• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.101-106
• /
• 2020

This paper relates with the VS-QE-MMA (Varying Stepsize-Quantized Error-MMA) based on the varying stepsize for improving the equalization performance in the QE-MMA adaptive equalization algorithm that is possible to reducing the intersymbol interference occurred at channel. The SE-MMA use the high-order statistics of transmitted signal and sign of error signal. The QE-MMA was appeared for the H/W implementation easiness substitutes the multiplication and substraction into the shift and substraction in the updating the tap coefficient based on the power-of-two operation of error signal magnitude. The QE-MMA gives degradation of equalization performance due to the such simplification of arithmetic operation. For improving this problem, the propose algorithm, namely VS-QE-MMA, applies the varying stepsize of the nonlinear transformation of error signal. It was confirmed by simulation that the VS-QE-MMA gives better performance than current QE-MMA in the same channel and signal to noise ratio. As a result of simulation, the VS-QE-MMA has more better performance in the every performance index, and it was also confirmed that the varying stepsize effect can be obtained in the greater than 10dB of signal to noise ratio.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1714-1728
• /
• 2016

This paper presents improved harmonics extraction based on Adaptive Linear Neuron (ADALINE) algorithm for single phase photovoltaic (PV) shunt active power filter (SAPF). The proposed algorithm, named later as Improved ADALINE, contributes to better performance by removing cosine factor and sum of element that are considered as unnecessary features inside the existing algorithm, known as Modified Widrow-Hoff (W-H) ADALINE. A new updating technique, named as Fundamental Active Current, is introduced to replace the role of the weight factor inside the previous updating technique. For evaluation and comparison purposes, both proposed and existing algorithms have been developed. The PV SAPF with both algorithms was simulated in MATLAB-Simulink respectively, with and without operation or connection of PV. For hardware implementation, laboratory prototype has been developed and the proposed algorithm was programmed in TMS320F28335 DSP board. Steady state operation and three critical dynamic operations, which involve change of nonlinear loads, off-on operation between PV and SAPF, and change of irradiances, were carried out for performance evaluation. From the results and analysis, the Improved ADALINE algorithm shows the best performances with low total harmonic distortion, fast response time and high source power reduction. It performs well in both steady state and dynamic operations as compared to the Modified W-H ADALINE algorithm.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.65-72
• /
• 2001

This paper deals with a novel full digital control of the single-phase PWM(Pulse Width Modulation) inviter for UPS(Uninterruptible Power Supp1y). The voltage and current of output filter capacitor as a state variable are the feedback control input. In the proposed scheme a double deadbeat control consisting of minor current control loop and major voltage control loop have been developed In addition, a second order deadbeat currents control which should be exactly equal to its reference in two sampling time without error and overshoot is proposed to remove the influence of the calculation time delay. The load current prediction is achieved to compensate the load disturbance. The simulation and experimental result shows that the proposed system offers an output voltage with THD(Total Harmonic Distortion) less than 5% at a full nonlinear load.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.11
• /
• pp.1026-1033
• /
• 2004

Clipping is a simple and convenient PAPR reduction method to prevent the high-speed OFDM communication system from the nonlinear distortion. However, it inherently produces clip noise so that BER performance can be degraded. Clipping noise can be divided into in-band and out-of-band clipping noise. In this paper, we study the clipping effect on the forward link of the OFDM-FDMA system. BER performance of OFDM-FDMA system using clipping method is theoretically analyzed. We also investigate the BER performance of the clipped OFDM-FDMA signal through the HPA. From the simulation results it can be quantified how much the BER performance of OFDM-FDMA system is degraded by the clipping method. From the study results, we can choose the appropriate IBO value and CR(clip ratio) to get the desired BER performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.276-282
• /
• 2003

OFDM is effective for the high speed data transmission. However, the nonlinear distortion is a serious problem because of the high PAPR due to many subcarriers. The conventional SLM selects the OFDM signal with the lowest PAPR. In this method, OFDM data can be correctly recovered only if the side information about the phase sequence is transmitted to receiver. This paper proposes a new method of side information insertion into the conventional SLM and reduces the computational complexity by adaptive method. Performances are compared in case that three kinds of phase sequences are used for phase rotation factor. The adaptive SLM method has the same PAPR reduction as the conventional SLM method. The required BER can be guaranteed by the proposed method. When subcarrier number N=32, computational complexity is reduced to 48 %, 72 % and 51 % for the branch number U=4, 8 and 16, respectively.

• Journal of Advanced Navigation Technology
• /
• v.20 no.2
• /
• pp.161-166
• /
• 2016

In high capacity and long haul optical communication systems, signal distortion is induced by chromatic dispersion and nonlinear effects of optical fibers. Dispersion management (DM) combining with mid-spans spectral inversion (MSSI) is one of the various techniques for overcoming this drawback. The most simple configuration of DM link is obtained by uniformly distributing the lengths of single mode fiber (SMF) and residual dispersion per span (RDPS) over whole fiber spans consisted of optical link. In this paper, the system performances in the uniformly distributed DM link combined with MSSI are assessed as a function of the number of fiber spans, because the system performances in this configuration are used as the significant performance criterion in other link configurations, such as the artificial distribution or the random distribution of SMF lengths and RDPS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2219-2226
• /
• 2013

Optical phase conjugation combining with dispersion management (DM) is promising technique to compensate for signal distortion due to group velocity dispersion (GVD) and nonlinear Kerr effects in optical communication systems. However the fixed residual dispersion per span (RDPS) usually used in the optical links with OPC and DM restricts the flexible link configuration. In this paper, OPC links combining DM of the randomly distributed RDPS is proposed for implementing the flexible optical transmission network. It is confirmed that the excellent compensation in the optical links with the randomly distributed RDPS is obtained, limiting the launch power of WDM channels to the relatively low. It is also confirmed that the relatively high launch power WDM channels are effectively transmitted through the optical links with the randomly distributed RDPS of averaged 50 - 100 ps/nm.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.5
• /
• pp.737-746
• /
• 2004

Two-channel multiwavelet system is investigated for image compression application in this paper. Generally, multiwavelets are known for their superb capability of compressing non-stationary signals like voice. However, multivavelet system have a critical problem in processing and compressing image data due to mesh-grid visual artifacts. In our two-channel multiwavelet system we have investigated incorporation of pre and post filtering to the multiwavelet transform and compression system for alleviating those ingerent visual artifacts due to multiwavelet effect. In addition, to quantify the image data compression performance of proposed multiwavelet system, computer simulations have been performed using various image data. For bit allocation and quantization, the Lagrange multiplier technique considering data rate vs. distortion rate along with a nonlinear companding method are applied equallly to all systems considered, here. The simulation results have yielded 1 ~ 2 dB compression enhancement over the scalar savelet systems. If the more advanced compression methods like SPIHT and run-length channel coding were adopted for the proposed multiwavelet system, a much higher compression gain could be obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3C
• /
• pp.248-255
• /
• 2002

An RF module in compliance with the IEEE 802.11a standard has been designed and its performance has been measured. Conventional heterodyne architecture with 580MHz intermediate frequency has been realized. Measurement results show that the receiver has a low Noise Figure of 5dB, the maximum gain of 70dB, and dynamic range as wide as 61dB. Also, the SAW filter used for channel selection in the IF section allowed minimum inter-channel interference. in addition to satisfying the RF output power requirement, the transmitter features its output P1dB as high as 34dBm so that the high peak-to-average ratio of the Orthogonal Frequency Division Multiplexing (OFDM) modulation scheme can be handled with minimum nonlinear distortion. The output P1dB of 34dBm of the transmitter corresponds to back-off powers of 18dB and 11dB with respect to the output power for the low and the middle frequency bands, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.152-161
• /
• 2017

The CBTC(Communication based Train Control) system employed on 2.4GHz ISM band adopt the IEEE802.11.x standard. Therefor communication time delay, distortion and data losses will be produced. To overcome these problems, CPSK(Continuous Phase shift keying) modulated DS/SS(Direct Sequence Spread Spectrum) transmitter with 908MHz carrier frequency is proposed. Through the eye diagram and scatter diagram the performance is analysed. And the phase noise characteristic of the local oscillator is measured about 60dBc/Hz, this means that the phase noise performance is very good compared to the signal. Reference frequency suppression of the 2nd local oscillator is 50dB below compared to the signal. Through the polarities of the complementary signal equally probable, the line spectrum of the output spectrum is eliminated. The nonlinear effects which introduce the spectral spreading or spectral regeneration is reduced remarkably.