• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.997-1005
• /
• 2010

Recently, there has been a growing interest in the use of WLAN technology due to its easy deployment, flexibility and so on. Examples of WLAN applications range from standard internet services such as Web access to real-time services with strict latency/throughput requirements such as multimedia video and voice over IP on wireless network environments. Fair and efficient distribution of the traffic loads among APs(Access Points) has become an important issue for improved utilization of WLAN. This paper focuses on an AP selection scheme for achieving better load balance, and hence increasing network resource utilization for each user on wireless network environments. This scheme makes use of active scan patterns and the network delay as main parameters of load measurement and AP selection. This scheme attempts to estimate the AP traffic loads by observing the up/down delay and utilize the results to maximize the link resource efficiency through load balancing. We compared the proposed scheme with the original SNR(Signal to Noise Ratio)-based scheme using the NS-2(Network Simulation.2). We found that the proposed scheme improves the throughput by 12.5% and lower the network up/down link delay by 36.84% and 60.42%, respectively. All in all, the new scheme can significantly increase overall network throughput and reduce up/down delay while providing excellent quality for voice and video services.

• Journal of Korean Society on Water Environment
• /
• v.26 no.5
• /
• pp.802-809
• /
• 2010

An automatic calibration tool of Hydrological Simulation Program-Fortran (HSPF), Parameter Estimation (PEST) program, was applied at the Imha lake watershed to get optimal hydrological parameters of HSPF. Calibration of HSPF parameters was performed during 2004 ~ 2008 by PEST and validation was carried out to examine the model's ability by using another data set of 1999 ~ 2003. The calibrated HSPF parameters had tendencies to minimize water loss to soil layer by infiltration and deep percolation and to atmosphere by evapotranspiration and maximize runoff rate. The results of calibration indicated that the PEST program could calibrate the hydrological parameters of HSPF with showing 0.83 and 0.97 Nash-Sutcliffe coefficient (NS) for daily and monthly stream flow and -3% of relative error for yearly stream flow. The validation results also represented high model efficiency with showing 0.88 and 0.95, -10% relative error for daily, monthly, and yearly stream flow. These statistical values of daily, monthly, and yearly stream flow for calibration and validation show a 'very good' agreement between observed and simulated values. Overall, the PEST program was useful for automatic calibration of HSPF, and reduced numerous time and effort for model calibration, and improved model setup.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.337-352
• /
• 2005

In this paper, a fuzzy logic implementation of the random early detection (RED) mechanism [1] is presented. The main objective of the proposed fuzzy controller is to reduce the loss probability of the RED mechanism without any change in channel utilization. Based on previous studies, it is clear that the performance of RED algorithm is extremely related to the traffic load as well as to its parameters setting. Using fuzzy logic capabilities, we try to dynamically tune the loss probability of the RED gateway. To achieve this goal, a two-input-single-output fuzzy controller is used. To achieve a low packet loss probability, the proposed fuzzy controller is responsible to control the $max_{p}$ parameter of the RED gateway. The inputs of the proposed fuzzy controller are 1) the difference between average queue size and a target point, and 2) the difference between the estimated value of incoming data rate and the target link capacity. To evaluate the performance of the proposed fuzzy mechanism, several trials with file transfer protocol (FTP) and burst traffic were performed. In this study, the ns-2 simulator [2] has been used to generate the experimental data. All simulation results indicate that the proposed fuzzy mechanism out performs remarkably both the traditional RED and Adaptive RED (ARED) mechanisms [3]-[5].

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.4
• /
• pp.163-170
• /
• 2014

A pseudolite is used as a GPS backup system, and is also used for the purpose of indoor navigation and correction information transmission. It is installed on the ground, and transmits signals that are similar to those of a GPS satellite. In addition, in recent years, studies on the improvement of positioning accuracy using the pseudorange measurement of a pseudolite have been performed. As for the effect of the time synchronization error between a pseudolite and a GPS satellite, a time synchronization error of 1 us generally induces a pseudorange error of 300 m; and to achieve meter-level positioning, ns-level time synchronization between a pseudolite and a GPS satellite is required. Therefore, for the operation of a pseudolite, a time synchronization algorithm between a GPS satellite and a pseudolite is essential. In this study, for the time synchronization of a pseudolite, "a pseudolite time synchronization method using the time source of UTC (KRIS)" and "a time synchronization method using a GPS timing receiver" were introduced; and the time synchronization performance depending on the pseudolite time source and reference time source was evaluated by designing a software-based pseudolite time synchronization performance evaluation simulation platform.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.44-53
• /
• 2006

In this paper, we propose a new Active Channel Scanning scheme by scanning active channels employed by neighbor APs' with the handover counts and non overlap channel information for fast handover. Under the proposed scheme, the mobile which has finished handover to connect a new APsends the neighbor AP's channel information learned by itself during handover to the new AP. And then, the new AP relays the neighbor channel information to the old AP. It decides a priority by handover counts and non overlap channel information for building a Neighbor Channel Table(NCT), and also sends the table information to its associated mobile nodes, periodically. As a result each mobile can scan only active neighbor APs' channels when performs handover based on the referring to NCT information. Using NS-2 Simulator, we applied to supposed ACS that the result of simulation decides to sort by handover counts and non overlap channel information. we evaluate our proposed ACS scheme based on NCT along with the full scanning scheme and the selective scanning scheme. From simulation results, we show that the proposed scheme is advantageous over the other two schemes in terms of the number of scanning channels and the scanning latency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.3
• /
• pp.258-267
• /
• 2013

Recently, Proxy Mobile IPv6(PMIPv6) networks have been drawing attention as the mobility management protocol that uses limited wireless resources effectively. And the multicast, which is a core technology of the Internet broadcast system such as mobile IPTV, has been widely discussed mainly based on PMIPv6 network. However, PMIPv6-based multicast cannot support the global mobility directly between different PMIPv6 domains because PMIPv6 is basically designed for local mobility in single PMIPv6 domain. Moreover, PMIPv6-based multicast causes the disconnection of services because it does not solve the packet loss problem during binding and group joining procedure. In this paper, we propose a global mobility scheme that supports the seamless multicast service in PMIPv6 networks. The proposed scheme supports the global mobility due to the addition of extra signalling messages between LMAs. Also, it achieves low latency because it performs fast binding and group joining procedure. We present the simulation results which show that the proposed scheme achieves the global mobility with low latency through the NS-2 simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.126-129
• /
• 2015

Device-to-device (D2D) communications, a subset of Proximity-based Services that enables direct communication between LTE network subscribers, is gaining popularity. It is well underway to be adopted in cellular communication systems for pedestrian and connected-vehicles alike. In this paper, we briefly present our model of an Evolved Packet Core Network-assisted device discovery simulator and show the applicability of Proximity-based Services for Vehicular Ad-hoc Networks. Through the performance evaluation based on the developed simulation environment, it is shown that in case when users gather in the same vicinity, as in public transportation, LTE network data can be efficiently offloaded and multicasted through Wi-Fi for e.g. delivering traffic-related information and for the benefit of infotainment service consumers.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.1
• /
• pp.308-324
• /
• 2018

HTTP adaptive streaming (HAS) is a promising technology for delivering video content over the Internet. HAS-based video streaming solutions rely on bandwidth estimation to select the appropriate video bitrate. Video streaming solutions that consider network conditions provide users with seamless video playback. However, when multiple clients compete for a common bottleneck link, conventional bandwidth estimation schemes that consider only one client overestimate the network bandwidth due to the ON-OFF traffic pattern. The bandwidth overestimation can cause Quality of Experience (QoE) degradation, such as unnecessary changes in video quality, and unfairness of video quality. In this paper, we propose a client-side bandwidth estimation scheme to obtain a better QoE of HAS in the multiple-client environment. The proposed scheme differentiates the client buffer status according to the buffer occupancy, and then estimates the available network bandwidth based on the buffer status and segment throughput. We evaluate the performance of HAS implemented in the ns-3 network simulator. Simulation results show that compared with the conventional schemes, the proposed scheme can enhance the QoE.

• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.629-639
• /
• 2012

A challenge faced by smart grid systems is providing highly reliable transmissions to better serve different types of electrical applications and improve the energy efficiency of the system. Although wireless networking technologies can provide high-speed and cost-effective solutions, their performance may be impaired by various factors that affect the reliability of smart grid networks. Here, we first suggest the use of IEEE 802.11s-based wireless LAN mesh networks as high-speed wireless backbone networks for smart grid infrastructure to provide high scalability and flexibility while ensuring low installation and management costs. Thereafter, we analyze some vital problems of the IEEE 802.11s default routing protocol (named hybrid wireless mesh protocol; HWMP) from the perspective of transfer reliability, and propose appropriate solutions with a new routing method called HWMP-reliability enhancement to improve the routing reliability of 802.11s-based smart grid mesh networking. A simulation study using ns-3 was conducted to demonstrate the superiority of the proposed schemes.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.149-150
• /
• 2006

In this paper, design, simulation, fabrication method, and measured results of a digital frequency discriminator(DFD) operating in E, F, and G band are introduced. We describe the direct conversion scheme(DCS) with microwave integrated-circuit(MIC) developed for the small-area and high-speed system. When the input signal is the pulse with a pulse width of 100 ns, accuracy of frequencies measured by the DFD has 1.335 MHz RMS at no noise and 2.64 MHz RMS at signal-to-noise(S/N) ratio within 3 dB in E, F, and G band, which nearly satisfy the specification of 2.5 MHz RMS.