• Economic and Environmental Geology
• /
• v.39 no.5 s.180
• /
• pp.607-613
• /
• 2006

For the reasonable use of low grade-shallow geothermal energy by Standing Column Well(SCW) system, the basic requirements are depth-wise increase of earth temperature like $2^{\circ}C$ per every 100m depth, sufficient amount of groundwater production being about 10 to 30% of the design flow rate of GSHP with good water quality and moderate temperature, and non-collapsing of borehole wall during reinjection of circulating water into the SCW. A closed loop type-vertical ground heat exchanger(GHEX) with $100{\sim}150m$ deep can supply geothermal energy of 2 to 3 RT but a SCW with $400{\sim}500m$ deep can provide $30{\sim}40RT$ being equivalent to 10 to 15 numbers of GHEX as well requires smaller space. Being considered as an alternative of vertical GHEX, many numbers of SCW have been widely constructed in whole country without any account for site specific hydrogeologic and geothermal characteristics. When those are designed and constructed under the base of insufficient knowledges of hydrgeothermal properties of the relevant specific site as our current situations, a bad reputation will be created and it will hamper a rational utilization of geothermal energy using SCW in the near future. This paper is prepared for providing a guideline of SCW design comportable to our hydrogeothermal system.

• Tunnel and Underground Space
• /
• v.11 no.2
• /
• pp.109-119
• /
• 2001

Up to now single large cavern was excavated for each undergroud hydraulic powerhouse in Korea. But the Yangyang underground hydraulic powerhouse consists of two large caverns; a powerhouse cavern and main transformer cavern. In this carte, the structural stability of the caverns, especially the rock pillar formed between two large caverns, should be guaranteed to be sound to make the caverns permanently sustainable. In this research, the Distinct Element Method(DEM) was used to analyze the structural stability of two caverns and the rock pillar. The Barton-Bandis joint model was used as a constitutive model. The moot significant parameters such as in-site stress, JRC of in-situ natural joints, and spatial distribution characteristics of discontinuities were acquired through field investigation. In addition, two different cases; 1) with no support system and 2) with a support system, were analysed to optimize a support system and to investigate reinforcing effects of a support system. The results of analysis horizontal displacement and joint shear displacement proved to be reduced with the support system. The relaxed zone in the rock pilar also proved to be reduced in conjunction with the support system. Having a support system in place provided the fact that the non zero minimum principal stresses were still acting in the rock pillar so that the pillar was not under uniaxial compressive condition but under triaxial compressive condition. The structural stability f an approximately 36 m wide rock pillar between two large caverns was assured with the appropriate support system.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.69-80
• /
• 1999

Recently, social requirements of personal identification techniques are rapidly expanding in a number of new application ares. Especially fingerprint recognition is the most important technology. Fingerprint recognition technologies are well established, proven, cost and legally accepted. Therefore, it has more spot lighted among the any other biometrics technologies. In this paper we propose a new on-line fingerprint recognition algorithm for non-inked type live scanner to fit their increasing of security level under the computing environment. Fingerprint recognition system consists of two distinct structural blocks: feature extraction and feature matching. The main topic in this paper focuses on the feature matching using the fingerprint minutiae (ridge ending and bifurcation). Minutiae matching is composed in the alignment stage and matching stage. Success of optimizing the alignment stage is the key of real-time (on-line) fingerprint recognition. Proposed alignment algorithm using clique shows the strength in the search space optimization and partially incomplete image. We make our own database to get the generality. Using the traditional statistical discriminant analysis, 0.05% false acceptance rate (FAR) at 8.83% false rejection rate (FRR) in 1.55 second average matching speed on a Pentium system have been achieved. This makes it possible to construct high performance fingerprint recognition system.

• Journal of the Korean Society of Costume
• /
• v.63 no.4
• /
• pp.56-69
• /
• 2013

This study studies the fabrics from excavated 17th century tombs of Mrs. Min from Yeoheung family(1586~1656), Yeo-on Kim(1596~1665) and Won-rip Choi(1618~1690) and attempts to clarify the relationship between the fashion trend in fabrics of those times and the background behind it by viewing and examining the proportion of twill fabrics to the total silk fabrics and the characteristics of its weave and patterns. Looking into fabrics from the above tombs, twill fabrics accounted for 10.4%(13 pieces) 19.3%(16 pieces) and 9.2%(9 pieces) of total silk fabrics in each of the respective tombs. This forms a remarkable contrast with the fact that there was only one piece of twill silk fabrics(0.5%) and not any from the 16th century tombs of Mrs. Yoon from Papyeong family (0.5%) and Soo-ryoon Sim(0%). In particular, the percentage of hwamun-neung(patterned twill fabrics) in each of the tombs is 8.0%(10 pieces), 13.3%(11 pieces), 9.2%(9 pieces), which is much higher than that of non-patterned one. This is common to the twill fabrics from above three 17th century tombs. Patterns of hwamun-neung(patterned twill), simplified small flower patterns or geometrical figures, from the three excavated tombs are mostly arranged sporadically with blank space. It is supposed that these figurative characteristics reflected the aesthetic sense of the gentry at that time which valued simplicity and moderation for their Confucian standard. This phenomenon of increased use and production of twill fabrics in the 17th century resulted from different factors such as wars like Japanese Invasion of Korea(1592~1598), economic difficulty, government regulations against the production of high-class fabrics, development of weaving skill and its fixation, changes of fabric production environments, and changes of aesthetic sense preferring naive and moderate things to showy ones. As for the weaving characteristics of twill fabrics from the three 17th century tombs 3 leaf warp-faced twill was often used for the ground texture and 4 leaf warp-faced one was occasionally used. For pattern texture 6 leaf weft-faced twill was frequently used, 4 leaf weft-faced twill and 3 leaf weft-faced twill were used at times, and floating one was occasionally used as well.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4648-4659
• /
• 2011

Korea experienced rapid urbanization due to high growth of economy. As people left the country and gathered in the city, the size of city has been expanded, resulting in unbalanced development of the land. In addition, it appears in diverse aspects from nationwide phenomenon to the local development in each city unit. In particular, it even tends to become social problems in the metropolitan cities. As a solution for it, this study conducts theoretical consideration on sustainability in the aspect of balanced urban development and suggests measures through analysis on Siheung-city. The result is as follows. First of all, comprehensive approach is required based on sustainability. It is required to derive balanced city development by expanding it to the social, cultural and economic aspects. Second, integrated management policy is required for the original city along with new development. It should be considered together with diverse social and physical aspects. Third, approach from the aspect of city planning is required through consideration on flat city expansion and connection with city space structural. Fourth, in order to foster balanced urban development, it is needed to grope for solutions for imbalanced urban development through the participation of diverse groups such as local residents, private enterprisers, and the non-profit civic groups of the local community along with the mediation among persons interested. And continuous support of administrative authorities should be obtained to create such environment.

• Journal of KIISE
• /
• v.43 no.10
• /
• pp.1115-1123
• /
• 2016

Assumption-based truth maintenance system (ATMS) is a tool that maintains the reasoning process of inference engine. It also supports non-monotonic reasoning based on dependency-directed backtracking. Bookkeeping all the reasoning processes allows it to quickly check and retract beliefs and efficiently provide solutions for problems with large search space. However, the amount of data has been exponentially grown recently, making it impossible to use a single machine for solving large-scale problems. The maintaining process for solving such problems can lead to high computation cost due to large memory overhead. To overcome this drawback, this paper presents an approach towards incrementally maintaining the reasoning process of inference engine on cluster using Spark. It maintains data dependencies such as assumption, label, environment and justification on a cluster of machines in parallel and efficiently updates changes in a large amount of inferred datasets. We deployed the proposed ATMS on a cluster with 5 machines, conducted OWL/RDFS reasoning over University benchmark data (LUBM) and evaluated our system in terms of its performance and functionalities such as assertion, explanation and retraction. In our experiments, the proposed system performed the operations in a reasonably short period of time for over 80GB inferred LUBM2000 dataset.

• Cartoon and Animation Studies
• /
• s.32
• /
• pp.23-42
• /
• 2013

The music videos of and were made based on the music of Pink Floyd and Beatles. This study aims to compare the characteristics of the two songs in terms of music and storytelling method. Previous studies investigated the narrative structure and concept of the storytelling, which are the basis of the images. This study, a comparative study of the two songs, firstly analyzed the narrative structure focusing on the roles and relationships among characters in each song. Secondly, it investigated the method of composition structure and the characteristics of the two pieces of music of which genre is different from each other. Thirdly, it classified the images into intro part, development part, and conclusion part and analyzed by comparison how the song or images inserted in the music interacts with each other. As a result, it was found that described strong progressive rock from the subjective viewpoint through the material storytelling structure by space and it represents the alienation of the hero through simile and metaphor, spatial changes crossing the past and the present, and the actual and non-actual crossover directing. On the other hand, developed a narrative storytelling structure in which progressive fantasy images developed from the psychedelic viewpoint through the confrontation of the good and the bad to deliver the messages of love and peace.

• Tunnel and Underground Space
• /
• v.24 no.4
• /
• pp.255-274
• /
• 2014

The target of this study is large scale rock slope collapsed by around 7 pm on August, 2012, which is located at ${\bigcirc}{\bigcirc}$ limestone quarries of Gangneung city, Gangwondo. The slope prior to the collapse is formed as the height of about 200 m and the average inclination of $45^{\circ}$. The estimated amount of the collapse is about $1,500,000m^3$ with respect to the slope after the collapse. Geotechnical and field investigations such as boring, geophysical prospecting, surface geological survey, geological lineaments, borehole imaging, metric 3D imaging, experimental and field test, mining work by year, and daily rainfall were performed to find the cause of rock slope failure. Various analyzes using slope mass rating, stereonet projection, limit equilibrium method, continuum and non-continuum model were conducted to check of the stability of the slope. It is expected that the cause of slope failure from the results of various analysis and survey is due to the combined factors such as topography, rainfall, rock type and quality, discontinuities, geo-structural characteristics as the limestone cavity and fault zones, but the failure of slope in case of the analysis without the limestone cavity is not occurred. Safe factor of 0.66 was obtained from continuum analysis of the slope considering the limestone cavity, so the ultimate causes of slope failure is considered to be due to the influence of limestone cavity developed along fault zone.

• Tunnel and Underground Space
• /
• v.23 no.6
• /
• pp.480-492
• /
• 2013

After the introduction of geothermal power generation technology based on engineering reservoir creation that can be applied on non-volcanic region, industrial need for studies on the efficient and economic execution of costly deep-depth drilling work becomes manifest increasingly. However, since it is very difficult to predict duration and cost of boring work with acceptable reliability because of many uncertain events during the execution, efficient and organized work management for drilling is not easily achievable. Especially, the round trip that discretely occurs because of the abrasion of bit takes more time as the depth goes deeper and it has a great impact on the work performance. Therefore, a technology that can simulate the occurrence timing and depth of round trip in advance and therefore optimize them is essentially required. This study divided the abrasion state of bit into eight steps for simulation cases and developed a forecast algorithm, i.e., TOSA which can analyze the depth and timing of round trip occurrence. A methodology that can divide a unit section for simulation has been suggested; while the Bourgoyne and Young model has been used for the forecast of drilling rates and bit abrasion extent by section. Lastly, the designed algorithm has been systemized for the convenience of the user.

• The Journal of the Petrological Society of Korea
• /
• v.4 no.1
• /
• pp.49-58
• /
• 1995

Staurolite-biotite-andalusite-garnet (SBAG) assemblage and its sub-assemblages (SBA and SBG) commonly occur in the Dueumri Formation near the Chunyang granite, belonging to andalusite and sillimanite zones. The occurrence of the SBAG mineral assemblage is unusual because it is univariant in the $K_2O-FeO-MgO-Al_2O_3-SiO_2-H_2O$ (KFMASH) model system. We used projection and singular value decomposition (SVD) methods to investigate the equilibrium relationship between SBAG and its sub-assemblage. The SVD modelling of single specimen containing the SBAG assemblage suggests no reaction relationship with respect to mass-balance. Thus, the SBAG assemblages are stabilized by non-KFMASH component. On the other hand, the AFM-Mn projection suggests a reaction relationship between SBAG and its sub-assemblage because they intersect each other in this composition space. The SVD modelling, however, suggests no reaction relationship between these assemblages. Thus, the SBAG assemblages are likely to be stabilized by the variation in bulk-rock composition and/or 1.1~2,. The stable occurrence of staurolite in the sillimanite zone is compatible with pressure estimates from the garnet-plagioclase-biotite-muscovite geobarometer.