• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.4
• /
• pp.849-857
• /
• 1998

The purpose of this study was to investigate whether fluoride-releasing pit and fissure sealant was more effective in preventing caries than conventional non-fluoride-releasing sealant. Specimens 8mm in diameter were made from sound bovine enamel. Fluoride-releasing pit and fissure sealant(Helioseal F, Vivadent, Schaan, Liechtenstein) and non-fluoride-releasing sealant(Helioseal, Vivadent, Schaan, Liechtenstein) were applied to the specimens and artificial caries was induced. Microhardness and the depth of the carious lesion was measured. The following results were obtained: 1. In group 2, sealed with fluoride-releasing sealant, there was a 58.4% decrease in microhardness. This was significantly less than the 84.4% decrease observed in group 1, sealed with non-fluoride-releasing sealant(p<0.01). 2. The average depth of the artificial carious lesion in group 2 was $30.1{\pm}9.8{\mu}m$. In group 1, sealed with non-fluoride-releasing sealant, the lesion was significantly deeper with an average depth of $58.5{\pm}4.9{\mu}m$(p<0.01). 3. Fluoride-releasing pit and fissure sealant was more anticariogenic compared to non-fluoride-releasing sealant.

• Journal of Environmental Health Sciences
• /
• v.31 no.6
• /
• pp.475-482
• /
• 2005

This study aimed to determine the fluoride intakes in 120 preschool children aged 3 to 6 residing in Jumunjin (community water fluoridation area) and Gangneung (non-fluoridation area). The parents were asked to collect 24-hour urine samples and to duplicate the samples of all the diets that their children ingested in the day of urine collection. The acid-diffusible fluoride in the food and non-carbonate beverages were isolated by the acid-diffusion technique and then measured with a fluoride electrode. The fluoride in carbonate beverages, drinking waters and urine samples were measured directly with a fluoride electrode. The geometric mean (geometric standard deviation) of daily fluoride intakes from all kinds of diet was 5.99 (2.27) $\mu$g/kg/day in the children in Gangneung and that of the children in Jumunjin was 18.36 (2.69). The amount of fluoride intake by food and drinking water in fluoridation area were significantly larger than that in non-fluoridation area but the statistical difference of fluoride intake by beverages between two areas was not observed. The GMs (GSDs) of daily fluoride excretion by urine of children in non-fluoridation area and in fluoridation area were 8.39 (1.73) and 18.62 (1.77) $\mu$g/kg/day, respectively. The correlation between fluoride intake from diet excluding beverage and urinary excretion was statistically significant. It is concluded that the amount of fluoride intake of children living in fluoridation area did not exceed the upper intake level to avoid the risk of dental fluorosis (2.2 mg/day in 4- to 8-year-olds) and urinary excretion of fluoride was good indicator of fluoride intake from diets.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.1
• /
• pp.113-122
• /
• 2012

Objectives : This study was carried out to investigate the caries resistant effect of fluoride by dental polishing prior to fluoride application in vitro. Methods : Artificial caries lesion was made on the surface of specimen enamel taken from cow's permanent cuspid on the part of labial surface after resin embedding and polishing. Artificial dental plaque was formed on the 72 dental specimen 25~45 VHN(Vickers Hardness Number) which were divided into three groups(fluoride varnish, APF gel, control) with dental polishing and without polishing respectively. Fluoride varnish and APF gel group with 20 second polishing or without polishing were immersed in the artificial saliva respectively. Control group with or without polishing were immersed in the artificial saliva. Results : 1. Significant difference was not found by fluoride varnish between polishing group and non polishing group (p>0.01). 1) polishing group. The changes of Vickers Hardness Number(VHN) were $14.49{\pm}13.73$. 2) non-polishing group. The changes of VHN were $11.67{\pm}5.39$. 2. Significant difference was not found by APF gel between polishing group and non polishing group (p>0.01). 1) polishing group. The changes of VHN were $8.48{\pm}8.37$. 2) non-polishing group. The changes of VHN were $5.32{\pm}2.59$. Conclusions : Showed no significant difference between polishing group and non-polishing group regardless of fluoride materials (fluoride varnish, APF gel).

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.06a
• /
• pp.286-288
• /
• 2005

This study was conducted to compare the fluoride concentrations in urine of preschool children aged 3${\sim}$6 years between residing in community water fluoridation area(Kwangju City) and non-fluoridation area(Sungnam City). The acid-diffusible fluoride in the urine and drinking water was isolated by the acid-diffusion technique and measured with a fluoride electrode. The mean daily fluoride excretion to urine of children residing in Kwangju and Sungnam were $1.27{\pm}0.75mgF^-$/g creatinine and $0.87{\pm}47 mgF^-$/g creatinine, respectively. It is concluded from this investigation that the $F^-$concentration in urine sample of kindergarten and drinking water of children living in Kwanju(fluoridated areas) were significantly higher than that of children living in Sungnam(non-fluoridated areas).

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.580-588
• /
• 2014

Fluoride use is the best and widespread method for dental caries prevention. The aim of this study was to investigate experience and recognition of fluoride for caries prevention focusing on majors in one university. Four hundred twenty-four university students were selected by convenience sampling with informed consent and answered the questionnaire by self recording type. The subjects except dental hygiene students knew about purpose of fluoride use (84.6%), over the count fluoride rinse (63.2%), fluoride toothpaste (61.5%), professional fluoride application (56.4%) and water fluoridation (43.6%). They experienced over the count fluoride rinse (67.5%), school fluoride rinse (45.3%), professional fluoride application (30.8%), fluoride toothpaste (28.2%) and water fluoridation (12.0%). The main information paths about fluoride were university lectures among dental hygiene students and internet and mass media, followed by nurse-teachers among non dental hygiene students. The ratios of intention to use fluoride were: 67.8% in dental hygiene, 34.9% in health, 51.4% in non-health in case of professional fluoride application for oneself, 93.1% in dental hygiene, 48.0% in health, 50.4% in non-health in case of professional fluoride application for their children, 79.0% in dental hygiene, 51.3% in health, 55.8% in non-health in case of water fluoridation. The subjects to experience and recognize fluoride for caries prevention had more positive intention to use fluoride. The answers of students majoring in health or medical care were not different from non-health, except dental hygiene. Dental professionals should try to let the public know about fluoride use for caries prevention through mass media and internet as well as individual education in dental clinics.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.4
• /
• pp.73-84
• /
• 1996

Fluoride was first introduced into the drinking water of residents of Grand Rapids, Michigan in 1945 for the prevention of dental caries. Ever since, growing numbers of communities favor fluoridation. Now, over 7000 communities in the United States are adding F(0.7~1.2ppm) to their drinking water. The most effective to prevent tooth decay is putting lower concentrated fluoride(F, 0.7~1.2ppm) into drinking water. However, exact fluoride injection amount have not been decided, because the research of the fluoride injection effect was insufficient. Therefore, after separating fluoridation and non-fluoridation into public water supplies, we investigated concentration of fluoride, alkalinity, Al, Ca, Mg, evaporation residuals in APT, domestic, commercial area. Then, we decided allowable concentration of fluoride, injection point of fluoride in water supply system, cost effectiveness.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1931-1938
• /
• 2021

Uranium ingot is produced by metallothermic reduction of uranium tetrafluoride using magnesium or calcium as reductant. Presence of oxygen containing compounds viz. uranyl fluoride and uranium oxide in the starting uranium fluoride has a significant effect on the firing time, final temperature of the charge, slag-metal separation and hence the metal recovery. As reported in the literature, the maximum tolerable limit for uranyl fluoride in the UF₄ is 2.5 wt% and limit for uranium oxide content is in the range 2-3 wt%. No theoretical or experimental basis is available till date for these limits. Analyses have been carried out in this study to understand the effect of UO₂F₂ concentration in the starting fluoride on the final temperature of the products and thus the reduction characteristics. UF₄ having uranyl fluoride concentration, less than as well as more than 2.5 wt%, have been investigated. Thermodynamic calculations have been carried out to arrive at a general expression for the final temperature attained by the products during calciothermic reduction of UF₄. Finally, an upper limit for the oxygen containing impurities has been estimated using the CaO-CaF₂ phase diagram.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2004.06a
• /
• pp.213-216
• /
• 2004

This work was based on the hypotheses that fingernail clippings can be used as a biomarker for the subchronic exposure to fluoride. This study was conducted to prove the hypotheses and fingernail clippings were collected form 120 preschool children aged $3{\sim}6$ residing in Jumunjin(community water fluoridation area) and Kangnung(non-fluoridation area). The acid-diffusible fluoride in the fingernail clipping was isolated by the acid-diffusion technique and measured with a fluoride electrode. The mean fingernail fluoride as the children's living area were 4.49ug/g(SD 2.43) to Jumunjin and 2.68ug/g(SD 1.13) to Kangnung. As would be expected, the fluoride concentration in fingernail clippings were significantly different between the two geographical groups(p<0.001) determined by t-test.

• Journal of the Korean earth science society
• /
• v.42 no.5
• /
• pp.556-570
• /
• 2021

This study presents the data analysis results of groundwater chemistry and the occurrence of fluoride in groundwater obtained from the groundwater quality monitoring network of Korea. The groundwater data were collected from the National Groundwater Information Center and censored for erratic values and charge balance (±10%). From the geochemical graphs and various ionic ratios, it was observed that the Ca-HCO₃ type was predominant in Korean groundwater. In addition, water-rock interaction was identified as a key chemical process controlling groundwater chemistry, while precipitation and evaporation were found to be less important. According to a non-parametric trend test, at p=0.05, the concentration of fluoride in groundwater did not increase significantly and only 4.3% of the total groundwater exceeded the Korean drinking water standard of 1.5 mg/L. However, student t-tests revealed that the fluoride concentrations were closely associated with the lithologies of tuff, granite porphyry, and metamorphic rocks showing distinctively high levels. This study enhances our understanding of groundwater chemical composition and major controlling factors of fluoride occurrence and distribution in Korean groundwater.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.4
• /
• pp.349-365
• /
• 2006

State of problem : A number of investigation about increase of surface area via various surface treatments and modification of surface constituent have been carried out. Purpose : The surface characteristics and stability of implants treated with anodic oxidation, fluoride ion incorporation, and groups treated with both methods were evaluated. Material and method : Specimens were divided into six groups, group 1 was the control group with machined surface implants, groups 2 and 3 were anodic oxidized implants (group 2 was treated with 1M $H_2SO_4$ and 185V, group 3 was treated with 0.25M $H_2SO_4$ and $H_3PO_4$ and 300V). Groups 4, 5 and 6 were treated with fluoride. Group 4 was machined implants treated with 0.1% HF, and groups 5 and 6 were groups 2 and 3 treated with 10% NaF respectively. Using variable methods, implant surface characteristics were observed, and the implant stability was evaluated on rabbit tibia at 0, 4, 8 and 12 weeks. Result : 1. In comparison of the surface characteristics of anodic oxidized groups, group 2 displayed delicate and uniform oxidation layer with small pore size containing Ti, C, O and showed mainly rutile, but group 3 displayed large pore size and irregular oxidation layer with many crators. 2. In comparison of the surface characteristics of fluoride treated groups 4, 5, 6 and non-fluoride treated groups 1, 2, 3, the configurations were similar but the fluoride treated groups displayed rougher surfaces and composition analysis revealed fluoride in groups 4, 5, 6. 3. The fluoride incorporated anodic oxidized groups showed the highest resonance frequency values and removal torque values, and the values decreased in the order of anodic oxidized groups, fluoride treated group, control group. 4. According to implant stability tests, group 2 and 3 showed significantly higher values than the control group (P<.05). The fluoride treated groups showed relatively higher values than the non fluoride treated groups and there were significant difference between group 4 and group 1 (P<.05). Conclusion : From the results above, it can be considered that the anodic oxidation method is an effective method to increase initial bone stability and osseointegration and fluoride containing implant surfaces enhance new bone formation. Implants containing both of these methods should increase osseointegration, and reduce the healing period.