• 한국환경농학회지
• /
• 제4권2호
• /
• pp.88-94
• /
• 1985

온산(溫山)공업단지 조성(造成)에 따른 토양(土壤)의 오염(汚染)가능성을 조사하기 위하여 1978년 3월부터 1979년 5월말까지 수차에 걸쳐 공업단지 주변의 전답(田畓), 과수원 및 야산(野山)의 토양시료에 대하여 중금속 원소의 농도를 분석한 결과는 다음과 같다. 1) 농경지통양 46개지점의 중금속 농도(풍건물(風乾物) 기준)는 비소 흔적${\sim}9.3ppm$, 카드뮴 흔적${\sim}$0.6 ppm, 구리4${\sim}$22ppm, 수은 흔적${\sim}$0.37ppm, 납 6${\sim}$43ppm, 아연 27${\sim}$93ppm으로서 전국(全國) 논토양의 분석치와 비교할 때 중금속의 오염은 전혀 인정할 수 없었다. 2) 중금속 함량을 논, 밭, 과수원의 토양별로 비교한 결과 As, Cd, Cu, Zn은 토양에 따라 유의차(有意差)가 없었으나 Hg, Pb는 유의차(有意差)가 있었다. 공단내(工團內) 리단위(里單位)지역에 따른 중금속 함량을 비교한 결과 As, Cd, Hg는 유의차(有意差)가 없었으나 Cu, Pb, Zn은 유의차(有意差)가 있었다. 3) 금속제련소 인접지역에서는 아연제련소(亞鉛製鍊所)의 시운전(試運轉)중 사고에 의하여 Cd, Pb, Zn으로 오염(汚染)된 지점이 여러곳 관찰되었으나 정상가동(正常稼動)에 들어간 이후에는 오염이 더 이상 진행되지 않았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.414-417
• /
• 2005

Single point diamond turning technique for optical crystals is studied in this paper. The main factors which are influential the machined surface quality are discovered and regularities of machining process are drawn. Optical crystals have found more and more important applications in the field of modern optics. Optical crystals are mostly brittle materials of poor machinability. The traditional machining method is polishing which has many shortcomings such as low production efficiency, poor ability to be automatically controlled and edge effect of the workpiece. The purpose of our research is to find the optimal machining conditions for ductile cutting of optical crystals and to apply the SPDT technique to the manufacturing of ultra precision optical components of brittle material(Ge). Many technical challenges are being tried for the large space infrared telescope, which is one of the major objectives of the National Strategic Technology Road Map (NSTRM).

• 대한임상독성학회지
• /
• 제2권2호
• /
• pp.67-71
• /
• 2004

Arsenic poisoning has three types of poisoning. First, acute arsenic poisoning is usually caused by oral intake of large amount of arsenic compound with purpose of homicide or suicide. Second, chronic arsenic poisoning is caused by inhalation of arsenic in the occupational setting or by long-term oral intake of arsenic-contaminated well water. Third, arsine poisoning occurs acutely when impurities of arsenic in non-ferrous metal react with acid. Clinical manifestation of acute arsenic poisoning is mainly gastrointestinal symptoms and cardiovascular collapse. Those of chronic poisoning are skin disorder and cancer. Arsine poisoning shows massive intravascular hemolysis and hemoglobinuria with acute renal failure. Exposure evaluation is done by analysis of arsenic in urine, blood, hair and nail. Species analysis of arsenic is very important to evaluate inorganic arsenic acid and mono methyl arsenic acid (MMA) separated from dimethyl arsenic acid (DMA) and trimethyl arsenic acid (TMA) which originate from sea weed and sea food. Treatment with dimercaprol (BAL) is effective in acute arsenic poisoning only.

• Asian Journal of Atmospheric Environment
• /
• 제4권1호
• /
• pp.9-19
• /
• 2010

The size distribution of airborne particulate matter (PM) and the concentrations of associated metallic elements were investigated in a busy urban region of a typical Korean industrial city. The PM concentrations measured during the spring, except for those in the size range of 1.1 to 2.1 ${\mu}m$, were slightly higher than the PM concentrations in the summer. Coarse particles contributed greatly to the variation in PM concentrations in the spring, while fine and submicron particles contributed largely to the variation in PM concentrations in the summer. The difference in size modes of the PM concentrations between spring and summer may be explained by the Asian dust effect and its accompanying wind direction and speed. Extremely high enrichment factors (EFs) values (6,971 to 60,966) for all of the size distributions in PM were identified for cadmium (Cd). High EFs values (12 to 907) were also identified for other heavy metals including Cr, Cu, Ni, Pb, Zn and Mn. Low EF values (0.29 to 8.61) were identified for Ca, K, Mg and Na. These results support the common hypothesis that most heavy metals in ambient PM have anthropogenic sources and most light metals have crustal sources. The results of principal components analyses and cluster analyses for heavy metals indicate that the principal sources of PM and metals were emissions from non-ferrous metal smelters, oil combustion, incinerators, vehicular traffic and road dust.

• 한국주조공학회지
• /
• 제32권5호
• /
• pp.231-240
• /
• 2012

In present study, the effect of heat treatment on the microstructure and mechanical properties of the gravity cast superchargers housing using A356 alloy were investigated. In order to identify the characteristics of superchagers housing casting with heat treatment, Vickers hardness test, electrical conductivity test, opical and scanning electron microscopy were performed. And also, to investigate their mechanical properties, the T6 treated superchagers housing casting in optimum heat treatment condition were carried out tensile test using UTM (Universal Testing Machine).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1112-1113
• /
• 2015

In the end of 2014, Changwon National University and TECHSTEEL Co., Ltd. had initiated a project on the development of a 300 kW-class HTS DC Induction Furnace(HTS DC IF) for preheating non-ferrous metal billets funded by the Korea Institute of Energy Technology Evaluation and Planning for 3 years. This is the one of the most realistic commercial machines applying the coated conductors. In this paper, the development progress of a 300 kW-class HTS DC IF was introduced. The major characteristics of the furnace including its capacity, structure and operation scheme were presented. For ensuring the successful design, a pre-validation study was performed through the electromagnetic, heat transfer and solid mechanical analysis using a multi-physics FEM tool. The aluminum billet was heated up to $540^{\circ}C$ under 1 T of the magnetic flux density at the center of the billet, and the simulation results were described in detail.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.179-180
• /
• 2012

Aluminum alloys are widely known as non-ferrous metal with light weight and high strength. Consequently, these materials take center stage in the aircraft and automobile industry. The Al7075 aluminum alloy is based on the Al-Zn-Mg-Cu and one of the strongest wrought aluminum alloys. Aluminum nitride has ten times higher thermal conductivity($319W/m{\cdot}K$) than Al2O3 and also has outstanding electric insulation($1{\times}1014{\Omega}{\cdot}cm$). Furthermore, it has high mechanical property (430 MPa) even though its co-efficient of thermal expansion is less than alumina For these reasons, it has great possibilities to be used for not only the field which needs high strength lightweight but also electronic material field because of its suitability to be applied to the insulator film of PCB or wafer of ceramic with high heat conduction. This paper investigates the mechanical properties and corrosion behavior of aluminum alloy Al7075 deposited with aluminum nitride thin films To improve the surface properties of Al7075 with respect to hardness, and resistance to corrosion, aluminum nitride thin films have been deposited by pulsed DC reactive magnetron sputtering. The pulsed DC power provides arc-free deposition of insulating films.

• 산업경영시스템학회지
• /
• 제46권4호
• /
• pp.107-115
• /
• 2023

Mid-sized manufacturing companies, which account for 0.7%(5,480 companies), 13.8%(1.169 million persons) of total employment, and 15.7% of total sales, have recently experienced a lot of difficulties in management activities due to the impact of COVID-19, the U.S.-China trade war, and the collapse of global supply chains. To overcome this, revitalization of quality management activities to strengthen corporate competitiveness is emerging as an urgent task. In order for these quality management activities to achieve their intended purpose, the positive leadership of corporate managers is very important above all else. There have been many studies related to positive leadership, but most have focused on charismatic leadership and transformational leadership centered on large companies or small and medium-sized enterprises. Therefore, this study aims to present ways to strengthen the leadership of managers by empirically analyzing how the positive leadership of managers of mid-sized manufacturing companies, which was relatively under-researched, affects quality management activities and Business performance(Balanced Score Card; BSC).

• Asian Journal of Atmospheric Environment
• /
• 제6권2호
• /
• pp.83-95
• /
• 2012

China has been a top producer and exporter of refined lead products in the world since the year 2000. After the phasing-out of leaded gasoline in the late 1990s, non-ferrous metallurgy and coal combustion have been identified as potential major sources of aerosol lead in China. This paper presents the single particle analytical results of ambient aerosol particles collected near a lead smelter using a scanning electron microscopy- energy dispersive x-ray spectroscopy (SEM-EDX). Aerosol particle samples were collected over a 24-hour period, starting from 8 pm on 31 May 2002, using a high volume TSP sampler. For this near source sample, 73 particles among 377 particles analyzed (accounting for 19.4%) were lead-containing particles mixed with other species (S, Cl, K, Ca, and/or C), which probably appeared to be from a nearby lead smelter. Lead-containing particles of less than $2{\mu}m$ size in the near source sample were most frequently encountered with the relative abundances of 42%. SEM-EDX analysis of individual standard particles, such as PbO, PbS, $PbSO_4$, $PbCl_2$, and $PbCO_3$, was also performed to assist in the clear identification of lead-containing aerosol particles. Lead-containing particles were frequently associated with arsenic and zinc, indicating that the smelter had emitted those species during the non-ferrous metallurgical process. The frequently encountered particles following the lead-containing particles were mineral dust particles, such as aluminosilicates (denoted as AlSi), $SiO_2$, and $CaCO_3$. Nitrate- and sulfate-containing particles were encountered frequently in $2-4{\mu}m$ size range, and existed mostly in the forms of $Ca(NO_3,SO_4)/C$, $(Mg,Ca)SO_4/C$, and $AlSi+(NO_3,SO_4)$. Particles containing metals (e.g., Fe, Cu, and As) in this near source sample had relative abundances of approximately 10%. Although the airborne particles collected near the lead smelter contained elevated levels of lead, other types of particles, such as $CaCO_3$-containing, carbonaceous, metal-containing, nitrates, sulfates, and fly-ash particles, showed the unique signatures of samples influenced by emissions from the lead smelter.

• 대한조선학회논문집
• /
• 제51권6호
• /
• pp.548-555
• /
• 2014

As a considerable, experimental approach, an Auto-carriage type of $CO_2$ welding machine and a MIG(Metal Inert Gas) welding robot under inert gas atmosphere were utilized in order to realize Al 5083 welding applied to hull and relevant components of green Al leisure ships. This study aims at investigating the effect of welding conditions(current, voltage, welding speed, etc) on thermal deformation that occurs as welding operation and tensile characteristics after welding, by using Al 5083, non-ferrous material, applied to manufacturing of co-environmental Al leisure ships. With respect to welding condition to minimize the thermal deformation, 150A and 16V at the wire-feed rate of 6mm/sec were acquired in the process of welding Al 5083 through an auto carriage type of $CO_2$ welding feeder. As to tensile characteristics of Al 5083 welding through a MIG welding robot, most of tensile specimens showed the fracture behavior on HAZ(Heat Affected Zone) located at the area joined with weld metal, except for some cases. Especially, for the case of the Al specimen with 5mm thickness, 284.62MPa of tensile strength and 11.41% of elongation were obtained as an actual allowable tensile stress-strain value. Mostly, after acquiring the optimum welding condition, the relevant welding data and technical requirements might be provided for actual welding operation site and welding procedure specification(WPS).