• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.985-989
• /
• 2005

This paper presents chaos synchronization between two different chaotic systems using nonlinear control method. The proposed technique is applied to achieve chaos synchronization for the Lorenz and Rossler dynamical systems. Numerical simulations are also implemented to verify the results.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권4호
• /
• pp.257-261
• /
• 2001

Nonlinear pulse width modulation (PWM) controlled system is considered to achieve control performance of thruster controlled spacecraft. The actual PWM controlled motions occur, very closely, around the average model trajectory. Furthermore nonlinear PWM controller design can be directly applied to thruster controlled spacecraft to determine thruster on-time. Sliding mode control for attitude tracking of three-axis thruster-controlled spacecraft is presented. Simulation results are shown which use modified Rodrigues parameters and sliding mode control law to achieve attitude tracking of a three-axis spacecraft with thrusters.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.987-993
• /
• 1996

This report suggests a new non-linear friction compensation for digital control systems. This control adopts a hysteric nonlinear clement which can introduce the phase lead of the control system to compensate the phase delay comes from the inherent time delay of a digital control. The Lyapunov direct method is used to prove the asymtotic stability of the suggested control, and the stability and the effectiveness are verified analytically and experimentally on a single axis servo driving system.

• 한국정보통신학회논문지
• /
• 제12권12호
• /
• pp.2365-2370
• /
• 2008

본 논문에서는 비선형 시스템의 위치 제어를 위하여 웨이블렛 신경회로망 제어기를 구성하였으며, 웨이블렛 신경회로망은 LQR 제어기의 성능을 향상 시킬 목적으로 사용한다. 불안전한 비선형 시스템을 선형화 시키고 안정화된 선형 시스템을 만들기 위하여 LQR를 사용하며, 외란에 효과적으로 적응하기 위하여 웨이블렛 신경회로망 제어기를 사용한다. 이 제어기를 비선형 시스템의 위치 제어에 적용하여 실험을 통해 그 유효성을 검정하였다.

• 한국정밀공학회지
• /
• 제13권2호
• /
• pp.94-101
• /
• 1996

The equations of motion for a basic industrial robotic system which has a rigid or a flexible arm are derived by Lagrange's equation, respectively. Especially, for the deflection of the flexible arm, the assumed mode method is employed. These equations are highly nonlinear equations with nonlinear coupling between the variables of motion. In order to design the control law for the rigid-arm robot, Hunt-Su's nonlinear transformation method and Marino's feedback equivalence condition are used with linear quadratic regulator(LQR) theory. The control law for the rigid-arm robot is employed to input the desired path and to provide the required nonlinear transformations for the flexible-arm robot to follow. By using the implicit Euler method to solve the nonlinear equations, the comparison of the motions between the flexible and the rigid robots and the effect of flexibility are examined.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.492-495
• /
• 1997

Integral type system is that a system is represented by a proper rational function. In this paper, novel control scheme based on model reference approach is proposed for integral type system. The proposed scheme compensates various undesirable effects of the system. In especially, the proposed scheme applied to DC servo control system, analyzed its control characteristic. Performances of the proposed system show excellent control characteristics; complete compensation of the undesirable nonlinear friction and load viscous, For proving realistic validities, LOS(Line Of Sight) stabilization system which has typically many nonlinear effects is experimented. After executing the computer simulation in "MATLAB", then the results are compared with the experiments. The results are very similar in theoretical study and the proposed control scheme is successfully verified. verified.

• International Journal of Control, Automation, and Systems
• /
• 제4권3호
• /
• pp.302-307
• /
• 2006

The aim of applying Functional Electrical Stimulation (FES) is to restore a person's motor function by directly supplying the controlled electrical currents to the site of the paralyzed muscles. However, most clinically utilized FES systems have adapted an open-loop control scheme. Recently the closed-loop control scheme has been considered for setting up the FES system, but due to the inherent nonlinearities in the musculoskeletal system, the nonlinearities were not fully compensated and it caused the oscillatory responses for tracking the output variables. In this study, a nonlinear controller model that has two inverse compensation units is proposed with the compromising feedback linearization method and this will eventually be used to design the FES control system for stimulating a knee joint musculoskeletal system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.85-89
• /
• 1998

A switching power stage is a very nonlinear system because it has two or more operation modes in one switching cycle. To model a switching power stage, the state space averaging method has been developed. Though it allows a unified treatment of a large variety of switching power stages, the model it yields is always very nonlinear. So, it is required to linearize the averaged model. But it is well known that a controller for a nonlinear plant designed by the linearization frequently fails in showing satisfactory control performance. Hence it is very natural to try to design a nonlinear controller for a switching power stage. In design of a switching power system, nonlinear control approaches such as adaptive control and fuzzy control have been widely studied so far. In this research, a recently developed control method, time delay control is briefly studied and a design example for a ZVS PWM half bridge converter is given. The performance of the time delay controller is compared to its conventional counterpart, PI controller by computer simulations.

• 제어로봇시스템학회논문지
• /
• 제17권12호
• /
• pp.1188-1193
• /
• 2011

A nonlinear version of disturbance observer is presented. The system under consideration is an uncertain single input single output nonlinear system and the nominal plant is also a nonlinear system. Compared to the previous implementation given in [8], the proposed scheme does not require an auxiliary variable anymore, thus it has a simpler and more intuitive structure. A robust stability condition for the overall closed-loop system is also provided.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.236-242
• /
• 1992

Multi-layered neural networks are applied to the identification and control of nonlinear dynamical system. Traditional adaptive control techniques can only deal with linear systems or some special nonlinear systems. A scheme for combining multi-layered neural networks with model reference network techniques has the capability to learn the nonlinearity and shows the great potential for adaptive control. In many interesting cases the system can be described by a nonlinear model in which the control input appears linearly. In this paper the identification of linear and nonlinear part are performed simultaneously. The projection algorithm and the new estimation method which uses the delta rule of neural network are compared throughout the simulation. The simulation results show that the identification and adaptive control schemes suggested are practically feasible and effective.