• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.665-670
• /
• 2006

본 연구에서는 교대 및 교각의 측방유동에 대하여, 경험식과 수치해석 결과를 비교, 분석하였다. 연구결과, Tschebotarioff 제안식과 측방유동지수 판정법이 다른 결과를 나타내어 경험식만으로 측방유동 가능성을 판단할 수 없었다. 수치해석결과, 성토사면 선단 하부지반에서의 측방변위는 심도에 따라 감소하였으며, 연약층 상부 1/3위치에서 최대 측방변위가 발생하였다. 최대침하는 사면선단부에서 발생하였으며 선단부에서 13m 떨어진 위치에서 미소한 최대융기가 발생하였다.

• Advances in concrete construction
• /
• 제5권5호
• /
• pp.493-512
• /
• 2017

Blast loads may considerably affect the response of structures. In previous years, before computer analysis programs, the parameters of blast effects were calculated with empirical methods, consequently some researchers had proposed equations to find out the phenomenon. In recent year's computer analysis programs have developed already, so detailed solutions can be made numerically. This paper describes the blasting response of the structures using numerical and empirical methods. For the purpose, a reinforced concrete retaining wall is modelled using ANSYS Workbench software, and the model is imported to ANSYS AUTODYN software to perform explicit analyses. In AUTDYN software, a sum of TNT explosive is defined 5,5 m away from the wall and solution is done. Numerical results are compared with those of obtained from empirical equations. Similar study is also considered for equal explosive which is the 4 m away from the wall. The results are represented by graphics and contour diagrams of such as displacements and pressures. The results showed that distance of explosive away from the wall is highly affected the structural response of it.

• 한국항공운항학회지
• /
• 제8권1호
• /
• pp.83-95
• /
• 2000

Lift, drag, pitching moment, what we call longitudinal aerodynamic coefficient, effects airplanes directly, so the method to find the accurate result quickly is an important factor from the beginning of the aircraft design. There are different ways to find aerodynamic coefficient such as empirical methods, numerical analysis methods, wind tunnel tests, and finally through an actual flight tests, but choosing the best methods depends on the due date or the cost. The accuracy varies on each design level, but all this methods have relationship to complement and balance each other, so by combining proper methods, the best result can be obtained. At this paper, empirical methods and numerical analysis method were experimented, compared, and reviewed to find the availability of each method and by combining two methods accurate result was obtained. So, we applied this methods to predict the aerodynamic coefficient on cruise configuration aircraft, and was able to obtain more accurate result on the low speed longitudinal aerodynamic coefficient. Also by watching there result, we are able to predict the errors before the actual wind tunnel test.

• 한국지반공학회논문집
• /
• 제38권8호
• /
• pp.67-74
• /
• 2022

지반굴착시 지반안정성 검토를 위한 대상지역의 설정은 이론식 및 경험식 추정방법과 수치해석에 의한 방법으로 구분한다. 일반적으로 적용되는 이론식 및 경험적 추정 방법은 Peck(1969)의 곡선방법, Caspe(1966)의 방법 및 Clough 등(1990)의 방법이 있다. 수치해석에 의한 방법은 과업구간의 현황(지반조건이 가장 취약한 구간, 최대 굴착심도 구간, 주요 인접 구조물 위치 구간 등)을 종합적으로 고려하여 가장 취약한 단면에 대해 2차원 및 3차원 수치해석을 수행한 결과를 반영하였다. 본 논문에서는 위와 같은 이론식 및 경험식, 수치해석을 통해서 000선 복선전철 민간투자사업의 수직구 구간 및 터널 구간 굴착시 영향범위를 설정한 사례를 보여주고자 한다.

• Communications for Statistical Applications and Methods
• /
• 제4권2호
• /
• pp.465-471
• /
• 1997

This paper deals with the problems of obtaining some Bayesian and empirical Bayesian Predictive densities and prediction intervals of a future observation $X_{(\tau+\gamma)}$ in the Rayleigh distribution. Using an inverse gamma prior distribution, some prodictive densities and prodiction intervals are proposed and studied. Also the behaviors of the proposed results are examined via numerical examples.

• 한국항공운항학회지
• /
• 제27권2호
• /
• pp.9-15
• /
• 2019

The initial buckling of thin walled structures does not result in immediate failure. This post buckling capability is used to achieve light weight design, and final failure of thin walled structure is called crippling. To predict the failure load, empirical methods are often used for thin walled structures in design stage. But empirical method accuracy depend on geometry. In this study, experimental, empirical and numerical study of the crippling behavior of I-section beam made of carbon-epoxy are performed. The progressive failure analysis model to simulate the crippling failure is evaluated using the test results. In this study, commercial software LS-DYNA is utilized to compute the collapse load of composite specimen. Six kinds of specimens were tested in axial compression where correlation between analytical and experimental results has performed. From the results, we have partially conclude that the flange width-to-thickness ratio is found to influence the accuracy of empirical and numerical method.

• 터널과지하공간
• /
• 제13권4호
• /
• pp.245-259
• /
• 2003

Refering to the articles "Squeezing rocks in tunnels(Barla, 1995)" and "Tunnelling under squeezing rock conditions(Barla 2002)" this article deals with technologies for design, stability analysis and construction of the tunnel being driven in the squeezing rock mass. The definition of this type of behavior was proposed by ISRM(1994). The identification and quantification of squeezing is given according to both the empirical and semi-empirical methods available to anticipate the potential of squeezing problems in tunnelling. Based on the experiences and lessons learned in recent years, the state of the art in modem construction methods was reported, when dealing with squeezing rock masses by either conventional or mechanical excavation methods. The closed-form solutions available for the analysis of the rock mass response during tunnel excavation are described in terms of the ground characteristic line and with reference to some elasto-plastic models for the given rock mass. Finally numerical methods were used for the simulation of different models and for design analysis of complex excavation and support systems, including three-dimensional conditions in order to quantify the influence of the advancing tunnel face to the deformation behavior of the tunnel.

• 수산해양기술연구
• /
• 제56권4호
• /
• pp.374-383
• /
• 2020

At ship design stage, the maneuverability is generally estimated based on the empirical formula or the computational fluid dynamic (CFD), which is one of the numerical simulation methods. Using the hydrodynamic derivatives derived through these methods can quantitatively estimate the maneuverability of target vessels and evaluate indirect maneuverability. Nevertheless, research on estimating maneuverability is insufficient for ships not subject to IMO maneuverability standard, especially fishing vessels, and even at the design stage, the empirical formula developed for merchant ships is applied without modification. An estimation error may occur due to the empirical formula derived from the regression analysis results of a model test if the empirical formula developed for merchant ships with different hull shapes is applied to fishing vessels without any modification. In this study, the modified empirical formula that can more accurately estimate the fishing vessel's maneuverability was derived by including the hull shape parameter of target fishing trawlers in the regression analysis process that derives Kijima et al. (1990) formula. As a result, the modified empirical formula showed an average estimation error of 6%, and the result improved the average error of 49% of Kijima et al. (1990) formula developed for merchant ships.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.949-959
• /
• 2006

Despite of the popularity of using empirical methods for support design, empirical rules suffer from the inherent problem of providing no indication of the safety degree of the design. For the support design of large span tunnel, it was considered that the empirical design guidelines should be augmented by more explicit design methods. This paper presents an overview of the analytical support design methodology that is used to refine initial empirical recommendations. The initial support design supplemented by analytical methods is validated by probabilistic and deterministic approach applied to stress-induced and structurally controlled gravity-driven instability problem each. As a result, the extent of the potential failure zone is sorted out and numerical parametric studies were performed to gain insight into the overall behavior of tunnel in the potential failure zone. Concequently, it was decided that additional conservation techniques have to be planed as a reserved support pattern.

• Communications for Statistical Applications and Methods
• /
• 제27권5호
• /
• pp.547-568
• /
• 2020

Modeling the statistical autocorrelations in spatial data is often achieved through the estimation of the variograms, where the selection of the appropriate valid variogram model, especially for small samples, is crucial for achieving precise spatial prediction results from kriging interpolations. To estimate such a variogram, we traditionally start by computing the empirical variogram (traditional Matheron or robust Cressie-Hawkins or kernel-based nonparametric approaches). In this article, we conduct numerical studies comparing the performance of these empirical variograms. In most situations, the nonparametric empirical variable nearest-neighbor (VNN) showed better performance than its competitors (Matheron, Cressie-Hawkins, and Nadaraya-Watson). The analysis of the spatial groundwater dataset used in this article suggests that the wave variogram model, with hole effect structure, fitted to the empirical VNN variogram is the most appropriate choice. This selected variogram is used with the ordinary kriging model to produce the predicted pollution map of the nitrate concentrations in groundwater dataset.