• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.121-128
• /
• 2001

This study has been performed to investigate formability of non-vinyl PCM(pre-coated metal)sheet. First, physical test of PCM sheets were tested to evaluate finish coating characteristic of PCM. And then, test equipment was made for friction test and three non-vinyl PCM sheets were tested by straight pulling method. This paper provides the results of the friction tests showing the influence of sheet surface texture and process conditions. It was found that the influence of contact pressure and speed had an effect upon the level of friction. Also using tests, the scratch resistance of a series of polyester coating has been investigated. This investigation aims to clarify the process conditions that prevent the scratch of PCM to form the good electrical appliances such as microwave oven, air conditioner and refrigerator etc.

• Journal of Power System Engineering
• /
• v.6 no.1
• /
• pp.82-87
• /
• 2002

Not only ferrous but also non-ferrous materials such as aluminum, brass, plastic and woods need cutting operation in recent manufacturing industry. Over the past few years a considerable number of studies have been made on non-ferrous metal cutting. But more study is required to meet various engineering needs. The purpose of this paper is to preform an experiment on the influence of feed-rate adjustment and side rake angle in turning operations from non-ferrous metals. As a result, the surface roughness was reduced when a side-rake angle increases and feed-rate decreases in the case of the plastic, brass, aluminum, and paulownia. Therefore, this papers develop a new type bite that be used to adjust side-rake angle.

• Korea Trade Review
• /
• v.47 no.4
• /
• pp.177-195
• /
• 2022

This study analyzed the volatility spillover effect between international non-ferrous metal futures markets using the BEKK-GARCH model. Statistical data are futures price data of copper (CU), aluminum (AL), nickel (NI), tin (SN) from Shanghai Futures Exchange (SHFE) and London Metal Exchange (LME) from April 1, 2015 to December 31, 2021. Combining the research results, first, in the case of copper, aluminum, and nickel, it was found that there was a two-way volatility spillover effect between the Shanghai and London markets, and the international influence of the London market was greater. Second, in the case of the tin, it was found that the Shanghai market has a volatility spillover effect on the London market from stage I, and it is strengthened in stage II. Third, in the case of nickel, it was found that there was a two-way volatility spillover effect in the first stage, but in the second stage, the London market had a unidirectional volatility spillover effect with respect to the Shanghai market. This study confirmed that China's influence in the international non-ferrous metal futures market is gradually increasing. In addition, it suggested that international investors can engage in arbitrage and hedging using China's non-ferrous metal futures market.

• Journal of the Korean Ceramic Society
• /
• v.35 no.4
• /
• pp.392-398
• /
• 1998

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.12a
• /
• pp.87-94
• /
• 2005

Results from previous studies revealed that metal level in the body is related to certain types of diseases. For example. serum copper level with chronic heart failure, iron and transferrin in the blood serum with acute cerebral vascular diseases, Zn in the CNS, lead with neurotoxicity, hypertension, genetic damage, arsenic with cancer skin lesion, Al with neurobehavioral function (cognitive impairment and memory disorder), and etc. The rate of stroke has increased in recent years and several metals were found to be responsible for causing stroke. This study compared several blood metal concentrations between stroke and non-stroke patients. Patients with stroke (116 samples) and non-stroke (111 samples including lowback pain and others) participated in this study. Total of 227 blood samples were collected and participants completed questionnaires regarding age, gender, occupation, residence, alcohol, smoking, and etc. To be qualified into the stroke group, patients have never experienced stroke previously. Subjects only included ischemic stroke and intracerebral hemorrhage patients diagnosed by brain CT and brain MRI. Patients with high risk of metal exposure such as herbal intake and job related exposure were excluded. 10ml of blood samples were analyzed by ICP-MS method at the Center of Nature and Science at Sangji University. Metal geometric mean (SD) concentrations in blood of study subjects showed higher values, 2.64-36.12%, than WHO reference values in Mn, Ni, Hg, Se, and As. Metal concentration in blood of stroke patients non-adjusted for potential confounders was higher except for Hg and also higher except for Ni in adjusted for potential confounders. Co was significantly higher in stroke patients (p=0.002) than non-stroke patients adjusted for potential confounders. Regression coefficient values of stroke patients was 0.17-8.25 in each metals. Odd ratio of stroke patients had 0.96 (Ni)-2.68 (Co) compared to non-stroke cases. This result means that Co increase of 1 raises the risk ratio of stroke by 2.86 times. Based on the results, metal concentration in blood seems to affect incidence of stroke.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.8
• /
• pp.776-781
• /
• 2008

In this study, ubiquitous health care system attaching in chair to monitor ECG for health care was developed at the unconsciousness state. The system conveniently and simple measured ECG at non-consciousness. We measured the contact impedance to skin-electrode of metal mesh electrodes of the system. Contact impedance enable the electrode to use for ECG measurement. The results are that the impedance of the metal mesh electrodes according to sizes is low when the size is 4$cm^2$. As the result, when the size of the metal mesh electrode is 4$cm^2$, the electrode is fit for ECG measurement. We can acquired by positing the arm on the metal mesh electrode. The ECG signal was detected using a high-input-impedance bio-amplifier, and then passed filter circuitry. The measured signal transmitted to a PC through the bluetooth wireless communication and monitored. Data of the non-constrained ECG system attaching in chair is noise-data when comparing metal mesh electrode with the Ag/Agcl electrode but the data is significant to monitor ECG for check the body state.

• Journal of Environmental Science International
• /
• v.11 no.12
• /
• pp.1299-1305
• /
• 2002

Thirty sediment samples of the <63${\mu}{\textrm}{m}$ fraction collected from the southwestern coast of Korea were analysed for their heavy metal (Fe, Mn, Cr, Co, Cu, Ni, Zn and Pb) concentration. The results show that sediment texture plays a controlling role on the total metal concentrations and their spatial distribution. A single lM HCl extraction procedure was used in order to assess the environmental risk of heavy metals in bottom sediments. The non-residual fraction was the most abundant pool for Mn and Pb in most samples, which means that this metals are highly avaliable in these sediments. Cr, Ni, Fe, Co, Zn and Cu were mainly associated with the residual fraction, suggesting that their concentrations are controlled significantly by transport processes with the fine particles as carriers from diffuse pollution source. Concentration enrichment ratios(CER) were calculated from the non-residual contents and their values allowed us to classify the sediments according to their environmental risk.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.236-241
• /
• 2000

In the present industry, there is not only the cutting of iron metal, but also the cutting of alloy aluminum, brass and plastic to wood(Paulownia). A variety of material is used and these industry is made need of the cutting material but lots of experiments processing is not enough at the moment. At this point, our team processed the basic experiment about influencing of cutting angle of bite concerned to manufacture in the turning of non-iron metal. Generally speaking, we recognized that there was occurrence of increase of rough surface with increasing of cutting angle in the non-iron metal. but in the cutting of wood we knew, there was special change with change of cutting angle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.241-241
• /
• 2010

New non-volatile memory with high density and high work-function metal nano-dots, MND (Metal Nano-Dot) memory, was proposed and fundamental characteristics of MND capacitor were evaluated. In this work, nano-dot layer of FePt with high density and high work-function (~5.2eV) was fabricated as a charge storage site in non-volatile memory, and its electrical characteristics were evaluated for the possibility of non-volatile memory in view of cell operation by Fowler-Nordheim (FN)-tunneling. Here, nano-dot FePt layer was controlled as a uniform single layer with dot size of under ~ 2nm and dot density of ${\sim}\;1.2{\times}10^{13}/cm^2$. Electrical measurements of MOS structure with FePt nano-dot layer shows threshold voltage window of ~ 6V using FN programming and erasing, which is satisfied with operation of the non-volatile memory. Furthermore, this structure provides better data retention characteristics compared to other metal dot materials with the similar dot density in our experiments. From these results, it is expected that this non-volatile memory using FePt nano-dot layer with high dot density and high work-function can be one of candidate structures for the future non-volatile memory.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_2
• /
• pp.199-208
• /
• 2022

The steel wire or steel bar processing process applied to the manufacture of various bolts and power transmission shafts was improved by applying in-line phosphate film treatment technology. By applying a polymer lubricant for a non-reactive metal forming process and a non-reactive non-phosphorus lubricating coating agent, the film formation for each process time was comparatively analyzed and reviewed. Compared to the nine processes applied previously, the in-line phosphate film treatment technology applied with only two processes has been effectively improved in terms of reduction of treatment time, reduction of facility installation area, prevention of water pollution due to wastewater, and non-use of ozone-depleting substances. In addition, it was found that it can have an important effect on productivity improvement and price competitiveness from the simplification of quality control and process control as well as improvement of the working environment.