• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.237-246
• /
• 2020

Recently, as high resolution satellites data have been serviced, frequent DSM (Digital Surface Model) generation over urban areas has been possible. In addition, it is possible to detect changes using a high-resolution DSM at building level such that various methods of building change detection using DSM have been studied. In order to detect building changes using DSM, we need to generate a DSM using a stereo satellite image. The change detection method using D-DSM (Differential DSM) uses the elevation difference between two DSMs of different dates. The D-DSM method has difficulty in applying a precise vertical threshold, because between the two DSMs may have elevation errors. In this study, we focus on the urban structure change detection using D-nDSM (Differential nDSM) based on nDSM (Normalized DSM) that expresses only the height of the structures or buildings without terrain elevation. In addition, we attempted to reduce noise using a morphological filtering. Also, in order to improve the roadside buildings extraction precision, we exploited the urban road network extraction from nDSM. Experiments were conducted for high-resolution stereo satellite images of two periods. The experimental results were compared for D-DSM, D-nDSM, and D-nDSM with road extraction methods. The D-DSM method showed the accuracy of about 30% to 55% depending on the vertical threshold and the D-nDSM approaches achieved 59% and 77.9% without and with the morphological filtering, respectively. Finally, the D-nDSM with the road extraction method showed 87.2% of change detection accuracy.

• The Korean Journal of Physiology and Pharmacology
• /
• v.8 no.6
• /
• pp.335-338
• /
• 2004

There are numerous studies on transepithelial transports in duct cells including $Cl^-$ and/or $HCO_3^-$. However, studies on transepithelial $K^+$ transport of normal duct cells in exocrine glands are scarce. In the present study, we examined the characteristics of $K^+$ currents in single duct cells isolated from guinea pig pancreas, using a whole-cell patch clamp technique. Both $Cl^-$ and $K^+$ conductance were found with KCI rich pipette solutions. When the bath solution was changed to low $Cl^-$, reversal potentials shifted to the negative side, $-75{\pm}4\;mV$, suggesting that this current is dominantly selective to $K^+$. We then characterized this outward rectifying $K^+$ current and examined its $Ca^{2+}$ dependency. The $K^+$ currents were activated by intracellular $Ca^{2+}$. 100 nM or 500 nM $Ca^{2+}$ in pipette significantly (P<0.05) increased outward currents (currents were normalized, $76.8{\pm}7.9\;pA$, n=4 or $107.9{\pm}35.5\;pA$, n=6) at +100 mV membrane potential, compared to those with 0 nM $Ca^{2+}$ in pipette $(27.8{\pm}3.7\;pA,\;n=6)$. We next examined whether this $K^+$ current, recorded with 100 nM $Ca^{2+}$ in pipette, was inhibited by various inhibitors, including $Ba^{2+}$, TEA and iberiotoxin. The currents were inhibited by $40.4{\pm}%$ (n=3), $87.0{\pm}%$ (n=5) and $82.5{\pm}%$ (n=9) by 1 mM $Ba^{2+}$, 5 mM TEA and 100 nM iberiotoxin, respectively. Particularly, an almost complete inhibition of the current by 100 nM iberiotoxin further confirmed that this current was activated by intracellular $Ca^{2+}$. The $K^+$ current may play a role in secretory process, slnce recycling of $K^+$ is critical for the initiation and sustaining of $CI^-$ or $HCO_3^-$ secretion in these cells.

• The Korean Journal of Physiology and Pharmacology
• /
• v.14 no.1
• /
• pp.37-43
• /
• 2010

The serine/threonine kinase Akt has been shown to play a role of multiple cellular signaling pathways and act as a transducer of many functions initiated by growth factor receptors that activate phosphatidylinositol 3-kinase (PI3K). It has been reported that phosphorylated Akt activates eNDS resulting in the production of NO and that NO stimulates soluble guanylate cyclase (sGC), which results in accumulation of cGMP and subsequent activation of the protein kinase G (PKG). It has been also reported that PKG activates PI3K/Akt signaling. Therefore, it is possible that PI3K, Akt, eNOS, sGC, and PKG form a loop to exert enhanced and sustained activation of Akt. However, the existence of this loop in eNOS-expressing cells, such as endothelial cells or astrocytes, has not been reported. Thus, we examined a possibility that Akt phosphorylation might be enhanced via eNOS/sGC/PKG/PI3K pathway in astrocytes in vivo and in vitro. Phosphorylation of Akt was detected in astrocytes after KA treatment and was maintained up to 72 h in mouse hippocampus. 2 weeks after KA treatment, astrocytic Akt phosphorylation was normalized to control. The inhibition of eNOS, sGC, and PKG significantly decreased Akt and eNDS phosphorylation induced by KA in astrocytes. In contrast, the decreased phosphorylation of Akt and eNDS by eNDS inhibition was significantly reversed with PKG activation. The above findings in mouse hippocampus were also observed in primary astrocytes. These data suggest that Akt/eNOS/sGC/PKG/PI3K pathway may constitute a loop, resulting in enhanced and sustained Akt activation in astrocytes.

• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.549-556
• /
• 2005

Effects of the dimensionless variables on the heat transport phenomena in the extrusion process of a single screw extruder have been studied numerically. Based on the understanding of the solids conveying related to the geometrical structure and characteristics of the screw, the heat balance equation for the solids conveying zone was established and normalized. The finite volume method and power-law scheme were applied to derive a discretized equation and the equation was solved using the alternating direction iterative method with relaxation. Effects of the dimensionless parameters, Biot and Peclet numbers, that define the heat transfer characteristics of the solids conveying zone have been investigated with respect to the temperature of the feeding zone and the length of the solids conveying zone. As the Biot number is increased, the heat loss by cooling dominates to decrease the temperature of the barrel but it has little effects on the temperature of the solids bed and the length of the solids conveying zone. On the other hand, if the Peclet number is increased, the convection term dominates to decrease the temperature of the solids bed and it results in an increase in the length of the solids conveying zone.

• The Journal of Korean Physical Therapy
• /
• v.20 no.3
• /
• pp.29-34
• /
• 2008

Purpose: The purpose of this study was to identify the effect of anterolateral (45$^{\circ}$) and lateral (90$^{\circ}$) direction resistance, with using an elastic band, on the electromyographic(EMG) activity ratio of the vastus medialis oblique (VMO) and the vastus lateralis (VL) during squat exercise. Methods: The study subjects were 19 active people with no history of patellofemoral pain, limitation of range of motion or pain when performing squat exercise. A 'repeated measures within subjects' design was used. The subjects were asked to perform three repetitions of a 90$^{\circ}$ knee flexion squat exercise with anterolateral (45$^{\circ}$) and lateral (90$^{\circ}$) resistance and without resistance, respectively. The EMG activity of the VMO and VL were recorded by surface EMG electrodes and the results were normalized by the % MVIC value. Results: Repeated measures ANOVA's revealed that squat exercise with anterolateral (45$^{\circ}$) resistance produced significantly greater VMO/VL EMG activity ratio than that with lateral (90$^{\circ}$) resistance and without resistance (p=.013). Yet the result of contrast testing revealed that squat exercise with lateral (90$^{\circ}$) resistance showed no significant difference of the VMO/VL EMG activity ratio, as compared with squat exercise without resistance (p>0.05). Conclusion: The findings of this study suggest that squat exercise combining anterolateral (45$^{\circ}$) resistance can contribute positively to the patients with patellofemoral pain as they increase the VMO/VL EMG activity ratio.

• Journal of Advanced Navigation Technology
• /
• v.10 no.2
• /
• pp.152-158
• /
• 2006

In this paper, electromagnetic scattering problems by a resistive strip grating with zero resistivity at the strip-edges on a grounded 2 dielectric layers according as strip width and spacing, relative permittivity, thickness of dielectric layers, and incident angles of a electric wave are analyzed by applying the FGMM(Fourier-Galerkin Moment Method) known as a numerical procedure. The scattered electromagnetic fields are expanded in a series of floguet mode functions. The boundary conditions are applied to obtain the unknown field coefficients and the resistive boundary condition is used for the relationship between the tangential electric field and the electric current density on the strip. The tapered resistivity of resistive strips varies zero resistivity at strip edges. Then the induced surface current density on the resistive strip is expanded in a series of Chebyshev polynomials of the second kind. The normalized reflected power with zero resistivity in this paper show in good agreement with those of existing paper.

• Journal of Computational Design and Engineering
• /
• v.1 no.3
• /
• pp.187-193
• /
• 2014

One of the hottest challenges in automotive industry is related to weight reduction in sheet metal forming processes, in order to produce a high quality metal part with minimal material cost. Stamping is the most widely used sheet metal forming process; but its implementation comes with several fabrication flaws such as springback and failure. A global and simple approach to circumvent these unwanted process drawbacks consists in optimizing the initial blank shape with innovative methods. The aim of this paper is to introduce an efficient methodology to deal with complex, computationally expensive multicriteria optimization problems. Our approach is based on the combination of methods to capture the Pareto Front, approximate criteria (to save computational costs) and global optimizers. To illustrate the efficiency, we consider the stamping of an industrial workpiece as test-case. Our approach is applied to the springback and failure criteria. To optimize these two criteria, a global optimization algorithm was chosen. It is the Simulated Annealing algorithm hybridized with the Simultaneous Perturbation Stochastic Approximation in order to gain in time and in precision. The multicriteria problems amounts to the capture of the Pareto Front associated to the two criteria. Normal Boundary Intersection and Normalized Normal Constraint Method are considered for generating a set of Pareto-optimal solutions with the characteristic of uniform distribution of front points. The computational results are compared to those obtained with the well-known Non-dominated Sorting Genetic Algorithm II. The results show that our proposed approach is efficient to deal with the multicriteria shape optimization of highly non-linear mechanical systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.77-82
• /
• 2020

In this paper, E-polarized electromagnetic scattering problems by a conductive strip grating between a double dielectric layer are analyzed by applying the FGMM(Fourier-Galerkin moment method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, and the conductive boundary condition is applied to analysis of the conductive strip. The numerical results for the normalized reflected and transmitted power are analyzed by according as the width and spacing of conductive strip, the relative permittivity and thickness of the double dielectric layers, and incident angles. Generally, as the value of the dielectric constant of the double dielectric layer increases, the reflected power increases and the transmitted power decreases, respectively. As the dielectric constant of the double dielectric layer increases, the current density induced in the strip center increases. The numerical results for the presented structure of this paper are shown in good agreement compared to those of the existing papers.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.83-88
• /
• 2020

In this paper, H-polarized electromagnetic scattering problems by a conductive strip grating between a grounded double dielectric layer are analyzed by applying the FGMM(Fourier-Galerkin Moment Method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, and the conductive boundary condition is applied to analysis of the conductive strip. The numerical results for normalized reflected power are analyzed by according as the width and spacing of conductive strip, the relative permittivity and thickness of the grounded double dielectric layers, and incident angles. Generally, as the value of the dielectric constant and dielectric thickness of a grounded double dielectric layer increases, the reflected power increased. And as dielectric thickness of a grounded double dielectric layer increases, the current density induced in the strip center increases. The numerical results for the presented structure of this paper are shown in good agreement compared to those of the existing papers using the PMM(Point Matching Method).

• Journal of Digital Contents Society
• /
• v.17 no.6
• /
• pp.593-601
• /
• 2016

This paper is related to the Region-based Spectral Correlation Estimation(RSCE) coding method that makes it possible to achieve the high-compression ratio by estimating color component images from luminance image. The proposed method is composed of three steps. First, Y/C bit-plane summation image is defined using normalized chrominance summation image and luminance image, and then the Y/C bit-plane summation image is segmented for extracting the shape information of the regions. Secondly, the scale factor and the offset factor minimizing the approximation square errors between luminance image and R, B images by the each region are calculated. Finally, the scale factor and the offset factor for the each region are encoded into bit stream. Referring to the results of computer simulation, the proposed method provides more than two or three times higher compression ratio than JPEG/Baseline or JPEG2000/EBCOT algorithm in terms of bpp needed for encoding two color component images with the same PSNR.