• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.2
• /
• pp.5-18
• /
• 2023

As a result of the survey on the emission status of fluorine-based chemicals in Korea, 13 kinds of substances, including hydrogen fluoride (91%) and perfluorocarbons (5%), were emitted in workplaces. By regional groups, about 98% was emitted in the Gyeongbuk, Gyeonggi and Chungcheong regions, and about 98% in three sectors of industry related to manufacture of electronic parts, chemicals and non-metallic mineral products. The detection status of PFOS and PFOA in domestic main rivers was continuously detected in the Nakdong River, the Geum River and the Anseong Stream estuary with high fluorine-related chemical emissions, and four sites of PFOS and two sites of PFOA were detected for the first time in 2021. PFOS and PFOA were continuously detected in relatively high concentrations in the rivers where there were many semiconductor and display related sectors of industry.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.3 s.120
• /
• pp.264-273
• /
• 2007

A smart panel with structural sensors and actuators for minimizing noise radiation or transmission is described in the paper with the concept of active structural acoustical control. The sensors and actuators are both quadratically shaped piezoelectric polyvinylidene fluoride(PVDF) Polymer films to implement a volume velocity sensor and uniform force actuator respectively. They are collocated on either side of the panel to take advantage of direct velocity feedback(DVFB) strategy, which can guarantee a robust stability and high performance as long as the sensor-actuator response is strictly positive real(SPR). However, the measured sensor-actuator response of the panel showed unexpected result with non-SPR property. In the paper, the reason of the non-SPR property is investigated by theoretical analysis, computer simulation and experimental verification. The investigation reveals that the arrangement of collocated piezoelectric PVDF sensor and actuator pair on a panel is not relevant to get a high feedback gain and good performance with DVFB strategy.

• Journal of Powder Materials
• /
• v.26 no.2
• /
• pp.119-125
• /
• 2019

Piezoelectric energy harvesting technology is attracting attention, as it can be used to convert more accessible mechanical energy resources to periodic electricity. Recent developments in the field of piezoelectric energy harvesters (PEHs) are associated with nanocomposites made from inorganic piezoelectric nanomaterials and organic elastomers. Here, we used the $BaTiO_3$ nanoparticles and piezoelectric poly(vinylidene fluoride) (PVDF) polymeric matrix to fabricate the nanocomposites-based PEH to improve the output performance of PEHs. The piezoelectric nanocomposite is produced by dispersing the inorganic piezo-ceramic nanoparticles inside an organic piezo-polymer and subsequently spin-coat it onto a metal plate. The fabricated organic-inorganic piezoelectric nanocomposite-based PEH harvested the output voltage of ~1.5 V and current signals of ~90 nA under repeated mechanical pushings: these values are compared to those of energy devices made from non-piezoelectric polydimethylsiloxane (PDMS) elastomers and supported by a multiphysics simulation software.

• Membrane Journal
• /
• v.22 no.2
• /
• pp.104-112
• /
• 2012

Chemically stable Polyvinylidene fluoride-hexa-fluoropropane (PVDF-HFP) copolymer asymmetric membranes were prepared by the conventional phase inversion process, using Dimethyacetamide (DMAc) as a solvent and water as a non-solvent. To control the pore size and porosity of the PVDF-HFP membranes, tetra-ethoxysilane (TEOS) was used as a pore-forming agent. The prepared membranes were characterized, using several analytical methods such as Fourier Transform Infrared spectroscopy (FTIR), Thermo-gravimetric analyzer (TGA), Field Emission Scanning Electronic Microscopy (FESEM). TEOS turned out to increase porosity and make homogeneous pores on the membranes. Depending on the composition of the dope solutions, the pore size was ranged from 0.1 to 1.0 ${\mu}m$. The flux of the PVDF-HFP membranes prepared by using TEOS as a pore forming agent was increased substantially without much decrease in the rejection. When 15 wt% PVDF-HFP solution was blended with 13 wt% TEOS solution at composition ratio of 70/30 in wt%, the water flux at 2 bars was about 2 $m^3/m^2day$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.228.1-228.1
• /
• 2016

기존 산업에서 많이 쓰여져오고 있는 저압 플라즈마에 비해 여러가지 장점을 지닌 대기압 플라즈마는 수년 전부터 많은 연구가 되어 왔으며 폭넓은 응용분야에 있어서 활발히 이용되고 있고, 특히 온도가 거의 상온과 비슷하다는 장점으로 대기압 저온 플라즈마는 바이오메디컬 분야에서 활발하게 응용되어지고 있다. 본 연구에서는 대기압 저온 플라즈마 젯 장치를 사용하여 치아 표면에 불소를 도포하고 법랑질 표면의 불소 원소를 검출함으로써 플라즈마가 치아표면 불소도포에 있어서 어떠한 효과가 있는지 정량적으로 비교분석하였다. 또한 대기압 플라즈마 젯 장치의 방전개시전압과 가스유량에 따른 플라즈마젯 길이의 변화 및 OES(Optical Emission Spectroscopy) 장치를 사용하여 플라즈마에 대한 광학적 진단을 진행하였다. 치아표면에서 검출된 불소량은 플라즈마를 사용했을때가 그렇지 않을때에 비해 더 높게 관찰 되었다.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.584-589
• /
• 2007

Polyvinylidene fluoride (PVDF) is a type of electroactive polymer which shows significant shape change when exposed to electric field. PVDF is generally used as a film sensor in non-destructive evaluation (NDE) of materials. In this study, however, its properties relevant to film actuator are considered. Since most of the electromechanical applications that use PVDF and its copolymers as actuators use their piezoelectric properties, only the piezoelectric properties of PVDF are discussed here. These properties depend mainly on the degree of crystallinity of PVDF. Available data from recent research publications are used to simulate the response of a PVDF bimorph beam on the application of electric field, by a commercial finite element analysis package ANSYS. Finally, the factors that affect mechanical behavior of PVDF bimorph beam are discussed.

• Korean Journal of Microbiology
• /
• v.29 no.3
• /
• pp.167-171
• /
• 1991

An intracellular protease from cells of Pseudomonas carboxydohydrogena grown on nutrient broth was purified to better than 95% homogeneity in five steps using azocaseine as a substrate. The molecular weight of the native enzyme was determined to be 125, 000. Sodium dodecyl sulfate-gel electrophoresis revealedat least two non-identical subunits of molecular weight 70, 000 and 56, 000. The enzyme activity was completely ingibited by phenylmethylsulfonyl fluoride and diisopropyl fluorophosphate. The enzyme was also inhibited by $Mg^{2+}$ , $Zn^{2+}$ , $Cd^{2+}$, $Cu^{2+}$ , and $Fe^{2+}$ , but was stimulated by iodoacetamide. Maximal reaction rate of the enzyme was observed at pH8.0 and 30.deg.C. The isoelectric point of the enzyme was found to be 7.5. The enzyme was unable to hydrolyze carbon monoxide dehydrogenase.

• Membrane and Water Treatment
• /
• v.10 no.5
• /
• pp.321-330
• /
• 2019

The objective of this study was to examine the recovery of the power plant cooling tower blowdown water (CTBD) by membrane distillation. The experiments were carried out using a flat plate poly vinylidene fluoride (PVDF) membrane with a pore diameter of $0.22{\mu}m$ by a direct contact membrane distillation unit (DCMD). The effects of operating parameters such as transmembrane temperature difference (${\Delta}T$), circulation rate and operating time on permeate flux and membrane fouling have been investigated. The results indicated that permeate flux increased with increasing ${\Delta}T$ and circulation rate. Whereas maximum permeate flux was determined as $47.4L/m^2{\cdot}h$ at ${\Delta}T$ of $50^{\circ}C$ for all short term experiments, minimum permeate flux was determined as $7.7L/m^2{\cdot}h$ at ${\Delta}T$ of $20^{\circ}C$. While $40^{\circ}C$ was determined as the optimum ${\Delta}T$ in long term experiments. Inorganic and non-volatile substances caused fouling in the membranes.

• Journal of Industrial Technology
• /
• v.43 no.1
• /
• pp.43-48
• /
• 2023

Spinel LiNi_0.5Mn_1.5O₄ (LNMO) has been considered as one of most promising cathode material, because of its low-cost and competitive energy density. However, 4.7V vs. Li/Li⁺ of high operating potential facilitates electrolyte degradation on cathode-electrolyte interface during charge-discharge process. In particular, commercial polyvinylidene fluoride (PVDF) is not sutaible for LNMO cathode binder because its weak van der waals force induces thick and non-uniform coverage on the cathode surface. In this review, we study high performance binders for LNMO cathode, which forms uniform coating layer to prevent direct contact between electrolyte and LNMO particle as well as modifying high quality cathode electrolyte interphase, improved cell performace.

• Journal of dental hygiene science
• /
• v.11 no.2
• /
• pp.69-76
• /
• 2011

The aim of this study was to compare the effects on the resistance to demineralization by the frequency and method of fluoride application in vitro. ninety-one human enamel specimens were embedded in acrylic resin with the labial surfaces exposes. The specimens were divided into 7 groups; (1) non-treated; (2) 1.23% APF gel 1 time; (3) 2% NaF sol 1 time; (4) 2% NaF sol iontophoresis 1 time; (5) 1.23% APF gel 4 time; (6) 2% NaF sol 4 time; (7) 2% NaF sol iontophoresis 4 time. All the groups were immersed in the remineralizing solution (RS) before baseline and divided into 7 test groups of 13 specimens each. All the specimens were exposed to a pH-cycling model which consisted of demineralization (6 hours) and remineralization (18 hours) for 5 days. The Vickers surface micro-hardness number of all the specimens was measured using microhardness tester and the specimen surfaces were observed by scanning electron microscope (SEM). The results were analyzed using one-way ANOVA followed a Tukey's multiple comparison at a significance level of 0.05. The group 7 showed higher level of microhardness after Fluoride application. The group 1 showed lowest level of microhardness but group 7 showed higher level of microhardness after pH-cycling model, there were significant differences between groups. After the modified pH-cycling, the 2% NaF solution with the iontophoresis group showed the best resistance to demineralization(p<0.05). These results were also confirmed by SEM. The fluoride iontophoresis method was the most effective of the regimens in increasing the acid resistance of the enamel.