• 드라이브 ㆍ 컨트롤
• /
• 제14권4호
• /
• pp.17-22
• /
• 2017

In this study, the back-drivability of the single-rod and double-rod type EHAs (Electro-Hydrostatic Actuators) was compared by computer simulation and experiments. The back-drivability of EHAs exhibit non-linear behavior like their force tracking performance. In case of the double-rod type EHA, the back-drivability was mostly influenced by the bulk modulus of oil that changes with the working pressure due to entrapped air. The back-drivability of the single-rod type EHA was directly affected by the operation states of its pilot-operated check valves, while the asymmetrical piston geometry and the non-linear bulk modulus of oil also made the dynamic response in building up the cylinder pressure dependent on the operating conditions.

• Interaction and multiscale mechanics
• /
• 제5권1호
• /
• pp.57-73
• /
• 2012

The paper presents the analysis of two groups of piles subjected to lateral loads incorporating the non-linear behaviour of soil. The finite element method is adopted for carrying out the parametric study of the pile groups. The pile is idealized as a one dimensional beam element, the pile cap as two dimensional plate elements and the soil as non-linear elastic springs using the p-y curves developed by Georgiadis et al. (1992). Two groups of piles, embedded in a cohesive soil, involving two and three piles in series and parallel arrangement thereof are considered. The response of the pile groups is found to be significantly affected by the parameters such as the spacing between the piles, the number of piles in a group and the orientation of the lateral load. The non-linear response of the system is, further, compared with the one by Chore et al. (2012) obtained by the analysis of a system to the present one, except that the soil is assumed to be linear elastic. From the comparison, it is observed that the non-linearity of soil is found to increase the top displacement of the pile group in the range of 66.4%-145.6%, while decreasing the fixed moments in the range of 2% to 20% and the positive moments in the range of 54% to 57%.

• Composites Research
• /
• 제18권2호
• /
• pp.30-37
• /
• 2005

본 논문에서는 평직구조를 갖는 성층권 비행선 기낭의 하중막재에 대한 비선형 유한요소 해석 결과를 기술하였다. 평직구조를 갖는 하중막재의 미세구조를 3차원적으로 구현하였고, Updated Lagrangian 방법을 사용하여 기하학적 비선형성을 고려하였다 계산결과, 큰 변형률에서 비선형해석으로부터 얻은 응력-변형률 곡선은 선형해석의 결과와 큰 차이를 보였다. 또한 응력-변형률 곡선으로부터 얻은 비선형 탄성계수 값은 선형 탄성계수보다 큰 값을 보였는데 그 차이는 섬유의 굴곡도가 작은 경우 더욱 두드러지게 나타났다

• 한국산학기술학회논문지
• /
• 제11권7호
• /
• pp.2661-2669
• /
• 2010

본 연구에서는 매트릭스가 손상된 적층복합판의 비선형 거동을 분석하기 위한 일차전단변형이론에 기초한 유한요소 정식을 유도하였다. Duan and Yao가 제안한 Matrix 균열의 강성 치환 방법을 적용하여 다방향 강성저하식을 구성하였다. 발생된 Matrix 균열은 탄성계수, 전단탄성계수 및 프아송비의 변화로 표현할 수 있으며, 이를 이용하여 판의 국부 강성 변화를 예측할 수 있다. 가정된 자연변형률 방법을 적용한 쉘요소를 이용하여 면내 및 전단잠김 현상이 발생하지 않았다. 적층복합판의 선형해석은 물론 비선형 해석결과들은 참고문헌의 결과들에 수렴되었다. 매트릭스가 손상된 적층복합판의 해석 결과들은 향후 연구에 비교자료로 활용될 수 있을 것이다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.206-211
• /
• 1999

The purpose of this study is to investigate the natural frequencies and mode shapes of beam-columns on the non-homogeneous foundaion. The beam model is based on the classical Bernoulli-Euler beam theory. The linear foundation modulus is chosen as the non-homogeneous foundation in this study . The differentidal equation goeverning free vibrations of such beam-columns subjected to axial load is derived and solved numerically for calculting the natural frquencies and mode shapes. In numerical fivekinds of end constraint are considered, and the lowest four natural frquencies and corresponding mode shape are obtained as the non-dimensional forms.

• Journal of Pharmaceutical Investigation
• /
• 제39권3호
• /
• pp.185-199
• /
• 2009

Using a strain-controlled rheometer [Advanced Rheometric Expansion System (ARES)], the steady shear flow properties and the dynamic viscoelastic properties of $Antiphlamine-S^{(R)}$ lotion have been measured at $20^{\circ}C$ (storage temperature) and $37^{\circ}C$ (body temperature). In this article, the temperature dependence of the linear viscoelastic behavior was firstly reported from the experimental data obtained from a temperature-sweep test. The steady shear flow behavior was secondly reported and then the effect of shear rate on this behavior was discussed in detail. In addition, several inelastic-viscoplastic flow models including a yield stress parameter were employed to make a quantitative evaluation of the steady shear flow behavior, and then the applicability of these models was examined by calculating the various material parameters. The angular frequency dependence of the linear viscoelastic behavior was nextly explained and quantitatively predicted using a fractional derivative model. Finally, the strain amplitude dependence of the dynamic viscoelastic behavior was discussed in full to elucidate a nonlinear rheological behavior in large amplitude oscillatory shear flow fields. Main findings obtained from this study can be summarized as follows : (1) The linear viscoelastic behavior is almostly independent of temperature over a temperature range of $15{\sim}40^{circ}C$. (2) The steady shear viscosity is sharply decreased as an increase in shear rate, demonstrating a pronounced Non-Newtonian shear-thinning flow behavior. (3) The shear stress tends to approach a limiting constant value as a decrease in shear rate, exhibiting an existence of a yield stress. (4) The Herschel-Bulkley, Mizrahi-Berk and Heinz-Casson models are all applicable and have an equivalent validity to quantitatively describe the steady shear flow behavior of $Antiphlamine-S^{(R)}$ lotion whereas both the Bingham and Casson models do not give a good applicability. (5) In small amplitude oscillatory shear flow fields, the storage modulus is always greater than the loss modulus over an entire range of angular frequencies tested and both moduli show a slight dependence on angular frequency. This means that the linear viscoelastic behavior of $Antiphlamine-S^{(R)}$ lotion is dominated by an elastic nature rather than a viscous feature and that a gel-like structure is present in this system. (6) In large amplitude oscillatory shear flow fields, the storage modulus shows a nonlinear strain-thinning behavior at strain amplitude range larger than 10 % while the loss modulus exhibits a weak strain-overshoot behavior up to a strain amplitude of 50 % beyond which followed by a decrease in loss modulus with an increase in strain amplitude. (7) At sufficiently large strain amplitude range (${\gamma}_0$>100 %), the loss modulus is found to be greater than the storage modulus, indicating that a viscous property becomes superior to an elastic character in large shear deformations.

• Journal of the Korean Wood Science and Technology
• /
• 제44권1호
• /
• pp.1-8
• /
• 2016

목재 데크재에 인위적인 결함인 구멍을 부여하고 이들의 성능평가를 위해 초음파 비파괴 시험법을 적용하였다. 구멍의 크기와 개수를 달리하여 각각에 대한 초음파 전달속도를 측정하고 탄성계수를 산정하여 그 영향을 비교분석하였다. 시험결과 구멍의 크기가 커짐에 따라 초음파 전달속도와 탄성계수는 감소하였으며 이들 상호간에는 직선상관관계를 보였다. 구멍의 크기가 증가하면 초음파의 전달 길이는 증가하며 이에 따라 초음파속도는 감소하였지만 구멍의 크기가 15 mm 이하로 작은 경우에는 구멍이 없는 부재에 비해 그 차이가 작게 나타났다. 구멍의 개수가 많아짐에 따라 초음파 전달속도와 탄성계수는 감소하였으며 이들 상호간에는 높은 직선상관관계를 보였다. 구멍의 개수가 3개인 경우 초음파속도는 약 3.5% 정도 감소한데 비하여 탄성계수는 27% 정도로 현저히 감소하여 더 큰 감소경향을 나타내었다. 이들의 결과로부터 구멍의 크기와 개수는 초음파 전달속도와 탄성계수에 영향을 미치며 구멍의 크기가 크고 개수가 많아질수록 그 영향은 더욱 커질 것으로 여겨진다. 또한 작은 결함의 탐지를 위해서는 초음파 전달속도에만 의지할 것이 아니라 여러 초음파 변수를 고려하여 적용하는 방법을 고려하여야 할 것으로 생각된다.

• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.35-41
• /
• 2014

PURPOSES : The dynamic modulus for a specimen can be determined by using either the non-destructed or destructed testing method. The Impact Resonance Testing (IRT) is the one of the non-destructed testing methods. The MTS has proved the source credibility and has the disadvantages which indicate the expensive equipment to operate and need a lot of manpower to manufacture the specimens because of the low repeatability with an experiment. To overcome these shortcomings from MTS, the objective of this paper is to compare the dynamic modulus obtained from IRT with MTS result and prove the source credibility. METHODS : The dynamic modulus obtained from IRT could be determined by using the Resonance Frequency (RF) from the Frequency Response Function (FRF) that derived from the Fourier Transform based on the Frequency Analysis of the Digital Signal Processing (DSP)(S. O. Oyadigi; 1985). The RF values are verified from the Coherence Function (CF). To estimate the error, the Root Mean Squared Error (RMSE) method could be used. RESULTS : The dynamic modulus data obtained from IRT have the maximum error of 8%, and RMSE of 2,000MPa compared to the dynamic modulus measured by the Dynamic Modulus Testing (DMT) of MTS testing machine. CONCLUSIONS : The IRT testing method needs the prediction model of the dynamic modulus for a Linear Visco-Elastic (LVE) specimen to improve the suitability.

• Structural Engineering and Mechanics
• /
• 제64권1호
• /
• pp.71-79
• /
• 2017

In this study, interaction of several interface cracks located between a functionally graded material (FGM) layer and an elastic layer under anti-plane deformation based on the distributed dislocation technique (DDT) is analyzed. The variation of the shear modulus of the functionally graded coating is modeled by an exponential and linear function along the thickness of the layer. The complex Fourier transform is applied to governing equation to derive a system of singular integral equations with Cauchy type kernel. These equations are solved by a numerical method to obtain the stress intensity factors (SIFs) at the crack tips. The effects of non-homogeneity parameters for exponentially and linearly form of shear modulus, the thickness of the layers and the length of crack on the SIFs for several interface cracks are investigated. The results reveal that the magnitude of SIFs decrease with increasing of FG parameter and thickness of FGM layer. The values of SIFs for FGM layer with exponential form is less than the linear form.

• Computers and Concrete
• /
• 제22권6호
• /
• pp.539-550
• /
• 2018

Concrete is highly non-linear material which is originating from the transition zone in the form of micro-cracks, governs material response under various loadings. In this paper, the constitutive models published by many researchers have been used to generate novel stiffness parameters and constitutive curves for concrete. Following such linear material formulations, where the energy is conservative during the curvature, and a nonlinear contribution to the concrete has been made and investigated. In which, nonlinear concrete elastic modulus modeling has been developed that is capable-of representing concrete elasticity for grades ranging from 10 to 140 MPa. Thus, covering the grades range of concrete up to the ultra-high strength concrete, and replacing many concrete models that are valid for narrow ranges of concrete strength grades. This has been followed by the introduction of the nonlinear Hooke's law for the concrete material through the replacement of the Young constant modulus with the nonlinear modulus. In addition, the concept of concrete elasticity index (${\varphi}$) has been proposed and this factor has been introduced to account for the degradation of concrete stiffness in compression under increased loading as well as the multi-stages micro-cracking behavior of concrete under uniaxial compression. Finally, a sub-routine artificial neural network model has been developed to capture the concrete behavior that has been introduced to facilitate the prediction of concrete properties under increased loading.