• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 춘계학술대회 학술발표 논문집
• /
• pp.59-62
• /
• 2000

In cope with insufficient agricultural labor and requirement of high quality product Hydroponics is a really good method. It makes the high density agriculture possible and all the growing environments controllable. So its research is so much progressing to maximize the quantity and quality of farm products. Furthermore, the big progress, in the research of a future agriculture, is systematically conducted for the automatic controlled system. In this paper, a new approach to the automation of the cultivation in a green house is suggested and a practical automatic control cultivation system is implemented. To automatically control and optimize the very nonlinear and time-varying growth of farm products, a hybrid strategy(FECA; Fuzzy Expertized Control Algorithm) is proposed which serially combines a fuzzy expert system with the fuzzy logic control. The fuzzy expert system(FMES; Fuzzy Model-based Expert System) is intended to overcome the non-linearity of the growth of farm products. The part of fuzzy controller is incorporated to solve the time-variance of the growth of farm products. Finally, the efficiency and the effectiveness of the implemented agricultural automation system is presented through the cultiviation results.

• 전력전자학회논문지
• /
• 제3권1호
• /
• pp.77-84
• /
• 1998

본 논문에서는 비선형상태피드백을 적용한 무효전력보상기의 제어시스템을 설계하여 시뮬레이션과 축소모형 실험에 의한 성능해석에 관해 기술하였다. 무효전력 보상기의 수리모형을 3상 등가회로와 대표적인 동작점에 대한 상태방정식을 이용하여 도출하였으며, 비선형 상태피드백을 고려한 무효전력 보상기의 동특성을 표현하는 전달함수를 유도하였다. 또한 근궤적을 이용한 시스템 안정도 해석을 실시하여 제어시스템 설계를 실시하였다. 고안된 제어시스템의 성능해석은 EMTP를 이용한 시뮬레이션과 축소모형 실험을 통해 검증하였는데, 검증결과 고안된 제어시스템은 송전계통의 무효전력보상에 우수한 성능을 갖음이 확인되었다.

• Journal of Power Electronics
• /
• 제13권1호
• /
• pp.122-138
• /
• 2013

Adaptive control of a peak current mode controlled (PCM) boost converter supplied by a PEM fuel cell is described in this paper. The adaptive controller with reference model and signal adaptation is developed in order to compensate the deviation of the response during the change of the operating point. The procedure for determining the adaptive algorithm's weighting coefficients, based on a combination of the pole-zero placement method and an optimization method is proposed. After applying the proposed procedure, the optimal adaptive algorithm's weighting coefficients can be determined in just a few iterations, without the use of a computer, thus greatly facilitating the application of the algorithm in real systems. Simulation and experimental results show that the dynamic behavior of a highly nonlinear control system with a fuel cell and a PCM boost converter, can fairly accurately be described by the dynamic behavior of the reference model, i.e., a linear system with constant parameters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2992-2994
• /
• 2000

In cope with insufficient agricultural labor and requirement of high quality product Hydroponics is a really good method. It makes the high density agriculture possible and all the growing environments controllable. So its research is so much progressing to maximize the quantity and quality of farm products. Furthermore, the big progress, in the research of a future agriculture. is systematically conducted for the automatic controlled system. In this paper, a practical automatic control cultivation system is implemented. To automatically control and optimize the very nonlinear and time-varying growth of farm products, a hybrid strategy(FECA: Fuzzy Expertized Control Algorithm) is proposed which serially combines a fuzzy expert system with the fuzzy logic control. The fuzzy expert system (FMES: Fuzzy Model-based Expert System) is intended to overcome the non-linearity of the growth of farm products. The part of fuzzy controller is incorporated to solve the time-variance of the growth of farm products. Finally. the efficiency and the effectiveness of the implemented agricultural automation system is presented through the cultivation results.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.71-78
• /
• 2007

There have been continuous efforts to automate welding processes. This automation process could be said to fall into two categories, weld seam tracking and weld quality evaluation. Recently, the attempts to achieve these two functions simultaneously are on the increase. For the study presented in this paper, a vision sensor is made, and using this, the 3 dimensional geometry of the bead is measured in real time. For the application in welding, which is the characteristic of nonlinear process, a fuzzy controller is designed. And with this, an adaptive control system is proposed which acquires the bead height and the coordinates of the point on the bead along the horizontal fillet joint, performs seam tracking with those data, and also at the same time, controls the bead geometry to a uniform shape. A communication system, which enables the communication with the industrial robot, is designed to control the bead geometry and to track the weld seam. Experiments are made with varied offset angles from the pre-taught weld path, and they showed the adaptive system works favorable results.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권11호
• /
• pp.1382-1387
• /
• 1999

This paper presents an optimal fuzzy power system stabilizer to damp out low frequency oscillation. So far fuzzy controllers have been applied to power system stabilizing controllers due to its excellent properties on the nonlinear systems. But the design process of fuzzy logic power system stabilizer requires empirical and heuristic knowledge of human experts as well as many trial-and-errors in general. This paper presents and optimal design method of the fuzzy logic stabilizer using the genetic algorithm. Non-symmetric membership functions are optimally tuned over an evaluation function. The present inputs of fuzzy stabilizer are torque angle error and the change of torque angle error without loss of generality. The coding method used in this paper is concatenated binary mapping. Each linguistic fuzzy variable, defined as the peak of a membership function, is assigned by the mapping from a minimum value to a maximum value using eight bits. The tournament selection and the elitism are used to keep the worthy individuals in the next generation. The proposed system is applied to the one-machine infinite-bus model of a power system, and the results showed a promising possibility.

• 한국전자통신학회논문지
• /
• 제8권11호
• /
• pp.1681-1690
• /
• 2013

본 논문은 IPMSM(Interior Permanent Magnet Synchronous Motor)의 센서리스 운전을 위해 확장 칼만 필터를 기반으로 하는 속도와 위치 추정기의 설계방법을 제안한다. 제안된 방법은 상태 추정의 정밀도를 향상시키기 위해서 시스템 모델의 상태추정구간을 더욱 세분화하여 나누고, 세분화한 각 구간을 테일러급수 전개하여 일차항만 사용하여 추정하였다. 제안된 상태 추정기는 2차 확장칼만필터에 비해 사전추정의 연산의 양을 크게 하지 않고, 상태추정의 정밀도가 증가함을 시뮬레이션을 통해 보일 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1291-1293
• /
• 2004

The control method of programmable dynamometer for overall test of machine is to load the reference torque which is computed from torque transducer into motor under test. But the torque information detected from torque transducer have a lot of noise when the load torque of meter is a small quantity or changing. Thus, torque transducer must have a low pass filter to detect a definite torque information. But The torque delay generated by filter with torque transducer occur a torque trouble for moter torque of programmable dynamometer. Therefore, this kind of system could not perform dynamic and nonlinear load. In this paper, the control method using the load torque observer without a measure for torque transducer is proposed. The proposed system improved the problem of the torque measuring delay with torque transducer, and the load torque is estimated by the minimal order state observer based on the torque component of the vector control induction meter. Therefore, the torque controller is not affected by a load torque disturbance.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권9호
• /
• pp.515-521
• /
• 2002

This paper presents the scheme that improves control responsibility and stability of the controlled-PM electromagnet levitation system with zero Power controller. A magnetically levitation system is used widely because friction can almost be disappeared. But it is difficult to control due to restraint of controllable area and nonlinear characteristics of electromagnetic force, which is proportioned to a square of the magnetic flux density and is in inverse proportion to a square of the air-gap. So, the application of observer theory in which the levitation system is considered to be a linear dynamic model has resulted in omitting the time dependence on mover's speed. Consequently, the performance of the observer is quite poor during transients. Therefore, this paper proposed the controlled-PM electro-magnetic levitation control method in which the variable load is estimated by using the reduced order extended luenverger observer and its system is controlled at a new zero power equilibrium air-gap position. It is also verified that the proposed control method improve the control performance through simulation and experiment.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.202-215
• /
• 2015

This paper investigates the stability and performance of model predictive controlled active-front-end (AFE) rectifiers for energy storage systems, which has been increasingly applied in power distribution sectors and in renewable energy sources to ensure an uninterruptable power supply. The model predictive control (MPC) algorithm utilizes the discrete behavior of power converters to determine appropriate switching states by defining a cost function. The stability of the MPC algorithm is analyzed with the discrete z-domain response and the nonlinear simulation model. The results confirms that the control method of the active-front-end (AFE) rectifier is stable, and that is operates with an infinite gain margin and a very fast dynamic response. Moreover, the performance of the MPC controlled AFE rectifier is verified with a 3.0 kW experimental system. This shows that the MPC controlled AFE rectifier operates with a unity power factor, an acceptable THD (4.0 %) level for the input current and a very low DC voltage ripple. Finally, an efficiency comparison is performed between the MPC and the VOC-based PWM controllers for AFE rectifiers. This comparison demonstrates the effectiveness of the MPC controller.