• Structural Engineering and Mechanics
• /
• v.9 no.3
• /
• pp.257-268
• /
• 2000

The seismic design recommendations of the Jordan Code for Loads and Forces (JC) are evaluated, based on comparisons with analytical studies and the Uniform Building Code. It was established that the overall safety ensured by the implementation of these recommendations is not consistent with the established seismic risk in Jordan and the intended objectives of the code. A new zoning map is proposed with effective peak ground acceleration values. The different period formulae of the code were studied and were found to grossly underestimate the fundamental period when compared with analytically derived values or other codes' formulae. Other factors including the dynamic, soil, importance and behavior factors are discussed. It was determined that the JC's lateral load distribution formulae clearly lead to smaller internal forces than both dynamic analysis and UBC loads, even when those loads are normalized to give the same base shear. The main reason for this is attributed to the limited allowance for a backlash force in the JC.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.352-355
• /
• 1986

In this paper, some candidates suggested for the improvement of the robustness in adaptive control systems are shortly surveyed. Using dead zone concept of error in adaptation process, gain retardation methods such as .sigma.-modification and parameter restriction method are those considered. Feedforward compensation and normalized adaptation technique are also considered. New modeling technique suggested by Donati et al is used for the indirect control of plants containing unmodeled dynamics. The frequency band of input signal, which is used as a test signal and control signal simultaneously, is directly related to the control of plants containing high frequency parastics. Computer simulation results of the some selected algorithms are shown.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.11
• /
• pp.13-20
• /
• 2005

For Modern Consumer and Communication Elecronic Devices, Always Error Protecting HW and SW is used. The Core is RS(Reed Solomon) Codec in Galois Field GF($2^8$). Here New 2 to 3 Symbol RS Decoder Design and Encoder design Method using Normalized error position Value is described. Examples are given to show the methods are working well.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.11
• /
• pp.612-616
• /
• 2013

A circular CAV damper has been developed, based on the investigation of the pressure loss, and the flow-resisting moment by the damper blade. When a torsional spring is attached to the damper axle, and the setting angle is adjusted to around $82^{\circ}$, the volume rate across the damper is almost independent of the static pressure. Such a CAV characteristic appears at an opening angle between $40^{\circ}$ and $60^{\circ}$, where the normalized moment decreases linearly with the angle. In addition, by adjusting the setting angle, the volume rate can be controlled to within 10% error, regardless of the pressure loss.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.37.3-37.3
• /
• 2017

We present a novel GPU accelerated search algorithm for broadband extended gravitational-wave emission (BEGE) with better than real-time analyis of H1-L1 LIGO S6 data. It performs matched filtering with over 8 million one-second duration chirps. Parseval's Theorem is used to predict the standard deviation ${\sigma}$ of filter output, taking advantage of near-Gaussian LIGO (H1,L1)-data in the high frequency range of 350-2000 Hz. A multiple of ${\sigma}$ serves as a threshold to filter output back to the central processing unit. This algorithm attains 80% efficiency, normalized to the Fast Fourier Transform (FFT). We apply it to a blind, all-sky search for BEGE in LIGO data, such as may be produced by long gamma-ray bursts and superluminous supernovae. We report on mysterious features, that are excluded by exact simultaneous occurrance. Our results are consistent with no events within a radius of about 20 Mpc.

• Journal of Environmental Science International
• /
• v.4 no.5
• /
• pp.1-1
• /
• 1995

An attempt was made to study the subdivision of Korea by the annual amount and the annual change pattern of monthly precipitation days(that is one of the important elements of the precipitation characteristics), using the mean values for the years 1961-1990 at the 68 stations. The amplitudes of annual change were normalized and using these values, the principal component analysis was applied to determine the annual change patterns. The results show that they are expressed by the combinations of the three change patterns in almost whole regions of Korea. As a result,the annual change pattern of precipitation days in Korea is classified into 8 types from A to e,in detail, 36 types from A0 to e$\circled2$.And regional division of precipitation days in Korea is divided into 13 regions from I a to IIIC,into detail, 41 regions from I no to IIICl.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.4
• /
• pp.468-475
• /
• 2008

This paper presents a method for estimating the transient stability status of the power system using radial basis function(RBF) neural network with a fast hybrid training approach. A normalized transient energy margin(${\Delta}V_n$) has been obtained by the potential energy boundary surface(PEBS) method along with a time-domain simulation technique, and is used as an output of the RBF neural network. The RBF neural network is then trained to map the operating conditions of the power system to the ${\Delta}V_n$, which provides a measure of the transient stability of the power system. The proposed approach has been successfully applied to the 10-machine 39-bus New England test system, and the results are given.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1710-1718
• /
• 1993

This paper investigates the problem of a crack approaching two circular holes in an orthotropic infinite plate. The stress intensity factors were obtained by using the modified mapping-collocation method. The present results show excellent agreement with existing solutions for a crack approaching two circular holes in an isotropic infinite plate. In the numerical examples, various types of cross-ply laminated composites were considered. To investigate the effect of orthotropy and geometry(d/R and a/(d-R)) on crack tip singularity, stress intensity factors were considered as functions of the normalized crack length. It is expected that the modified mapping-collocation method can be applied to the analysis of various kinds of cracks existing around the stress-concentration region of composite laminate.

• Bulletin of the Korean Mathematical Society
• /
• v.33 no.1
• /
• pp.1-16
• /
• 1996

Earlier in 1935[12], M. S. Robertson introduced the class of quadrant preserving functions. More precisely, let Q be the class of all functions f(z) analytic in the unit disk $D = {z : $\mid$z$\mid$ < 1}$ such that f(0) = 0, f'(0) = 1, and the range f(z) is in the j-th quadrant whenever z is in the j-th quadrant of D, j = 1,2,3,4. This class Q contains the subclass of normalized, odd univalent functions which have real coefficients. On the other hand, this class Q is contained in the class T of odd typically real functions which was introduced by W. Rogosinski [13]. Clearly, if $f \in Q$, then f(z) is real when z is real and therefore the coefficients of f are all real. Recently, it was observed by Y. Abu-Muhanna and T. H. MacGregor [1] that any function $f \in Q$ is odd. Instead of functions "preserving quadrants", the authors [1] have introduced the notion of "preserving sectors".

• Journal of the Korean Mathematical Society
• /
• v.57 no.2
• /
• pp.331-357
• /
• 2020

Let p be an analytic function defined on the open unit disk 𝔻. We obtain certain differential subordination implications such as ψ(p) := p^λ(z)(α+βp(z)+γ/p(z)+δzp'(z)/p^j(z)) ≺ h(z) (j = 1, 2) implies p ≺ q, where h is given by ψ(q) and q belongs to 𝒫, by finding the conditions on α, β, γ, δ and λ. Further as an application of our derived results, we obtain sufficient conditions for normalized analytic function f to belong to various subclasses of starlike functions, or to satisfy |log(zf'(z)/f(z))| < 1, |(zf'(z)/f(z))² - 1| < 1 and zf'(z)/f(z) lying in the parabolic region v² < 2u - 1.