• 한국실내디자인학회논문집
• /
• 제25권5호
• /
• pp.42-54
• /
• 2016

The purpose of this study is to provide a reference for stage planning by analyzing current state of major theaters' stage space and understanding feedback from directors belonged to theaters. Each room in total 18 theaters' stage facilities was measured and their usage and requirements were analyzed on the spot. In addition, each director provided their experiential knowledge about appropriate stage composition for musical performance. The findings are as follow: under stage machinery is not needed for musical. Tour teams prefer to use their own show-deck for set conversion. On the other hand, over stage flying system needs to be able to deal with dense, fast, and accurate scene change. The size and location of the motor room needs to be carefully considered. The number of set battens is directly linked up with the size of the motor room, which should be located lower than the gridiron. As stage sets get bigger and complicated, the number of works at the gridiron is also increasing. The grating floor has to have enough strength coping with machines lifting heavy sets. Most sound control for musical performance is being done at F.O.H. these days rather that in the sound control room. It should equip enough work area and related infra especially for tour teams. 1st gallery needs to have enough effective width, power infra for lighting fixture, and strong guardrail. Lastly, the whole process of parking-unloading-transporting equipments and sets from loading dock to stage and vice versa needs to be efficient, and this has to be carefully considered from early stage of planning.

• 대한치과보철학회지
• /
• 제33권1호
• /
• pp.98-129
• /
• 1995

The purpose of this study was to evaluate how mandibular implant-supported fixed complete prosthesis, implant and mandible responded mechanically, according to curvature of arch, number and location of fixture, and amounts of load. The shape of mandibular arch was tapered or square form and, 4 or 6 fixtures were implanted in each arch model. A vertical load of 10kg was applied at the center of prosthesis and a vertical load of 20kg was applied at the location of the 10mm or 20mm cantilever posterior to the most distal implant. Three-dimensional finite element analysis was performed for stress distribution and deflection using commercial software(ABAQUS program) for Sun-SPARC Workstation. The results were as follows : 1. The case square arch form was more stable to compare with that of tapered arch form in respect of stress distribution and displacement under vertical load on the center of prosthesis. 2. 6-implants cases were more stable than 4-implants cases for decreasing bending torque under vertical load on the center of prosthesis. 3. Under vertical load on cantilever extension, the case of 10mm long cantilever was more stable than that of 20mm long cantilever in respect of stress distribution and displacement. 4. Under vertical load on cantilever extension, 6-implants cases had a tendency to reduce displacement and to increase the reaction force of supporting point due to increasing of the bending stiffness of the prosthesis than 4-implant case. 5. When the ends of 10mm or 20mm long cantilever were loaded, the most distal implant was under compressive stress but the second most distal implant was under the highest tensile stress and the remaining implants were under varying tensile stress. 6. Because 6-implants cases had smaller displacement than 4-implants cases, 6-implants cases were more favorable in respect of prevention of screw loosening under repeated loadings.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제35권5호
• /
• pp.367-371
• /
• 2009

Purpose: The purpose of this study was to evaluate the feasibility of the outfracture osteotomy sinus graft technique with the evaluation of 5-year survival rate of the implants placed in the atrophic edentulous posterior maxillary area. Materials and methods: One hundred and thirteen cases of 96 patients who visited our center from Aug 2004 to July 2009 and were diagnosed as atrophic edentulous maxillary alveolar ridge, were selected and underwent augmentation sinus surgery with outfracture osteotomy technique. Feasibility of the outfracture osteotomy technique was investigated with clinical and radiographic evaluation to assess the survival rate of the total dental implants in augmentation sinus surgery of this new kind. Total fixture number available in follow-up period was 179, in which the lost 10 patients were excluded out of 96 patients. Results: Five-year cumulative survival rate was 97.2% with 5 failures of total 179 fixtures. The average follow-up period was 29 and a half months, with the minimum and maximum follow-up periods of 4 months 21 days and 59 months 14 days, respectively. Conclusion: Traditional infracture technique is a popular method for an augmentation sinus surgery. The authors modified this classical method by outfracturing and readapting the bony window after sinus graft, with excellent treatment results evidenced by high survival rate of 97.2% (174 out of 179 fixtures), which proves the feasibility of the newly-designed outfracture osteotomy sinus graft technique.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권2호
• /
• pp.94-99
• /
• 2013

Purpose: The purpose of this study was to evaluate the feasibility of the outfracture osteotomy sinus graft technique with the evaluation of 8.5 year survival rate of the implants placed in the atrophic edentulous posterior maxillary area. Methods: One hundred and seventy-six cases of 145 patients who visited our center from August 2004 to February 2013 and were diagnosed as atrophic edentulous maxillary alveolar ridge, were selected and underwent sinus graft with outfracture osteotomy sinus graft technique. Feasibility of the outfracture osteotomy sinus graft technique was investigated with clinical and radiographic evaluation to assess the survival rate of the total dental implants in augmentation sinus surgery. Total fixture number available in follow-up period was 320, in which the lost 15 patients were excluded out of 160 patients. Results: Eight point five year cumulative survival rate was 95.6% with 14 failures of total 320 fixtures. The average follow-up period was 28 months 16 days with the minimum and maximum follow-up periods of 4 months 5 days and 94 months 10 days, respectively. Conclusion: Traditional infracture technique is a popular method for an augmentation sinus surgery. The authors modified this classical method by outfracturing and readapting the bony window after sinus graft, with excellent treatment results evidenced by high survival rate, which proves the feasibility of the newly-designed outfracture osteotomy sinus graft technique.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권7호
• /
• pp.339-343
• /
• 2006

In this study, the variations of the important characteristics of solenoid-type RF chip inductors utilizing a low-loss A1203 core material on inductor dimensions were investigated systematically. Four dimensions of the chip inductors fabricated in this work were $1.0\times0.5\times0.5mm^3,\;1.5\times1.0\times0.7mm^3,\;2.1\times1.5\times1.0mm^3,\;and\;2.4\times2.0\times1.4mm^3$ and copper (Cu) wire with $40{\mu}m$ diameter was used as the coils. High frequency characteristics of the inductance, quality factor, and impedance of developed inductors as a function of inductor dimensions were measured using an RF Impedance/Material Analyzer (HP4291B with HP16193A test fixture). It was observed that the developed inductors with the number of turns of 6 have the inductance (L) of 12 to 82 nH and exhibit the self-resonant frequency (SRE) of 3.6 to 1.2 GHz. The SRF of inductors decreases with increasing the inductor size while the L increases with the inductor size. The smallest inductors of $1.0\times0.5\times0.5mm^3$ exhibited the L of 12 nH, SRF of 3.6 GHz, and the quality factor of 67 near the frequency of 1.1 GHz. The calculated data predicted the high-frequency data of the L, and Q of the developed inductors well.

• The Journal of Advanced Prosthodontics
• /
• 제10권2호
• /
• pp.155-162
• /
• 2018

PURPOSE. The aim of this study was to compare the fracture of implant component behavior of external and internal type of implants to suggest directions for successful implant treatment. MATERIALS AND METHODS. Data were collected from the clinical records of all patients who received WARANTEC implants at Seoul National University Dental Hospital from February 2002 to January 2014 for 12 years. Total number of implants was 1,289 and an average of 3.2 implants was installed per patient. Information about abutment connection type, implant locations, platform sizes was collected with presence of implant component fractures and their managements. SPSS statistics software (version 24.0, IBM) was used for the statistical analysis. RESULTS. Overall fracture was significantly more frequent in internal type. The most frequently fractured component was abutment in internal type implants, and screw fracture occurred most frequently in external type. Analyzing by fractured components, screw fracture was the most frequent in the maxillary anterior region and the most abutment fracture occurred in the maxillary posterior region and screw fractures occurred more frequently in NP (narrow platform) and abutment fractures occurred more frequently in RP (regular platform). CONCLUSION. In external type, screw fracture occurred most frequently, especially in the maxillary anterior region, and in internal type, abutment fracture occurred frequently in the posterior region. placement of an external type implant rather than an internal type is recommended for the posterior region where abutment fractures frequently occur.

• 대한조선학회논문집
• /
• 제46권6호
• /
• pp.595-602
• /
• 2009

Great number of ships has been built by Korean Shipyards since early of 2,000 due to the expanding worldwide trade. Most of shipyards have enlarged the weight of erection block and many blocks have been assembled in block fabrication factories outside the shipyards to reduce the shipbuilding period. Especially, Giga blocks that exceed 2,000 tons are often assembled by the block fabrication factories outside the shipyard. Generally, the blocks are transported to building dock in shipyard by towing barges. Accident can be occurred during the sea transportation and it may bring about not only the delay of delivery but also a disaster on the ocean environments. Transportation condition of GPE (Grand Pre-Erection) block differs from the ocean going conditions of marine vessels. Special consideration should be included before transportation work in order to guarantee the safety of GPE blocks and barge carriers. In this paper, several examples, which have been investigated to set up the safety standard of transportation of the GPE blocks on coastal routes, are introduced. For the barge transportation on coastal sea route, the design criteria are discussed, considering the design wave, the acceleration induced by wave, structural strength, and the fixture condition of blocks.

• Imaging Science in Dentistry
• /
• 제54권2호
• /
• pp.171-180
• /
• 2024

Purpose: This study was conducted to identify the typical sites and patterns of peri-implant bone defects on cone-beam computed tomography (CBCT) images, as well as to evaluate the detectability of the identified bone defects on panoramic images. Materials and Methods: The study population included 114 patients with a total of 367 implant fixtures. CBCT images were used to assess the presence or absence of bone defects around each implant fixture at the mesial, distal, buccal, and lingual sites. Based on the number of defect sites, the presentations of the peri-implant bone defects were categorized into 3 patterns: 1 site, 2 or 3 sites, and circumferential bone defects. Two observers independently evaluated the presence or absence of bone defects on panoramic images. The bone defect detection rate on these images was evaluated using receiver operating characteristic analysis. Results: Of the 367 implants studied, 167 (45.5%) had at least 1 site with a confirmed bone defect. The most common type of defect was circumferential, affecting 107 of the 167 implants(64.1%). Implants were most frequently placed in the mandibular molar region. The prevalence of bone defects was greatest in the maxillary premolar and mandibular molar regions. The highest kappa value was associated with the mandibular premolar region. Conclusion: The typical bone defect pattern observed was a circumferential defect surrounding the implant. The detection rate was generally higher in the molar region than in the anterior region. However, the capacity to detect partial bone defects using panoramic imaging was determined to be poor.

• 한국융합학회논문지
• /
• 제10권12호
• /
• pp.257-262
• /
• 2019

최근 취미로 다양한 레포츠를 즐기는 인구가 증가하였다. 그에 따라 차량 지붕위에 다양한 물건들을 적재한 차량들을 거리에서 쉽게 볼 수가 있다. 차량 지붕위에 적재를 할 수 있게 하는 장치는 랙 이라는 장치이며 차량마다 각기 다른 형상을 가지고 있다. 다양한 종류들이 있지만 무거운 짐을 적재하기 위해 강도 및 내구성을 가져야 한다. 본 연구에서는 루프 랙의 지지대 방식과 고정대의 형상에 따른 구조 해석을 하였다. 세 가지의 모델들 중, Model C가 가장 좋은 내구성을 가지고 있음을 보였다. 따라서 어떤 형상을 가진 루프랙이 가장 안정성이 있는 것을 본 연구 결과로서 알 수 있다. 본 결과를 토대로 얻은 자동차 루프랙의 형상에 따른 구조 해석에 통한 융합 연구에 대한 설계데이터를 활용함으로서 실생활에서의 자동차 부품에 융합하여 그 미감을 보일 수 있다.

• 한국항행학회논문지
• /
• 제27권1호
• /
• pp.96-101
• /
• 2023

본 연구에서는, 회전하는 축계에서 무선센서 시스템 응용을 위해 에너지 하베스터(EH, energy harvester)를 제안되었다. 무선 센서 시스템(WSS)에 지속적으로 전원을 공급하기 위해 EH를 직경 20 cm의 샤프트에 설계 및 구현되었다. 로터에는 샤프트에 부착된 7개의 U자형 코어에 코일이 쌍으로 감겨 있다. 고정자는 8개의 I-코어에 부착된 8쌍의 자석으로 구성되며 외부 고정 장치에 고정되었다. EH의 발전 전력은 회전자와 고정자 사이의 공기 공극, 코일의 권수, 그리고 축의 회전속도에 따라 조사되었다. 제작된 EH는 300 rpm 및 3 mm 공기 공극에서 최대 2.87 W의 전력을 생산하였다.