급속냉각기술로 제조된 $Nd_{10.5}Fe_{79}Co_{2}Zr_{1.5}B_{7}$ 합금분말을 사용하여 사출성형용 자성 펠렛을 제조하였다. 입도분포가 다른 두 종류의 분말($38~75\;\mu\textrm{m}$ 및 $75~50\;\mu\textrm{m}$)을 사용하여 열가소성(Nylon 6) 펠렛을 제조한 후 자성분말의 임계분율(critical volume fraction) 을 결정하고 수지자석의 성형밀도에 따른 자기특성을 고찰하였다. Nylon 6 수지를 사용한 Nd-Fe-Co-Zr-B계 펠렛은 분말입도가 $38~75\;\mu\textrm{m}$인 경우 임계 부피분율은 70%로 나타났고, 그때의 성형밀도는 이론밀도 의 90%를 상회 했으나 $75~150\;\mu\textrm{m}$ 분말의 경우는 같은 분율에서 이론밀도의 87% 수준에 머물렀다. 최적의 자기특성은 분말에 윤활제로서 silicone oil만을 0.5wt.% 첨가한 경우이며 이때의 자기특성으로, $(BH)_{max}=5.2\;MGOe,\;B_{r}=5.1\;kG$ 그리고 $_{i}H_{c}=8.8\;kOe$의 높은 수준을 보였다. Nylon 6수지자석의 성형밀도를 예측할 수 있는 경험식으로서, ${\rho}(g/cm^{3})=1.1+K.V_{s}$을 얻었으며 K(5.3~5.6)는 자성분말 입도에 따른 기울기 상수이고 $V_{s}$는 분말의 부피분율이다.
CA 저장 사과로 제조한 신선절단 사과의 비타민 C 강화와 품질유지기간을 연장하기 위한 방법을 개발하기 위한 일환으로 신선절단 사과를 10% L-ascorbic acid 용액에 침지처리하고 0.03 mm LDPE, 0.04 mm PP 및 0.08 mm Nylon/PE(질소치환) 필름으로 포장하여 1$0^{\circ}C$에서 저장하면서 포장내 기체농도와 품질변화를 조사하였다. 저장 중 포장내 산소는 Nylon/PE 포장구에서 가장 낮게 l~3%로 유지되었고 다음으로 PP, LDPE 포장구 순이었다. 저장초기 포장내 에틸렌 농도의 증가속도는 Nylon/PE 포장구에서 가장 낮았다. 신선절단 사과의 비타민 C 함량은 241mg/100g으로 강화되었으며, 저장 중에는 저산소 조성 포장조건일수록 ascorbic acid 산화를 억제시켜서 Nylon/PE 포장구에서 가장 높게 유지되었다. 절단사과에서 갈변은 저산소 조성 포장조건일수록 억제하는 경향이었으며 LDPE, PP 및 무포장 절단사과는 저장 6일 후부터 발생되었으나 Nylon/PE 포장 절단사과는 저장 14일 후까지도 발생되지 않았다. 절단사과에서 부패와 이취는 LDPE, PP 및 무포장에서는 저장 9일 후에 인지되었으나 Nylon/PE 포장에서는 저장 14일 후까지도 인지되지 않았다. 이상의 결과에서 볼 때 장기간 CA 저장한 사과로 비타민 C 함량이 강화된 신선절단 사과의 제조가 가능하였고 이의 품질유지에 적합한 포장조건은 산소투과도가 낮은 포장재와 산소 제거 후 밀봉하는 것으로 나타났다.
이소시아네이트기를 말단기로 가진 SBR 프리폴리마를 금속 나트륨을 촉매로 사용하여 ${\varepsilon}$-카프로락탐과 함께 음이온 중합시켜 나일론 6-SBR-나일론 6 블록공중합체를 합성하였다. 촉매 농도의 변화는 반응에 큰 영향을 주지 않았으나 개시제인 SBR 프리폴리마의 농도는 0.5몰%일 때 가장 좋은 결과를 얻었다. 반응온도는 $150^{\circ}C$일 때에 비하여 $185^{\circ}C$일 때가 수득률과 분자량의 증가를 보였다. 합성된 중합체의 적외선 스펙트럼에서 $1,730 cm^{-1}$의 우레탄 카르보닐 흡수띠로부터 블록 공중합체임을 확인하였고 프리폴리마와 나일론의 특성 흡수띠에서의 흡광도비로부터 공중합체의 조성을 추정하였다.
This study was carried out to investigate the effects of dyeing on the mechanical properties, primary hand, total hand value (THV), and total appearance value (TAV) of woven fabrics. Cotton, PET, nylon, cotton/PET, and cotton/nylon woven fabrics were used as test specimens. Each of fabric was dyed under the same conditions as the fabrics for sportswear which consumers have selected as best. Mechanical properties of specimens were measured by KES-FB system and primary hand and THV were calculated by equation KN -201-MDY and KN-301-WINTER respectively. TAV was calculated by KN (eq. 10). The results were as follows: 1. In mechanical properties. tensile energy increased when cotton and two cotton mixture fabrics were dyed and decreased when polyester and nylon fabrics were dyed. Bending rigidity and shear rigidity decreased after all fabrics were dyed except nylon and cotton/ nylon mixture fabrics showing higher rigidities. Cotton fabrics showed higher surface roughness while other fabrics did lower values after dyeing. 2. In evaluation of primary hand and total hand , four primary hands of cotton fabrics so decreased after dyeing that THV were lowered. Numeri, Fukurami, and Sofutosa in primary hand of polyester, cotton/polyester, and cotton/nylon fabrics and Koshi and Numeri of nylon fabrics increased after dyeing and therefore THV of four fabrics were improved. 3. Cotton and polyester fabrics showed higher TAV due to their lower bending and shear rigidity, while nylon and cotton/nylon fabrics did lower values due to their higher shear rigidity. 4. It was proposed that the method of dyeing or treatment for minimizing the decrease of THV of cotton fabrics and TAV of nylon fabrics should be developed.
OPP/PVDC 도포/LDPE 복합 필름과 Nylon/LDPE복합 필름을 사용하여 비엔나 소시지를 포장하며 품질수명을 비교한 결과는 다음과 같다. 두 복합 필름의 투습도와 가스투과도는 PVDC 도포 필름이 현저히 적었다. Nylon복합 필름은 가로, 세로 사이의 신장율이 비슷했으나 PVDC 도포 필름은 가로, 세로의 신장율이 4.5배 정도 차이가 있었다. 비엔나 소시지의 Critical Quality Index로서 VBN 이 더 적합했고 이 VBN 변화치로부터 구한 반응 속도상수로부터 $Q_{10}$치를 계산하여 예측한 품질수명은 $15^{\circ}C$ 저장의 경우 Nylon 복합 필름은 25일, PVDC 도포 필름은 31일, $5^{\circ}C$ 저장의 경우 Nylon복합 필름은 32일, PVDC도포 필름은 41일로 나타났다. PVDC도포 필름의 품질수명이 6일에서 9일정도 더 길었다.
${\varepsilon}$-caprolactam의 음이온 중합반응을 미네랄 오일의 존재하에서 수행하여 오일함침 나일론 6을 합성하였다. 8 phr 미만의 오일이 첨가되었을 때에는 중합반응속도 및 생성물의 분자량에 큰 변화가 없었다. 오일의 첨가에 의해서 생성물의 신율 및 충격강도는 향상되었으며, 표면경도와 인장강도는 저하되었다. 오일함량이 6 phr인 나일론에서 마찰계수는 최소값을 나타내었으며, 이때의 마찰계수값은 오일이 첨가되지 않은 나일론의 32%에 지나지 않았다.
탄소섬유/나일론 수지 복합재료의 계면결합력의 향상을 위해 폴리아크릴로니트릴(PAN)계 탄소섬유의 표면에 실란계, 설파이드계, 이미드계 계면결합제를 이용해서 사이징 처리를 수행하였으며, 사이징 처리된 탄소섬유의 젖음성과 표면자유에너지는 접촉각을 통해 확인하였다. 사이징 처리되어 제조된 복합재료의 기계적 계면물성은 임계응력세기인자를 통하여 확인하였으며, 파단실험 후 파단면은 주사전자현미경을 통해 관찰하였다. 실험결과 실란계로 사이징 처리된 탄소섬유가 다른 사이징 처리에 비해 표면자유에너지가 큰 것을 접촉각 측정을 통해 관찰하였다. 한편 사이징 처리된 탄소섬유 강화 나일론 복합재의 경우 미처리 탄소섬유를 이용한 복합재에 비해 높은 기계적 계면강도를 보였다. 이러한 결과는 섬유의 표면자유에너지가 탄소섬유와 나일론6 기지 사이의 계면결합력의 증대를 유도하여 복합재료의 기계적 계면강도가 증가된 것으로 판단된다.
The purpose of this study was to investigate the dyeing-property and antibacterial activity on nylon fabric dyed with cochineal at variable dyeing conditions. Al, Cr, Fe, Cu and Sn were used as mordants and adsorption was compared with different mordanting methods. The maximum UV-visible absorption band of cochineal extract was 495 nm. The dyeability on nylon fabric was good because of having a amine group. The optimum dyeing conditions of nylon fabrics are dyeing concentration 1.5%(o.w.s), dyeing temperature $60^{\circ}C$, pH 3 and dyeing time 30 minutes. The pre-mordanting method is preferred for Al and Cr, and the post-mordanting one is preferred for Cu, Sn and Fe to achieve better dyeing. The optimum mordanting conditions of wool fabrics dyed with cochineal are mordanting concentration of 0.5%(o.w.s), mordanting temperature $60^{\circ}C$, and dyeing time 30 minutes. Nylon fabrics dyed with cochineal show a little antibacterial activity, but it was increased by Sn mordanting. MIC test results in antibacterial activities revealed that the antibacterial activity of Cu was the highest among mordants, but Sn mordant was the most effective in antibacterial activities after mordanting treatment of nylon fabric. The fastness properties of dyed nylon fabric showd a little worse or a similar level and there was no significant difference between a mordanted and non-mordanted fabric.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제26권2호
/
pp.146-153
/
2000
The purpose of present study is comparing the effect of Teflon Membrane and Nylon Membrane on bone regeneration in rabbit tibia. The 6 defects of $8{\times}8{\times}5mm$ size were drilled with dental handpiece in rabbit tibia, which on left side as an order of Control group(no coverage), Group 1(Nylon $5{\mu}m$ size), Group 3(Nylon $10{\mu}m$ size), and on right side Control group, Group 2($5{\mu}m$ Teflon), Group 4($10{\mu}m$ Teflon). Animals were killed at 7, 10, 14, 42 days to make specimens and observed the difference of healing potentials with light microscopy. The results were as follows ; 1. New bone formation has taken place at 14 days in Guided Bone Regeneration (GBR) group comparing to the Control group of massive inflammatory status. 2. Larger pore membrane allows more favorable healing potentials. Bone formation started earlier in larger membrane pore groups than smaller groups, until 14 days. 3. Bone forming potentials of Teflon membrane group was higher than Nylon membrane groups, Control group has the lowest bone forming potentials. 4. New bone formation was almost ended in 42 days, and there was no difference of bone formation between Nylon and Teflon membrane group of different size. There was no difference of bone formation at final stage(42 days) between Nylon membrane and Teflon membrane of same pore size. So nylon membrane may be clinically usable in guided bone regeneration case with further studies.
Ohtsuka, Mika;Suzuki, Yoshino;Sakai, Tetsuya;Netravali, Anil N.
Fibers and Polymers
/
제5권3호
/
pp.225-229
/
2004
The effect of UV and $^60{Co}$ gamma radiations on the physical and mechanical properties of nylon 6 mono-filaments with different draw ratios has been studied. Specimens were exposed to either up to 25 Mrad of gamma or up to 168 hrs of intense UV irradiation. The results show that nylon mono-filaments exposed to gamma rays, with much higher quantum energy than UV, undergo a larger extent of molecular chain scission. Higher irradiation dose also results in the production of insoluble, macroscopic three-dimensional cross-linked network structure. The amorphous regions with a lower density of cohesive energy (lower molecular orientation) show a higher extent of cross linking reaction whereas amorphous regions with a higher density of cohesive energy (higher orientation) show higher extent of chain scission reaction, irrespective of UV ray or gamma ray irradiation.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.