• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.761-767
• /
• 2006

To determine freshness and quality change of chicken products during storage, we manufactured freshness indicator and monitored the surface pH, volatile basic nitrogen (VBN), thiobarbituric acid reacted substance (TBARS), total bacterial counts, electronic nose analysis, and sensory evaluation. All chicken products (drum, wing, thigh) had a change in color of freshness indicator after storage of 3 days at $4^{\circ}C$, indicating poor quality at the time. VBN, TBARS values, and total bacterial counts reached the decay point at the time of color change of freshness indicator attached to the surface of chicken samples. The sensory evaluation also indicated sample was not acceptable by off-odor at day 4 of storage. According to electronic nose analysis to examine off-odor, there were significant differences in terms of principal component analysis values among chicken samples of day 0, day 3, and day 5 of storage. These results suggest that freshness indicator should be useful in determining expiration date of chicken products during marketing by indicating the microbial safety as well as physicochemical and sensory change.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.2
• /
• pp.133-138
• /
• 2001

This paper describes a system that can used to recognize an unknown material regardless of the change of ambient tem-perature using temperature response curve fitting and fuzzy neural network(FNN). There are some problems to realize the recogni-tion system using temperature response. It requires too many memories to store the vast temperature response data and it has to be filtered to remove noise which occurs in experiment. And the temperature response is influenced by the change of ambient tempera-ture. So, this paper proposes a practical method using curve fitting the remove above problems of memories and nose. And FNN is propose to overcome the problem caused by the change of ambient temperature. Using the FNN which is learned by temperature responses on fixed ambient temperature and known thermal conductivity, the thermal conductivity of the material can be inferred on various ambient temperature. So the material can be recognized by the thermal conductivity.

• Korean Journal of Food Science and Technology
• /
• v.38 no.3
• /
• pp.325-330
• /
• 2006

To determine freshness and detect changes in quality of beef and pork during storage, we manufactured a freshness indicator and monitored the surface pH, volatile basic nitrogen (VBN), thiobarbituric acid reacted substance (TBARS), total bacterial counts, electronic nose analysis, and sensory evaluation. Both beef loin and pork belly had a change in the color of the freshness indicator after storage of 6 days at $2^{\circ}C$. VBN and TBARS levels and total bacterial counts reached the decay point at the time of the color change of the freshness indicator attached to the surface of the beef and pork samples. Sensory evaluation also indicated that the samples were unacceptable by an 'off' odor on day 6 of storage. There were significant differences in electronic nose analysis for samples from day 0, day 6, and day 10 of storage. These results suggest that this freshness indicator should be useful in determining the expiration date of beef and pork products during marketing by indicating the microbial safety as well as the physicochemical and sensory changes.

• Journal of the Korean Society for Railway
• /
• v.19 no.6
• /
• pp.709-716
• /
• 2016

To reduce the aerodynamic drag of high speed trains, aerodynamic drag of KTX-Sancheon was analyzed in detail according to individual components. Aerodynamic drag values of the power cars (front car, rear car) and bogies are about 42.9% and 10.1% of the total aerodynamic drag, respectively. For the aerodynamic drag reduction of a power-car, a nose shape optimization was conducted using the Broyden-Fletcher-Goldfarb-Shanno optimum method. Shape change of a power car and bogie fairing adaptation are used to reduce the aerodynamic drag of a car body. The aerodynamic drag of the optimized train-set dropped by 15.0% compared to the aerodynamic drag of the KTX-Sancheon; a running resistance reduction of 12% is expected at the speed of 350km/h.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.671-675
• /
• 2010

Purpose: In order to maintain corrected nasal tip projection, strong support is important. Authors used calvarial bone graft method for this purpose. Patients were followed up about permanency of the bone graft for a long time. Methods: From 1995 to 1998, author performed calvarial bone graft on 30 adult patients with secondary cleft lip and nose deformity. Patients were observed for 34 months. There were no specific complications, and results were satisfactory. We could confirm the permanence of the calvarial bone graft in 3 patients by photography and radiologic studies for 10 years follow-up. Results: None of the patients showed size change or displacement. But the portion of graft facing the tip was absorbed resulting in loss of tip projection and short nose in two patients. One patient had fracture on the middle of the graft. This caused depression from lower portion of the dorsum to the tip. Conclusion: Despite of autogenous grafts such as calvarial bone, absorption of the bone may occur when compressed with tension for a long period. And the graft in the nasal tip not having any contact with the nasal bone may cause absorption of the graft.

• Journal of the Korean Society for Heat Treatment
• /
• v.6 no.1
• /
• pp.1-8
• /
• 1993

In this paper, the surface roughness influenced by Sm45C hardness in high frequency induction hardening and mechanical characteristics for the changed Hv 598 part and the unchanged hardness Hv 223 part by use of cermet and ceramic cutting tools was experimentally examined. Finally, we could be had some important results by processing surface roughness on cutting conditions such as cutting speed, feed rate, depth of cut and changes of tool nose radius. The results are summarized as follows. 1. In case of the same cutting condition, the hardness of workpiece was high and acquired the best processing surface roughness when the radius of the tool nose had 0.8 mm and feed rate was 0.04 mm/rev. 2. In case of the hardness of workpiece, though the cutting speed didn't have an effect on processing surface roughness, the less feed rate and the more processing surface roughness improved. On the other hand, the low inside the hardness of workpiece, the more cutting speed and the more feed rate increase, the processing surface of roughness improved. 3. Regardless of the hardness of workpiece, the change of the cutting depth didn't have great effect on the surface roughness. 4. On cutting the high surface hardness part with cutting tools of cermet and ceramic, it can be acquired the higher processing surface roughness because it hadn't been taken effect on cutting speed, In case of the cutting process of the low inside hardness part the two cutting tools have acquired the similar processing surface roughness.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.367-375
• /
• 2017

RANS computational analysis was performed on the head of the launch vehicle including the hammerhead nose pairing in the supersonic regime. The two-dimensional axisymmetric analysis was performed by using laminar, fully turbulent and transition models and compared with the experimental data. It was observed that different flow phenomena occurred depending on the Reynolds number. Under the high Reynolds number condition, the boundary layer becomes turbulent, which is not separated from the surface of the launch vehicle. With the low Reynolds number condition, laminar separation bubble was produced due to the separation and reattachment of the boundary layer on the expansion-compression edge of the hammerhead type nose fairing. The three-dimensional computations with the angle of attack showed a fully detached vortical structure due to the laminar separation bubble. It is proved that the turbulent transition should be considered to predict the separation bubble with the Reynolds number.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.6
• /
• pp.385-392
• /
• 2020

Objectives: This study evaluates soft tissue changes of the upper lip and nose after maxillary setback with orthognathic surgery such as Le Fort I or anterior segmental osteotomy. Materials and Methods: All 50 patients with bimaxillary protrusion and skeletal Class II malocclusion underwent Le Fort I or anterior segmental osteotomy with backward movement. Soft and hard tissue changes were analyzed using cephalograms collected preoperatively and 6 months postoperatively. Results: Cluster analysis on the ratios shows that 2 lines intersected at 4 mm point. Based on this point, we divided the subjects into 2 groups: Group A (less than 4 mm, 27 subjects) and Group B (more than 4 mm, 23 subjects). Also, each group was divided according to changes of upper incisor angle (≥4°=A1, B1 or <4°=A2, B2). The correlation between A and B groups for A'/ANS and Ls/Is (P<0.001) was significant; A'/A (P=0.002), PRN/A (P=0.043), PRN/ANS (P=0.032), and St/Is (P=0.010). Variation of nasolabial angle between the two groups was not significant. There was no significant correlation of vertical movement and angle variation. Conclusion: The ratio of soft tissue to hard tissue movement depends on the amount of posterior movement in the maxilla, showing approximately two times higher rates in most of the midface when posterior movement was greater than 4 mm. The soft tissue changes caused by posterior movement of the maxilla were little affected by angular changes of upper incisors. Interestingly, nasolabial angle showed a different tendency between A and B groups and was more affected by incisal angular changes when horizontal posterior movement was less than 4 mm.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.325-340
• /
• 1996

Along with traditional goal of 'straightening teeth', today's orthodontics put more and more emphasis on facial esthetics. Naturally, the importance of soft tissue, which dictates one's facial form, is noticed. There have been many cephalometric studies on growth of hard tissue ; however, only a few on that of soft tissue. In Korea, various methods of sampling, measuring and analysing were used to study soft tissue changes, and yet, soft tissue changes along with process of normal growth have not been studied. The author carried out this study as a part of semi-longitudinal study on craniofacial growth and development of Korean children from ages of six to seventeen. 409 boys and 436 girls who'd had no systemic disease for the last three years and shown normal developmental and occlusal status were chosen as subjects. Cephalometric X-rays were taken of each subject, and facial form, lip position & form, nose form, and lip thickness were measured. Mean values and standard deviations were calculated according to age and gender, and figures and tables were drawn accordingly. The following results were obtained: 1. In respect to facial form, boys showed growth for longer period compared to girls. Also, lower face showed higher growth rate than upper face. 2. There was not much change in thickness of upper and lower lips with age; however, they appeared more prominent compared to caucasian children. 3. Nose grew horizontally with age. 4. Horizontal thickness of lower face increased with age, and upper lip thickness at nose base[A-Sn(FH)] showed more growth than anywhere else.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.3
• /
• pp.284-287
• /
• 1999

The nose, a striking features of the human face, is regarded by many clinicians as the keystone of facial esthetics. Clinically, as the treatment of a dentofacial deformity, the soft tissue changes that occurred normally with movement of the skeletal bases. Changes of the soft tissue in the maxillary orthognathic surgery are widening of alar base, elevated nasal tip and flattening of upper lip. In addition, soft tissue change is difficult to predict, it has considerable variability in the response of soft tissue. We reviewed patients who received Le Fort I advancement osteotomy in our department and analysed preoperative and postoperative alar base width, nasal height in clinical measurement and cephalometry and patient's satisfaction of postoperative nasal appearance.