• Journal of Power System Engineering
• /
• v.14 no.5
• /
• pp.10-16
• /
• 2010

The main object of this study is to investigate the collection characteristics of multi-layer multi-stage porous plate system experimentally. The experiment is carried out to analyze the characteristics of pressure drop and collection efficiency for the present system with the experimental parameters such as inlet velocity, tube diameter, inlet concentration, and stage number, etc. In results, the pressure drop becomes 22 to $115mmH_2O$ with increment of stage number (1 to 5) of porous plate system at tube velocity 15 m/s and tube diameter ${\Phi}8$. In case of fly ash and 5 stage, the collection efficiency becomes 90.5 to 95.7% increasing the tube velocity 12 to 15 m/s at inlet concentration $3g/m^3$ and tube diameter ${\Phi}8$. Additionally, it is estimated that the collection efficiencies of 5 stage are 94.3, 95.6 and 99.1% for fly ash, steel dust and based power, respectively (${\Phi}8$ tube, $V_t$ = 12m/s, inlet concentration $3g/m^3$).

• Journal of ILASS-Korea
• /
• v.17 no.3
• /
• pp.134-139
• /
• 2012

The main purpose of this study is to analyze and compare the nano-particle emission characteristics by 3-different biodiesel blending rates in a CI engine. Nano-particle number density emitted from various operating conditions of compression ignition engine can be investigated by using the PPS (Pegasor Particle Sensor) system. Namely, some particle charged through the corona discharge in real-time can be measured by PPS system. Under the steady state operation of the 2.0L CRDi diesel engine with different operating condition and biodiesel blending rates, the nano-particle number density was analyzed at the downstream position of DOC system. As this research result, more engine load speed and higher the concentration of biodiesel blending rate showed that the nano-particle number density decreases. Also we found that DOC system for clean diesel engine is effectively useful instrument to reduce diesel particulate matter as resource of nano-particle generation.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.244-251
• /
• 2013

This paper presents a study the change of the load profile on the power system by the charging impact of electric vehicles (EVs) in 2020. The impact of charging EVs on the load demand is determined not only by the number of EVs in usage pattern, but also by the number of EVs being charged at once. The charging load is determined on an hourly basis using the number of the EVs based on different scenarios considering battery size, model, the use of vehicles, charging at home or work, and the method of charging, which is either fast or slow. Focusing on the impact of future load profile in Korea with EVs reaching up 10 and 20 percentage, increased power demand by EVs charging is analyzed. Also, this paper analyzes the impact of a time-of-use (TOU) tariff system on the charging of EVs in Korea. The results demonstrate how the penetration of EVs increases the load profile and decreases charging demand by TOU tariff system on the future power system.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.14 no.2
• /
• pp.75-84
• /
• 2010

Objectives: The objective of the current study is to determine whether an ultrasound device system is adequate for measuring distance from Sangwan (CV13) to pancreas. Methods: We recruited 3 healthy young male subjects and 2 sonographers. The each sonographer measured vertical shortest distance from CV13 to pancreas with a ultrasound device three times in random order. Because the total variation could be divided into repeatability, reproducibility and subject-to-subject variation in Gage R&R method, we compared the sources of variation associated with the measurement system with an analysis of variance model. Results & Conclusions: Number of distinct categories is calculated on the basis of standard deviation of subject-to-subject divided by standard deviation of total Gage R&R. If the number of categories is five or more, the measurement system may be acceptable for the analysis of the process. The number of distinct categories of the ultrasound device system for measuring distance from CV13 to pancreas was 6.29. So we concluded that repeatability and reproducibility of the ultrasound device system for measuring distance from CV13 to pancreas was acceptable.

• Journal of radiological science and technology
• /
• v.45 no.2
• /
• pp.117-125
• /
• 2022

Although stationary inverse-geometry digital tomosynthesis (s-IGDT) is able to reduce motion artifacts, image acquisition time and radiation dose, the image quality of the s-IGDT is degraded due to the truncations arisen in projections. Therefore, the effects of geometric and image acquisition conditions in the s-IGDT should be analyzed for improving the image quality and clinical applicability of the s-IGDT system. In this study, the s-IGDT images were obtained with the various X-ray source arrangement types and the various number of projections. The resolution and noise characteristics of the obtained s-IGDT images were evaluated, and the characteristics were compared with those of the conventional DT images. The s-IGDT system using linear X-ray source arrangement and 40 projections maximized the image characteristics of resolution and noise, and the corresponding system was superior to the conventional DT system in terms of image resolution. In conclusion, we expect that the s-IGDT system can be used for providing medical images in diagnosis.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.37-50
• /
• 2007

In this paper, we designed and implementation of the high speed neuron processor for real time object recognition in the making automatic system. and we designed of the PE(Processing Element) used residue number system without carry propagation for the high speed operation. Consisting of MAC(Multiplication and Accumulation) operator using residue number system and sigmoid function operator unit using MAC(Mixed Radix conversion) is designed. The designed circuits are descript by C language and VHDL(Very High Speed Integrated Circuit Hardware Description Language) and synthesized by compass tools and finally, the designed processor is fabricated in $0.8{\mu}m$ CMOS process. we designed of MAC operation unit and sigmoid proceeding unit are proved that it could run time 0.6nsec on the simulation and improved to the speed of the three times and decreased to hardware size about 50%, each order. The designed neuron processor can be implemented of the object recognition in making automatic system with desired real time processing.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1940-1954
• /
• 1992

Fine grid computations were attempted to analyze the turbulent flows in the near wall low Reynolds number region and the numerical analyses were incorporated by a finite-volume discretization with full find grid system and low Reynolds number k-.epsilon. model was employed in this region. For the improvement of low Reynolds number k-.epsilon. model, modification coefficient of eddy viscosity $f_{\mu}$ was derived as a function of turbulent Reynolds number $R_{+}$ and nondimensional length $y^{+}$ from the concept of two length scales of dissipation rate of turbulent kinetic energy. The modification coefficient $f_{\epsilon}$ in .epsilon. transport equation was also derived theoretically. In the turbulent kinetic energy equation, pressure diffusion term was added in order to consider low Reynolds number region effect. The main characteristics of this low Reynolds number k-.epsilon. model were founded as : (1) In high Reynolds number region, the present model has limiting behavior which approaches to the high Reynolds number model. (2) Present low Reynolds number k-.epsilon. model dose not need additional empirical constants for the transport equations of turbulent kinetic energy and dissipation of turbulent kinetic energy in order to consider wall effect. Present low Reynolds number turbulence model was tested in the pipe flow and obtained improved results in velocity profiles and Reynolds stress distributions compared with those from other k-.epsilon. models.s.s.

• Journal of the Korean Society for Library and Information Science
• /
• v.12
• /
• pp.7-37
• /
• 1985

In most of the modern libraries throughout the world, it is popular to adopt the author number which arranges the books or entries in alphabetical order of their author's names within the same ultimate class. However, viewed historically, that was the Western practice never used in the East before. Traditionally chronological order was followed in the East. Book number not only individualizes the books within the same class but also makes it easy for the user to choose and find out the relevant materials. In this respect, chronological book number is decidedly superior to all kinds of book number systems ever have been existed. Especially in these days of rapid obsolescence of documents and with serious problems of storage of documents, the chronological order seems to be the most modern and future-oriented of all other book number systems because it distinguishes clearly new materials from aged materials by the date of publication and controls the stack spaces mechanically and effectively. This writer devised New Chronological Book Numbers adaptable to both the Eastern and Western materials, and the system has been adopted at Yonsei University Library. The features of the system are as follows: (1) It is easy to type the call number in cataloging the Eastern and Western materials. That is because the structure of the chronological number is pure numerical notation by taking the last two figures of the year within twentieth century(e.g. 85 for AD 1985), that is 1900s, and the last three figures of the year from twenty-first century to thirtieth century, that is 2000s. (2) It does not make all classes have chronological number uniformly. Within the classes for individual biographies, genealogies and collections of biography of specific family, books about individual organization, individual literary and artistic works, philosophical works of the famous philosophers, books and its facsmile editions published before 1900, new editions, translations, commentaries, serials, chronological number is assigned to the author number as in the past. (3) It separates the Eastern materials from the Western materials and makes the typing easy in cataloging. That is because the subarrangement within the same chronological book number is made by the accession order which uses 'panjol-ponmun' or the characters of basic syllabic table of Korean alphabet in case of the Eastern materials and Roman alphabet in case of the Western materials.

• The Mathematical Education
• /
• v.50 no.2
• /
• pp.135-148
• /
• 2011

We can say that the history of mathematics is the history on the development of the number system. The number starts from Natural number and is constructed to Integer number and Rational number. The Rational number is not the complete number analytically so that Real number is completed by the idea of the nested interval method. Real number is completed analytically, however, is not by algebra, so the algebraically completed type of the rational number, through the way that similar to the process of completing real number, is Complex number. The purpose of this study is to show the most appropriate way for the development of the human being thinking about the teaching and leaning of Complex number. To do this, We have to consider the proof of the existence of Complex number, the background of the introduction of Complex number and the background knowledge that the teachers to teach Complex number should have. Also, this study analyzes the knowledge to be taught of Complex number based on the anthropological theory of didactics and finally presents the teaching method of Complex number based on this theory.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.151-157
• /
• 2013

The law for indicating the address based on the street name has taken effect in 1997. The address based on land-lot number will be changed to the address based on the street name giving odd numbers to the buildings situated on the left side and even numbers to the buildings situated on the right side per street. Searching locations by street name addresses is possible for residential areas, on the other hand, the system of finding locations is insufficient for farmlands, mountains and others, so it is unable to cope with crimes and emergency rescue. In order to make up for the weak points of street name address, the national point number, grid reference system was introduced for finding location of non-residential areas. Therefore, the purpose of this paper is to help the introduction the national point number. In this paper, we proposed a territory-oriented control point and grid range for the national point number. Numbering scheme of grid zone shall be alphanumeric, a two-letter pair Hangul and the grid coordinates in terms of Easting and Northing. We also proposed the notice area for the national point number and location of signs, application about the public and private sector.