• 비파괴검사학회지
• /
• 제12권4호
• /
• pp.32-39
• /
• 1993

Past, present and future of nondestructive testing and evaluation(NDT&E) activities in Korea are reviewed. The current status and future direction in NDT&E research and development are presented. The newly revised edition of Korean NDT personnel qualification system is described. Other activities such as NDT&E training programs, NDT field services, and professional societies and international cooperation are also summarized. Founded in 1980, the Korean Society for Nondestructive Testing is now the center of domestic activities in NDT&E as well as the gateway to the international cooperation.

• 비파괴검사학회지
• /
• 제9권1호
• /
• pp.48-55
• /
• 1989

It is desirable to develop the effective NDT techniques to evaluate the strength of composite structures. In this study several of acoustic NDT techniques were applied to investigate useful parameters for evaluating the filament wound GFRP structures and following results were obtained. 1. Propagation velocity of stress wave to axial direction in the filament wound GFRP pipe depends on the effective modulus along the propagation direction and source location was parcticable from the a measured velocities. 2. By the application of acoustic emission techniques to GFRP pipe during hydraulic test, it was proven to be possible to detect the damage initiating pressure which could be evaluated nondestructively through the measuring of stress wave energy factor(SWEF). 3. The final failure pressure of GFRP was greatly influenced in the presence of pass through defects, and void-like defects were more dangerous than the laminar type defects.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.258-262
• /
• 2001

The contact resistivity was correlated with IFSS and microfailure modes in conductive fiber/cement composites electro-pullout and AE. As IFSS increased, the number of AE signals increased and the contact resistivity increased latter to the infinity. In dual matrix composite (DMC) test and AE, the number of signals with high amplitude and energy in g]ass fiber composite is significantly larger than that of no-fiber composite. Many vertical and diagonal cracks were observed in glass fiber and no-fiber composite under tensile test, respectively. Electro-micromechanical technique and AE can be used efficiently for sensitive nondestructive (NDT) evaluation and to detect microfailure mechanisms in various conductive fibers reinforced brittle and nontransparent cement composites.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.164-168
• /
• 1995

As nation's infrastructure is getting old, nondestructive evaluation of existing structures and construction quality control are getting important. In this paper non-destructive evaluations of concrete members using impact echo and SASW methods are introduced. Both techniques are based on the stress wave propagations. Experimental tests were performed using beam type concrete member where voids and cracks are included. Within reasonable accuracy, void locations were detected using impact echo method and the dynamic modulus of concrete were measured using SASW method. Both NDT methods showed a feasibility for the implementation into quality evaluaton of concrete members in practice

• 비파괴검사학회지
• /
• 제31권4호
• /
• pp.398-413
• /
• 2011

철도 레일의 주기적인 탐상은 레일 결함으로 인해 발생할 수 있는 철도 중대사고를 미연에 방지할 수 있는, 철도 안전 유지의 중요한 요소 중 하나이다. 본 논문은 현재 철도 레일 탐상에 적용되고 있거나, 적용을 위해 연구 중인 비파괴탐상 기법들에 관해 기술하였다. 레일에 발생하는 결함 유형에 대해 우선 언급하였고, 레일 탐상에 가장 많이 적용되고 있는 압전형 탐촉자 기반의 초음파탐상 기술에 대해 정리하였다. 접촉식 초음파 레일 탐상 기술에 대한 대안으로서 연구 중이거나 시험 중인 비파괴탐상 기법들에 대해 기술하고, 각 기법 별로 레일의 표면 및 내부 결함 검출 가능 여부에 대해 살펴보았으며 여러 탐상 기법들에 대한 비교를 통해 향후 레일 탐상 기술 개발에 활용하고자 하였다.

• 비파괴검사학회지
• /
• 제21권6호
• /
• pp.607-611
• /
• 2001

초음파검사 시스템은 검사자, 검사장비, 검사절차서로 구성되어진다. 따라서 각각의 구성의 성능에 따라 초음파검사의 신뢰도가 좌우되며, 또한 검사환경이나 검사체의 재질, 결함의 유형에 따라서도 검사의 신뢰도는 영향을 받게된다. 이러한 다양한 인자들로 인해 비파괴검사의 신뢰도를 평가하는 것이 쉽지 않다. 본 연구에서는 로지스틱 모델과 몬테 카를로 시뮬레이션을 이용하여 초음파검사의 신뢰도를 척도할 수 있는 검출확률을 평가하고자 한다. 신뢰도 평가의 유용성을 검증하기 위해 원진배관에 대한 순회시험의 데이터에 신뢰도 평가 모델을 적용하였다.

• 비파괴검사학회지
• /
• 제30권3호
• /
• pp.212-224
• /
• 2010

The usefulness of the magnetic camera for non-destructive testing of aging aircraft is discussed in this paper. The magnetic camera can be used f magnetic particle testing(MT), magnetic flux leakage testing(MFLT), eddy current testing(ECT) and penetration testing(PT). It measures the distribution of a magnetic field and visualizes the magnetic pattern. Near and far side cracks, fatigue, thickness degradation, and cracks under rivets have been detected. The possibility of quantitative evaluation was also examined. Using indirect experiments, we verified the detection ability of the sensor for cracks in titanium and advanced composite materials.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.108-117
• /
• 2004

In this paper, a measuring NDT(nondestructive testing) system using RUS(Resonant Ultrasound Spectroscopy) was built for nondestructive evaluation of the flaw in a ceramic Ferrule. The principle of RUS is that the mechanical resonant frequency of the materials depends on density, and the coefficient of elasticity. The RUS system is the measuring which is to exite specimen and to inspect the difference of natural frequency pattern between acceptable specimen and specimen which has some defects. RUS system is configured of spectrum analyzer, power amplifier, PZT sensor and support frame. For defect evaluation by the RUS, we performed to measure natural frequency of Ferrule, both acceptable and cracked. In the case of Ferrule, the resonant frequency of cracked-Ferrule existed to higher frequency band than acceptable-Ferrule.

• 비파괴검사학회지
• /
• 제11권1호
• /
• pp.23-30
• /
• 1991

In this study the bonding quality evaluation of FRP honeycomb structure was performed by the ultrasonic C-Scan method and stress wave factor measurements. These NDT techniques could be well applied to the disbonding detection of FRP honeycomb structures. Especially, stress wave factor (SWF) measurement is expected to be a useful technique in field applications.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.116-120
• /
• 2001

Fiber fracture is one of the dominant failure phenomena to determine total mechanical properties in composites. Fiber fracture locations were measured by optical microscopic method and acoustic emission (AE) as functions of matrix toughness and surface treatment by the electrodeposition (ED), and then two methods were compared. Two AE sensors were attached on the epoxy specimen and fiber fracture signals were detected with elapsed time. The interfacial shear stress (IFSS) was measured using tensile fragmentation test and AE system. In ED-treated case, the number of the fiber fracture measured by an optical method and AE was more than that of the untreated case. The signal number measured by AE were rather smaller than the number of fragments measured by optical method, since some fiber fracture signals were lost while AE detection. However, one-to-one correspondence between the x-position location by AE and real break positions by optical method was generally established well. The fiber break source location using AE can be a valuable method to measure IFSS for semi- or nontransparent matrix composites nondestructively (NDT).