• Korean Journal of Materials Research
• /
• v.6 no.1
• /
• pp.49-56
• /
• 1996

TiO2/Ag 계 적층형 투명 열절연 박막의 최적 제작조건 설정을 위한 기초 연구로써, 스퍼터조건에 따른 결정구조 및 광학특성 변화거동을 관찰하였다. 반응성 스퍼터링에 의한 TiO2박막 제작조건에 따른 결정구조 및 광학특성 변화거동을 관찰하였다. 반응성 스퍼터링에 의한 TiO2 박막 제작시 Po2/PAr$\leq$0.2에서는 $\alpha$-TiO2 의 결정구조였으나, Po2/PAr$\leq$0.2에서는 기판 온도(RT-37$0^{\circ}C$) 및 열처리 온도(100-80$0^{\circ}C$)에 관계없이 non-stoichiometric 화합물로 판명되어, 산소 분압비가 TiO2 의 조성제어에 가장 중요한 변수로 나타났다. TiO2 박막은 열처리 온도의 증가(100-80$0^{\circ}C$)에 따라 굴절률이 증가(2.19-2.37)하는 경향이었는데, 이는 박막의 밀도증가에서 기인하는 것으로 판단된다. Ag 박막은(111)면과 (200)면이 우세한 결정립으로, 기판 온도(RT-37$0^{\circ}C$) 및 열처리(100-80$0^{\circ}C$)에 따라 등축상의 결정립 성장을 관찰할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.575-575
• /
• 2013

Indium Zinc Oxide (IZO)는 가시광 영역(380~780 nm)에서 높은 투과율과 적외선영역에서 높은 반사율을 보이는 투명산화막으로서 Flexible display 적용으로 주목 받는 재료이다. 특히 비 화학적 양론비(non-stoichiometric)로 성장된 박막은 N형 반도체 특성을 갖기 때문에 광전자 소자, 액정표시소자와 태양전지의 투명전극 재료로 이용되고 있으며, 향 후에도 수요는 계속 증가될 전망이다. 일반적으로 IZO 박막은 높은 열처리 온도에 의한 기판재료의 선택이 한정적인 단점이 있다. 따라서 최근에는 정밀하게 제어된 에너지를 가진 전자를 표면에 조사(E-beam irradiation)하여 박막의 물성을 개선하고 기판재료의 선택성을 넓히는 연구가 활발히 진행되고 있다 [1]. 본 연구에서는 RF Magnetron Sputtering 법을 이용하여 Glass 위에 IZO를 증착하였다. 스퍼터링타겟은 고순도 IZO 타겟을 이용하여 100 nm의 두께를 가지는 박막을 증착하였다. 증착된 IZO 박막에 E-beam Source ((주)인포비온)를 이용하여 E-beam irradiation energy 조건에 변화를 주어 박막의 물성 변화를 관찰하였다. IZO 박막의 두께를 측정하기 위해 SEM (Cross section)을 이용하였다. E-beam irradiation energy에 따른 가시광 영역(380~780 nm)에서의 광투 과도는 UV-Vis spectrometer를 사용하여 측정하였고, 전기적인 특성은 Hall measurement system 을 이용하여 측정하였다. 또한 박막의 결정성과 거칠기의 변화는 XRD (X-ray Diffraction)와 원자 간력현미경(Atomic Force Microscope; AFM)을 이용하여 측정하였다. Rf magnetron Sputtering 법을 이용하여 증착한 IZO 박막에 Post E-beam irradiation이 전기전도 및 광 투과특성과 결정성과 표면 조도를 향상시키는데 크게 기여함을 확인할 수 있었다.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.39-41
• /
• 2012

The influence of coal blending methods such as out-furnace (external or pre-mixed) blending and in-furnace (initially non-mixed) blending with different excess oxygen (highest, medium, and lowest stoichiometric conditions) on unburned carbon and NOx emissions of blend combustion in an entrained flow reactor (EFR) has been analyzed, using experimental and numerical approaches for binary coals used by Korean power plants. The results confirm that under the medium condition, contrasting processes such as reactive and un-reactive effects occur with SBRs in the out-furnace blending method. The in-furnace blending method results in an improvement in the efficiency of unburned carbon fractions and a further reduction in the NOx emission. Under the highest condition, the unburned carbon fraction in both the out-furnace and the in-furnace blending methods corresponds with the tendency under the medium condition with contrasting processes of lower magnitude, whereas the NOx emission in the highest condition increases slightly. Under the lowest conditions, the unburned carbon fraction in the out-furnace blending method gradually decreases as SBR decreases, without a competition effect. The reduction of NOx emission under the lowest conditions is more effective than those under other conditions for the two blending methods because of a homogeneous and heterogeneous NOx reduction mechanism.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.254-254
• /
• 2006

The sensitivity of plasmid DNA (pDNA) to S1 nuclease, an enzyme to cleave a single-strand DNA, was dramatically modulated through a supramolecular assembly (polyion complex micelle) with a synthetic block copolymer, poly(ethylene glycol)-b-poly(L-lysine) (PEG-PLL). The pDNA condensed in stoichiometric charge ratio was cleaved into 7 fragments each being 10/12, 9/12, 8/12, 6/12, 4/12, 3/12, and 2/12 of the original DNA length, on the other hand, the pDNA condensed in higher charge ratios (>4), were digested into non-specific manner. Condensation of the pDNA was investigated from two viewpoints that how does the rigid DNA molecules fold and condense and how does the condensation influence their biological activity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.241-242
• /
• 2008

The Velocity Autocorrelation Function (VAF) of the sodium ions is calculated for a range of temperature from 250K to 1000K and converted into the linear ac-conductivity and ac-susceptibility response via Fourier transformation. A peak is found in the conductivity around $6\times10^{12}$ Hz that has some of the character of a Poley absorption. Here it is shown to be due to an harmonically coupled site vibrations of the sodium atoms, which extend only over a limited range. At frequencies below the peak the conductivity tends towards a constant i.e. dc value corresponding to a constant flow of ions through the simulation cell. At high temperatures the conductivity due to this ion transport process behaves like a metal with an insulator to metal transition occurring around a specific temperature.

• Journal of Life Science
• /
• v.12 no.2
• /
• pp.75-79
• /
• 2002

Tea catechins, the most important compounds in tea polyphenols, can efficiently scavenge superoxide anion free-radical ($O_2$.), hydroxyl radical. (.OH) The mechanism of scavenging active oxygen free radicals was investigated by ESR spin trapping technique and Chemiluminescence. Results showed that various tea catechins constitute an antioxidant cycle in accordance with the decreasing order of the first reductive potential, and produce the effect of cooperative strength each other. Esterificated catechins could scavenge active oxygen free radicals more effectively than the non-esterificated ones. When.OH and $O_2$.- were scavenged by (-)-epigallocatechin gallate [(-)- EGCG], the stoichiometric factors were 6, and the rate constants of scavenging reaction reached $7.71{\times}10^6$ and $3.52{\times}10^{11}$ L $mmol^{-1}s^{-1}$, respectively. In the mean time, tea catechins could scavenge superoxide anion fiee radical ($O_2$-.) and hydroxyl radical (.OH) in a dose dependent manner. But at higher concentration or pH value, tea catechins can induce the prooxidant.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.4
• /
• pp.225-229
• /
• 2006

TiAlN coatings are available in various industry fields as a wear resistant coating for high-speed machining, due to its high hardness, excellent oxidation and corrosion resistance. The corrosion resistance of TiAlN multilayer coatings is better than that of single TiN coatings. Most of TiAlN coated layers were formed by heat treatment of coating layers with a non-stoichiometric $Ti_xAl_{1-x}N$. In this study, TiAlN coated layer was prepared by R.F magnetron sputtering and investigated the thermal behavior for heat treatment at various temperature in tube furnace. The formation of large particles with porous microstructure and phase change from HCP to FCC were observed on coated layer during heat treatment over $850^{\circ}C$ and it reduced the corrosion resistance of coated TiAlN layers.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.113-120
• /
• 2011

Precipitated calcium carbonate(PCC), particularly calcite crystal, is extensively used as a pigment, filler or extender in various industries such as paper, paint, textile, detergents, adhesives, rubber and plastics, food, cosmetics, and biomaterials. PCC is conventionally produced through the gas-liquid carbonation process, which consists on bubbling gaseous $CO_2$ through a concentrated calcium hydroxide slurry. This study is aimed to find some factors for controlling the morphology of engineered PCC in lab-scaled mixing batch. The experimental designs were based on temperature variables, $Ca(OH)_2$ concentration, $CO_2$ flow rate, and electrical conductivity. The model of engineered PCC morphology was finally controlled by adjustment of electrical conductivity(6.0~7.0 mS/cm) and $Ca(OH)_2$ concentration(10 g/L). Orthorhombic calcite crystals were mostly created at high concentration and electrical conductivity conditions because the increased ratio of $Ca^{2+}$ and $CO{_3}^{2-}$ ions affects the growth rate of orthorhombic faces. Excess calcium spices were contributed to the growth of faces in calcium carbonate crystal, and the non-stoichiometric reaction was occurred between $Ca^{2+}$ and $CO{_3}^{2-}$ ions during carbonation process.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.45-50
• /
• 2004

Hydroxyapatite (HA) ceramics with the Ca/P ratios of 1.62, 1.67 and 1.72 were prepared and their dissolution behaviors in distilled water at $37^{\circ}C$ were investigated. It appeared that surface dissolution of the ceramics was initiated from grain boundaries after 3 days of immersion in water. Following 10 days of immersion, microstructural disintergration of HA was severs for non-stoichiometric compounds, I.e Ca/P ratios of 1.62 and 1.72. Notably, a micron-sized circular cavity similar to lacunae, which can be generally formed in osteoclastic resorption process, was observed.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1352-1354
• /
• 1997

Transparent conductive thin films have found many application in many active and passive electronic and opto-electronic devices as like flat Panel display electrode and window heat mirror, etc. Low resistivity and high transmittance of this films can be obtained by controlling deposition parameters, which are oxygen partial Pressure, substrate temperature and dopant concentration. In this study, We prepared non-stoichiometric and Sb-doped thin films of tin dioxide by reactive DC magnetron sputtering technology. The lowest resistivity of about $3.0{\times}10^{-3}\;{\Omega}cm$ and 80% transmittance in the visible light region have heed obtained at optimal deposition condition.