. When fermenting New Wild Grape Wine with mixing 1% of oak tree's sawdust or 3% of oak tree charcoal in oak tree barre, the taste became improved.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.1
• /
• pp.29-34
• /
• 2008

The charcoal has been used not only as fuel but also as human health care material since it was used. Charcoal's performances were generally investigated in aspects of energy efficiency and caloric values. This study was conducted in order to increase charcoal's application area and to develop functional paper. Five types of charcoal were used on a basis of gas absorption properties from previous study. Handsheets were made by two methods by internal loading and surface spray on interlayer. Strength properties of internal loading and interlayer spray handsheets were decreased as the charcoal loading increased. Ethylene gas absorption property was higher in both of oak's black charcoal and white charcoal than others. In terms of strength, 5-10% charcoal loading was efficient. Above 10% loading, a rate of strength decrease was higher than that of ethylene gas absorption rate. Formaldehyde absorption property was higher at both of oak's black charcoal and mixed charcoal than others. However, to guarantee enough charcoal loading should be higher than 95 $g/m^2$ for sufficient formaldehyde absorption.