• Journal of Korea Multimedia Society
• /
• v.12 no.9
• /
• pp.1297-1308
• /
• 2009

The life time of a wireless sensor network composed of numerous sensor nodes depend on ones of its sensor nodes. The energy efficiency operation of nodes, therefore, is one of the crucial factors to design the network. Researches based on the hierarchical network topology have been proposed and evolved in terms of energy efficiency. However, in existing researches, application layer data obtained from sensor nodes are not considered properly to compose cluster, including issue that nodes communicate with their cluster heads in TDMA scheduling. In this paper, we suggest an energy-efficient topology control scheme based on application layer data in wireless sensor networks. By using application layer data, sensor nodes form a section which is defined as the area of adjacent nodes that retain similar characteristics of application environments. These sections are further organized into clusters. We suggest an algorithm for selecting a cluster head as well as a way of scheduling to reduce the number of unnecessary transmissions from each node to its cluster head, which based on the degree and the duration of similarity between the node's data and its head's data in each cluster without seriously damaging the integrity of application data. The results show that the suggested scheme can save the energy of nodes and increase the life time of the entire network.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.165-174
• /
• 2006

In this paper, we propose a new contention window control algorithm to increase TCP performance in wireless multi-hop networks. The new contention window control algorithm is suggested to reduce the hidden and exposed terminal problems of wireless multi-hop networks. Most of packet drops in wireless multi-hop networks results from hidden and exposed terminal problems, not from collisions. However, in normal DCF algorithm a failed user increases its contention window exponentially, thus it reduces the success probability of fined nodes. This phenomenon causes burst data transmissions in a particular node that already was successful in packet transmission, because the success probability increases due to short contention window. However, other nodes that fail to transmit packet data until maximum retransmission attempts try to set up new routing path configuration in network layer, which cause TCP performance degradation and restrain seamless data transmission. To solve these problems, the proposed algorithm increases the number of back-of retransmissions to increase the success probability of MAC transmission, and fixes the contention window at a predetermined value. By using ns-2 simulation for the chain and grid topology, we show that the proposed algorithm enhances the TCP performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1098-1105
• /
• 2009

In this paper, we propose an asynchronous UWB (Ultra Wide Band) Positioning scheme that can provide precise positioning performance with low complexity and low power consumption. We also present the residual test to improve the positioning performance in multipath channels having heavy NLoS (Non-Line of Sight) components. As compared to conventional ToA (Time of Arrival) positioning scheme that requires round-trip transmissions as many as the number of beacons, the proposed UWB positioning scheme effectively decrease power consumption and processing delay since a single round-trip transmission is only required. Also, as compared to conventional TDoA (Time Difference of Arrival) positioning scheme requiring precise synchronization among the beacons, asynchronous nature of the proposed scheme achieves very low system complexity. Through simulations in LoS (Line of Sight) channel models, we observe that the proposed scheme requires low system complexity, low power consumption, while providing positioning performance of almost the same accuracy as the conventional ToA and TDoA positioning schemes. In addition, the proposed scheme by employing the residual test achieves accurate positioning performance even in multipath channels having heavy NLoS components.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.103-112
• /
• 2010

In sensor networks, because sensors are deployed in an unprotected environment, they are prone to be targets of compromise attack, If the number of compromised nodes increases considerably, the key management in the network is paralyzed. In particular, compromise of Cluster Heads (CHs) in clustered sensor networks is much more threatening than that of normalsensors. Recently, rekeying schemes which update the exposed keys using the keys unknown to the compromised nodes are emerging. However, they cause some security and efficiency problems such as single group key employment in a cluster, passive eviction of compromised nodes, and excessive communication and computation overhead. In this paper, we present a proactive rekeying scheme using renewals of duster organization for clustered sensor networks. In the proposed scheme, each sensor establishes individual keys with neighbors at network boot-up time, and these keys are employed for later transmissions between sensors and their CH. By the periodic cluster reorganization, the compromised nodes are expelled from network and the individual keys employed in a cluster are changed continuously. Besides, newly elected CHs securely agree a key with sink by informing their members to sink, without exchangingany keying materials. The simulation results shows that the proposed scheme remarkably improves the confidentiality and integrity of data in spite of the increase of compromised nodes. Also, they show that the proposed scheme exploits the precious energy resource more efficiently than SHELL.

• Journal of KIISE:Information Networking
• /
• v.29 no.2
• /
• pp.117-128
• /
• 2002

Virtual LAN (VLAN) is an architecture to enable communication between end stations as if they were on the same LAN regardless of their physical locations. VLAN defines a limited broadcast domain to reduce the bandwidth waste. The Newbridge Inc. developed a layer 3 VLAN product called VIVID, which configures a VLAN based on W subnet addresses. In a VIVID system, a single route server is deployed for address resolution, VLAN configuration, and data broadcasting to a VLAN. If the size of the network, over which the VLANS supported by the VIVID system spans, becomes larger, this single route server could become a bottleneck point of the system performance. One possible approach to cope with this problem is to deploy multiple route servers. We propose two architectures, organic and independent, to expand the original VIVID system to deploy multiple route servers. A course of simulations are done to analyze the performance of each architecture that we propose. The simulation results show that the performances of the proposed architectures depend on the lengths of VLAN broadcasting sessions and the number of broadcast data frames generated by a session. It has also been shown that there are tradeoffs between the scalability of the architecture and their efficiency in data transmissions.

• Journal of the Korea Society for Simulation
• /
• v.18 no.4
• /
• pp.165-173
• /
• 2009

Recent portable devices are so versatile that they have multiple communication channels and play several multimedia formats. Especially, many services are under development for users who connect Internet or nearby devices via WWAN (Wireless Wide Area Network) and/or WLAN (Wireless LAN). In case of paying the telecommunication cost proportional to the amount of data downloaded, it is necessary to reduce the cost by constructing a special ad hoc network in which each participating peer downloads a specific portion of the want-to-be-shared content over the payable WWAN channel and exchanges the remaining portion with other peers using the cost-free WLAN channel. If all peers participate in forwarding packets, some transmissions are redundant which results in the unnecessary consumption of bandwidth as well as the delayed content distribution time. In order to reduce the redundant transmission, this paper proposes both the excluding method which discourages some peers not to forward redundant packets, and the minimum cover set method in which only the minimum number of peers are in charge of forwarding packets. These two methods obviate redundant packet forwarding, and result in reduction of content distribution time by up to around 29%.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.475-482
• /
• 2007

Mobile nodes in ad-hoc wireless networks play roles of router as well as host. Movement of nodes causes network topology changes, which make existing routing information be modified. Therefore many routing protocols for ad-hoc networks were suggested in the literature. In this paper, we suggest an enhanced automatic route shortening method for dynamic source routing(DSR) protocol. DSR is a request/response based protocol which has low routing overhead owing to node movement. The current automatic route shortening is performed on the only nodes which belong to the source route of packets. On the contrary, our suggested method allows all neighbor nodes hearing the packet to participate in automatic route shortening. It makes all possible route shortenings be performed. So we maintain maximal shortened routes of ongoing data connections. Simulation results with ns2 show that our method pays small extra protocol overhead for ARS, but increases the ratio of successful packet transmissions and the number of ARSs performed in our mechanism is from 2 to 5 times higher than in original ARS mechanism and therefore it will improve the network-wide energy consumption in wireless ad-hoc networks.

• Journal of agricultural medicine and community health
• /
• v.49 no.3
• /
• pp.257-270
• /
• 2024

Objective: This study aimed to empirically evaluate the effectiveness of chronic disease management services utilizing ICT for patients with chronic illnesses. Methods: From May to December, 2023, 452 people who were diagnosed with hypertension and diabetes at 9 participating public health centers were provided with customized health care services for 24 weeks, and 15 performance indicators were analyzed to evaluate their effectiveness. Results: Health behavior indicators and health risk factors decreased before and after participation in the project, blood pressure control rate, hypertension and diabetes management rate, medication compliance, weight, BMI, BP, WC, FBG, and HDL-cholesterol improved(p<0.001). Service factors that influence the improvement of health behaviors included the number of activity monitor transmissions(p=0.049), confirmed concentrated consultations on physical activity(p=0.003) and nutrition(p=0.005), and the adherence to medication missions for hypertension(p=0.020). As for service factors influencing chronic disease management, the improvement in blood pressure regulation rate was due to the number of times the blood pressure monitor was linked(p=0.004), and the number of confirmed intensive consultations on physical activity(p=0.026), and nutrition(p=0.049); the improvement in hypertension control rate was due to the number of times the activity monitor and blood pressure monitor were linked(p<0.001), and the number of hypertension medication missions carried out (p=0.004); and the improvement in diabetes control rate was due to the number of times the blood pressure monitor(p=0.022) and blood sugar system were linked(p=0.017). Conclusion: Although this study has limitations as a comparative study before and after the service, it has proved that chronic disease management using ICT has a positive effect on improvement of health behavior indicator, reduction of health risk factors, hypertension, diabetes management index, weight, BMI, TG, BP, FBG improvement.