• 한국초전도ㆍ저온공학회논문지
• /
• 제2권1호
• /
• pp.35-35
• /
• 2000

The main issues for the power application of High Tc superconducting tape are lower AC loss and higher stability conditions. HTS tape has large stability margin by high heat capacity of superconductor itself and high temperature margin. But, it can be damaged by continuous heat generation at quench point, because normal zone propagation velocity by generating heat is very low. Here, we analyze the quench propagation characteristics using finite element method for BSCCO-2223 HTS tape.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권4호
• /
• pp.19-24
• /
• 2021

The low normal zone propagation velocity (NZPV) of high-temperature superconducting (HTS) tape leads to a quench protection problem in HTS magnet applications. To overcome this limitation, various studies were conducted on HTS coils without turn-to-turn insulation (NI coils) that can achieve self-protection. On the other hand, NI coils have some disadvantages such as slow charging and discharging time. Previously, the HTS coils with turn-to-turn insulation (INS coils) were operated in power supply (PS) driven mode, which requires physical contact with the external PS at room-temperature, not in persistent current mode. When a quench occurs in INS coils, the low NZPV delays quench detection and protection, thereby damaging the coils. However, the rotary HTS flux pump supplies the DC voltage to the superconducting circuit with INS coils in a non-contact manner, which causes the INS coils to operate in a persistent current mode, while enabling quench protection. In this paper, a new protection characteristic of HTS coils is investigated with INS coils charging through the rotary HTS flux pump. To experimentally verify the quench protection characteristic of the INS coil, we investigated the current magnitude of the superconducting circuit through a quench, which was intentionally generated by thermal disturbances in the INS coil under charging or steady state. Our results confirmed the protection characteristic of INS coils using a rotary HTS flux pump.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권1호
• /
• pp.32-36
• /
• 2005

With the successful commercialization of Bi-2223 powder-in-tube wire , various attempts in the R & D of the high-Tc superconducting (HTS) magnets for high magnetic field applications are being implemented actively. Operating temperature of HTS magnet has to be maintained at the designed level but the magnetic energy and mechanical disturbance can cause unstable operational temperature of HTS magnet. Especially the generated heat energy of inner HTS winding Is apt to be accumulated . so the normal region appears in HTS winding. This paper deals with the quenching characteristics of three kinds of selected Bi-2223 wires : the High Current Density Wire (HC-A) and the High Strength Wire (HS-A) made by AMSC and HTS wire(HW-I) made by Innost The Innost wire has the highest minimum quench energy (MQE). The High Current Density Wire has the highest normal zone Propagation velocity (NZPV).

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.369-372
• /
• 1999

Using Ag sheathed multi filamentary Bi-2223 tape, stability against heat pulse has been investigated. The measured normal zone propagation(NZP) velocity of the tape was found to be faster due to increase of operating current and magnetic field, and agree well with calculated data from one dimensional heat balance equation. Minimum quench energy(MQE) was found to be larger than 17 J at 30 K zero magnetic filed at operating current of 96.5 with respect to I$_c$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.150-152
• /
• 1995

In order to study the basic I-V behavior and quench characteristics, we fabricated two kinds of small superconducting coils which were wound with different superconductors. In this study, it was made clear that the propagation. velocity of normal zone preferentially depends on the operation current rather than heat pulse energy and also increases exponentially with respect to operation current.

• 한국지구과학회지
• /
• 제32권6호
• /
• pp.640-653
• /
• 2011

이 연구에서는 기존의 탄성파 모델링 알고리즘에 지진 송신원을 적용하고, 음향-탄성파 결합 매질을 구현하여 남극대륙 주변과 같은 극지해역에서 발생할 수 있는 지진파의 거동을 모사한다. 기존의 변위근사 유한차분법과 달리 속도-응력 식으로 구성되는 엇격자 유한차분법의 경우 다양한 송신원을 구현하는데 적합하므로 변위-속도-응력 식에 기초하여 개발된 3차원 엇격자 유한차분법 알고리즘과 이중 우력(Double Couple Forces)을 이용하여 구현한 지진 송신원을 접목시켜 지진파의 거동을 모사한다. 좌수향 주향이동단층, 정단층, 역단층 형태의 지진 송신원에 대해서 개발된 알고리즘을 검증한 결과 이론적으로 예측되는 P파의 초동을 정확히 모사할 수 있었고, 섭입대 모델에 대한 수치모형실험 결과 섭입대에서 역단층에 의해 발생된 후 대륙지각, 해양지각 및 해양에서 전파되는 지진파의 거동양상이 정확하게 모사되는 것을 확인할 수 있었다.