• 방사성폐기물학회지
• /
• 제16권1호
• /
• pp.65-82
• /
• 2018

With the significant increase in spent ion-exchange resin generation, to meet the requirements of Waste Acceptance Criteria (WAC) of the Wolsong disposal facility in Korea, blending is considered as a method for enhancing disposal options for intermediate level waste from nuclear reactors. A mass balance formula approach was used to enable blending process with an appropriate mixing ratio. As a result, it is estimated around 44.3% of high activity spent resins can be blended with the overall volume of low activity spent resins at a 1:7.18 conservative blending ratio. In contrast, the reduction of high activity spent resins is considered a positive solution in reducing the amount of spent resins stored. In an economic study, the blending process has been proven to lower the disposal cost by 10% compared to current APR1400 treatment. Prior to commencing use of this blending method in Korea, coordinated discussion, and safety and health assessment should be undertaken to investigate the feasibility of fitting this blending method to national policy as a means of waste predisposal processing and management in the future.

• 방사성폐기물학회지
• /
• 제6권4호
• /
• pp.329-346
• /
• 2008

중저준위 방사성폐기물의 영구처분을 위하여 건설되는 월성원자력환경관리센터의 1단계 폐쇄후 안전성평가에 대하여 기술하였다. 처분시설의 건설운영허가를 위하여 작성된 안전성평가에 대하여 평가개요, 처분시설의 폐쇄개념, 처분부지에 대한 지하수 유동특성을 이용하여 평가를 위한 시나리오의 개발과정과 도출된 평가대상 시나리오에 대한 개념을 기술하였다. 폐쇄후 안전성평가 모델링을 위한 평가도구, 입력인자와 개별 시나리오에 대한 핵종누출 모델링, 기체발생 및 기체이동 모델링, 인간침입 모델링과 생태계 모델링에 대하여 기술하였다. 처분시설의 폐쇄후 안전성 평가시나리오에 대하여 국내 규제치를 만족하는 것으로 평가되었으며 향후 처분시설 안전성에 대한 불확실성 저감과 신뢰성 증진을 위한 노력을 지속적으로 수행할 예정이다.

• 방사성폐기물학회지
• /
• 제11권2호
• /
• pp.157-178
• /
• 2013

사용후핵연료 최종처분을 위해 심층처분은 세계적으로 가장 선호되는 방법이다. 이를 위해 선진국들은 자국 여건에 가장 잘 부합되는 고유의 처분시스템 개발에 주력하고 있거나, 일부 확보하여 상용처분사업에 적용하고 있다. 현재까지 알려진 대부분의 심층처분시스템은 공학적 및 천연방벽으로 구성된 다중방벽시스템이다. 이들 처분시스템은 수 천 년 ~ 수 십만 년 이상의 성능기간이 대하여 성능 안전성의 입증이 확인되어야 후속 상용처분사업에 적용 가능하다. 입증 현안과제들은 처분시스템의 상능 안전성 확보를 위해 수행되는 모든 행위 즉, 조사, 분석, 해석, 평가, 설계, 건설, 운영 및 폐쇄에 이르는 전 과정에 있어서 추진 과정과 결과에 대한 실현 가능성과 실증에 필요한 내용들이 해당된다. 이를 위해 대부분의 선진국들은 자국내 분포하는 대표적인 선호암종 지역에서 지하연구시설(URL)을 건설하여 실증 시연프로그램을 수행하거나 완성단계에 있다. 이 과정과 결과들은 후속되는 최종처분장 부지선정 과정에 평가기준으로 활용될 것이며, 최종처분시설의 성능 안전성평가에 필수적으로 적용하게 된다. 지하연구시설은 또한 규제-일반대중-전문가 등 다양한 이해당사자들로 하여금 심층처분의 안전성 수준에 대한 이해제고와 토론의 마당으로서 핵심적인 역할과 기능을 할 것으로 기대된다.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.1041-1048
• /
• 2021

An engineered barrier system (EBS) for the disposal of high-level radioactive waste (HLW) is composed of a disposal canister with spent fuel, a buffer material, a gap-filling material, and a backfill material. As the buffer is located in the empty space between the disposal canisters and the surrounding rock mass, it prevents the inflow of groundwater and retards the spill of radionuclides from the disposal canister. Due to the fact that the buffer gradually becomes saturated over a long time period, it is especially important to investigate its thermal-hydro-mechanical-chemical (THMC) properties considering variations of saturated condition. Therefore, this paper suggests a new method of measuring thermal conductivity and water suction for single compacted bentonite at various levels of saturation. This paper also highlights a convenient method of saturating compacted bentonite. The proposed method was verified with a previous method by comparing thermal conductivity and water suction with respect to water content. The relative error between the thermal conductivity and water suction values obtained through the proposed method and the previous method was determined as within 5% for compacted bentonite with a given water content.

• 방사성폐기물학회지
• /
• 제18권spc호
• /
• pp.21-36
• /
• 2020

With respect to spent nuclear fuels, disposal containers and bentonite buffer blocks in deep geological disposal systems are the primary engineered barrier elements that are required to isolate radioactive toxicity for a long period of time and delay the leakage of radio nuclides such that they do not affect human and natural environments. Therefore, the thermal stability of the bentonite buffer and structural integrity of the disposal container are essential factors for maintaining the safety of a deep geological disposal system. The most important requirement in the design of such a system involves ensuring that the temperature of the buffer does not exceed 100℃ because of the decay heat emitted from high-level wastes loaded in the disposal container. In addition, the disposal containers should maintain structural integrity under loads, such as hydraulic pressure, at an underground depth of 500 m and swelling pressure of the bentonite buffer. In this study, we analyzed the thermal stability and structural integrity in a deep geological disposal environment of the improved deep geological disposal systems for domestic light-water and heavy-water reactor types of spent nuclear fuels, which were considered to be subject to direct disposal. The results of the thermal stability and structural integrity assessments indicated that the improved disposal systems for each type of spent nuclear fuel satisfied the temperature limit requirement (< 100℃) of the disposal system, and the disposal containers were observed to maintain their integrity with a safety ratio of 2.0 or higher in the environment of deep disposal.

• 방사성폐기물학회지
• /
• 제12권4호
• /
• pp.287-297
• /
• 2014

사용후핵연료 또는 고준위폐기물의 안전한 처분을 위하여 지난 수십 년 동안 많은 나라들이 다양한 처분대안을 연구하여 왔다. 본 논문에서는 심지층처분기술에 있어서 사용후핵연료를 직접 처분하는 방안으로서 처분효율 향상을 위한 다양한 방안 중의 하나로 고려할 수 있는 PWR 사용후핵연료 집합체를 해체하여 연료봉을 밀집한 경우에 대한 처분 효율을 분석하였다. 이를 위하여, 우선 사용후핵연료 연료봉 밀집개념과 관련 처분용기 및 심지층처분 개념을 설정하였다. 이 개념에 근거하여 심지층 처분시스템의 공학적방벽 설계에 있어서 가장 중요한 요건인 완충재의 온도 제한요건을 만족시키는지 여부를 확인하기 위하여 각 처분개념 별로 열해석을 수행하였다. 그리고, 처분공 간격, 처분터널 간격 및 처분용기 열발산 면적에 따른 열해석 결과를 바탕으로, 단위처분면적 관점에서의 처분효율을 비교/분석하고 평가하였다. 또한, 사용후핵연료봉을 밀집시킨 경우에 있어서 냉각기간에 따른 처분개념을 분석하였다. 분석결과에 따르면 사용후핵연료봉을 밀집하여 심지층처분하는 경우 처분효율 측면에서 불리한 것으로 판단되었다. 다만, 사용후핵연료의 냉각기간을 70년 이상으로 장기화 할 경우 처분효율은 향상될 것으로 예상되지만, 사용후핵연료의 내구성 및 장기저장에 따른 조건 등 추가적인 분석이 필요하다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 춘계학술논문요약집
• /
• pp.49-50
• /
• 2017

• Nuclear Engineering and Technology
• /
• 제40권5호
• /
• pp.429-438
• /
• 2008

The objective of the present study is the depth and layout optimizations of a single layer, high level radioactive waste repository in a discontinuous rock mass with special joint set arrangements. A single layer repository model, considering variations in the repository depths, pitches, and tunnel spacings, is used to analyze the thermomechanical interaction behavior. It is assumed that the repository is constructed in saturated granite with joints; the PWR spent fuel in a disposal canister is installed in a deposition drift which is then sealed with compacted bentonite; and the backfill material is filled in the repository tunnel. The decay heat generated by the high level radioactive wastes governs the thermomechanical behavior of the near field rock mass of the repository. The temperature and displacement behavior of the repository is influenced more by the pitch variations than the tunnel spacing and repository depth. However, the stress behavior is influenced more by the repository depth variations than the pitch and tunnel spacing. For the final selection of the tunnel spacing, pitch, and repository depth, other aspects such as the nuclide migration through a groundwater flow path, construction costs, operation costs, and so on should be considered.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3235-3241
• /
• 2022

The Korea Atomic Energy Research Institute (KAERI) is planning the construction of the KIJANG Research Reactor (KJRR) for stable supply of ⁹⁹Mo. The Fission ⁹⁹Mo Production Process (FMPP) of KJRR produces solid waste such as spent uranium cake and alumina cake, and liquid waste in the form of intermediate level liquid waste (ILLW) and low level liquid waste (LLLW). This study thus established the operating range and optimum operating conditions for the cementation of ILLW from FMPP. It also evaluated whether cement waste form samples produced under optimum operational conditions satisfy the waste acceptance criteria (WAC) of a disposal facility in Korea (Korea radioactive waste agency, KORAD). Considering economic feasibility and safety, optimum operational conditions were achieved at a w/c ratio of 0.55, and the corresponding salt content was 5.71 wt%. The cement waste form samples prepared under optimum operational conditions were found to satisfy KORAD's WAC when tested for structural stability and leachability. The results indicate that the proposed cementation conditions for the disposal of ILLW from FMMP can be effectively applied to KJRR's disposal facility.

• Journal of Nuclear Fuel Cycle and Waste Technology
• /
• 제1권1호
• /
• pp.1-7
• /
• 2013

The safe management of radioactive waste is a national task required for sustainable generation of nuclear power and for energy self-reliance in Korea. Since the initial introduction of nuclear power to Korea in 1978, rapid growth in nuclear power has been achieved. This large nuclear power generation program has produced a significant amount of radioactive waste, both low- and intermediate-level waste (LILW) and spent nuclear fuel (SNF); and the amount of waste is steadily growing. For the management of LILW, the Wolsong LILW Disposal Center, which has a final waste disposal capacity of 800,000 drums, is under construction, and is expected to be completed by June 2014. Korean policy about how to manage the SNF has not yet been decided. In 2004, the Atomic Energy Commission decided that a national policy for SNF management should be established considering both technological development and public consensus. Currently, SNF is being stored at reactor sites under the responsibility of plant operator. The at-reactor SNF storage capacity will run out starting in 2024. In this paper, the fundamental principles and steps for implementation of a Korean policy for national radioactive waste management are introduced. Korean practices and prospects regarding radioactive waste management are also summarized, with a focus on strategy for policy-making on SNF management.