• 한국환경농학회지
• /
• 제5권1호
• /
• pp.43-47
• /
• 1986

온산(溫山)공업단지 조성(造成)에 따른 농작물(農作物)의 오염(汚染)가능성을 조사하기 위하여 1978년 3월부터 12월에 걸쳐 주변 농경지에서 재배된 농작물(農作物)(수도, 보리, 대두, 채소, 과일)중의 중금속 농도를 분석한 결과는 다음과 같다. 중금속 함량은 농작물의 종류, 부위, 재배지역에 따라 약간의 차이가 있었으나 일정한 경향은 찾아 볼 수 없었다. 분석한 농작물 시료의 평균치(平均値)를 보면(풍건물(風乾物)기준) As 0.23 ppm, Cd 0.46 ppm, Cu 4.88 ppm, Hg 0.09 ppm, Pb 3.86 ppm, Zn 41.3 ppm으로서 이 지역에 대한 자연함유량(自然含有量) 기준(基準)으로 이용할 수 있을 것이다.

• 한국재난정보학회:학술대회논문집
• /
• 한국재난정보학회 2016년 정기학술대회
• /
• pp.271-274
• /
• 2016

본 논문에서는 오존층 파괴 및 지구 온난화에 악영향을 미치는 할로겐화합물 소화약제를 대체하여 개발된 청정소화약제인 할로겐화합물 청정소화약제(Halocarbon clean agent)의 열분해 생성물(thermal decomposition products)의 영향에 평가하고자 한다. 이를 위해 할로겐화합물 청정소화약제인 HFC-125가 화원 크기의 변화에 따른 열분해 생성물의 미치는 영향을 측정하기 위해 소화시험을 실시하였고 금속(철), 비철금속(구리), 유리 시편의 부식성과 전자부품(SD-Card) 작동여부를 평가 하였다. 금속 및 비철금속 시편의 부식성을 측정하기 위해 디지털 카메라를 통해 이미지를 촬영하고 그래픽 편집 소프트웨어를 이용하여 채도(saturation)를 측정하여 부식성의 정도를 분석하였다. 금속, 비철금소, 유리 시편의 부식성 분석 결과, 화원의 크기가 증가할수록 금속 및 비철금속의 부식성이 증가하였다. 즉, 화원의 크기(fire size)에 따라 열분해 생성물질도 증가하여 금속 및 비철금속의 부식을 증가시키는 것으로 사료된다.

• Steel and Composite Structures
• /
• 제19권3호
• /
• pp.601-614
• /
• 2015

The Metal Magnetic Memory (MMM) method is a non-destructive testing method based on an analysis of the self-magnetic leakage field distribution on the surface of a component. It is used for determining the stress concentration zones or any irregularities on the surface or inside the components fabricated from ferrous-based materials. Thus, this paper presents the MMM signal behaviour due to the application of fatigue loading. A series of MMM data measurements were performed to obtain the magnetic leakage signal characteristics at the elastic, pre-crack and crack propagation regions that might be caused by residual stresses when cyclic loadings were applied onto the A283 Grade C steel specimens. It was found that the MMM method was able to detect the defects that occurred in the specimens. In addition, a justification of the Self Magnetic Flux Leakage patterns is discussed for demonstrating the effectiveness of this method in assessing the A283 Grade C steel under cyclic loadings.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.139-141
• /
• 2003

Multiple CeO$_2$/YSZ/Y$_2$O$_3$buffer layers, and subsequent YBCO films were deposited on the biaxially textured pure Ni and Ni ＋ 3at％W substrates using pulsed laser deposition. The deposition conditions of buffer layers on Ni and NiW were studied and compared. Good biaxial textures of buffer layers have been obtained on both substrates. The Jc's of YBCO films on these metal substrates were greater than 1$\times$10$^{6}$ A/$\textrm{cm}^2$ at 77K, 0T.

• Journal of Welding and Joining
• /
• 제32권4호
• /
• pp.10-14
• /
• 2014

Laser aided Direct Metal Tooling(DMT) process is a kind of Additive Manufacturing processes (or 3D-Printing processes), which is developed for using various commercial steel powders such as P20, P21, SUS420, H13, D2 and other non-ferrous metal powders, aluminum alloys, titanium alloys, copper alloys and so on. The DMT process is a versatile process which can be applied to various fields like the mold industry, the medical industry, and the defense industry. Among of them, the application of DMT process to the mold industry is one of the most attractive and practical applications since the conformal cooling channel core of injection molds can be fabricated at the slightly expensive cost by using the hybrid fabrication method of DMT technology compared to the part fabricated with the machining technology. The main objectives of this study are to provide various characteristics of the parts made by DMT process compared to the same parts machined from bulk materials and prove the performance of the injection mold equipped with the conformal cooling channel core which is fabricated by the hybrid method of DMT process.

• Applied Microscopy
• /
• 제29권3호
• /
• pp.323-329
• /
• 1999

본 연구에서는 Al과 $UO_2$의 나노미터 크기의 무기물 입자를 합성하기 위하여 생체 시스템인 철단백질 ferritin을 이용하였다. Ferritin에서 합성된 Al과 $UO_2$의 무기물 입자를 TEM을 이용하여 관찰한 결과, 단백질 내부에 나노미터 크기의 구형인 미네랄(mineral) core를 확인하였다. 그 입자들에 대한 EDXA분석 결과 각각 Al과 $UO_2$로 구성된 미네랄임을 확인하였다. Ferritin을 이용하여 합성된 Al core는 이번 연구에서 처음으로 전자현미경으로 관찰되었다. 그리고 두 종류의 다른 금속 즉, Al/Fe및 $UO_2/Al$의 존재하에 ferritin core를 합성하여 TTM을 관찰한 결과, 역시 나노미터 크기의 구형인 전자밀도 core를 관찰하였고 EDXA분석 결과 구형인 core가 합성시킨 두 금속 원소의 미네랄로 구성되어 있음을 증명하였다. 그리하여 본 연구는 철단백질을 이용하여 철이 아닌 Al과 $UO_2$로 구성된 나노미터 크기의 무기물 입자를 합성할 수 있음을 증명하였다.

• 한국기계가공학회지
• /
• 제14권2호
• /
• pp.38-43
• /
• 2015

Tungsten inert gas (TIG) welding is commonly used in industries that require airtightness, watertightness, oiltightness, and precision. It is a non-consumable welding method that is commonly used for the welding of non-ferrous metals, but it can be used to weld most metals. The methods of TIG welding can be divided into three types. The first, manual welding is done directly on the metal by a welder with a torch. The second, semi-automatic welding, gets help from a material supplying machine, but it is conducted by a welder. Lastly, automated welding is conducted fully by a machine during its process and operation. Depending on the selection of electrode, the amount of heat that is applied to the base material and the electrode rod changes and makes the shape of welded parts different. A direct-current positive electrode was used for this study. Through the change of shielding gas type on a structural steel (SS-400) that is commonly used in industry, the composition and shape changes in welded parts were detected after welding. The heat-affected area, hardness value, and tensile strength were also identified through hardness testing and tensile testing. In this study, it was found that the higher hardness value of the heat-affected is, the weaker the tensile strength becomes.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.9-14
• /
• 2015

The Direct Metal Tooling (DMT) process is a kind of additive manufacturing processes, which is developed using various commercial steel powders, such as P20, P21, SUS420, and other non-ferrous metal powders. The DMT process is a versatile process that can be applied to various fields, such as the molding industry, the medical industry, and the defense industry. Among them, the application of the DMT process to the molding industry is one of its most attractive and practical applications, since the conformal cooling channel cores of injection molds can be fabricated at a slightly expensive cost by using the hybrid fabrication method of DMT technology compared with parts fabricated with machining technology. The main objectives of this study are to provide various characteristics of the parts made using the DMT process compared with the same parts machined from bulk materials and evaluate the performance of the injection mold equipped with a conformal cooling channel core fabricated using the hybrid method of the DMT process.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1190-1199
• /
• 2014

As a considerable, experimental approach, an autocarriage type of $CO_2$ welding machine and a MIG(metal inert gas) welding robot in the inert gas atmosphere were utilized in order to realize Al 5083 welding to hull and relevant components of green leisure ships. This study aims at investigating the effect of welding conditions(current, voltage, welding speed, etc.) on thermal deformation that occurs as welding operation and tensile characteristics after welding, by using Al 5083, nonferrous material, applied to manufacturing of eco-environmental leisure ships. With respect to welding condition to minimize the thermal deformation, 150 A and 16 V at the wire-feed rate of 6 mm/sec were acquired in the process of welding Al 5083 through an auto carriage type of $CO_2$ welding feeder. As to tensile characteristics of Al 5083 welding through a MIG welding robot, most of tensile specimens showed the fracture behavior on HAZ(heat affected zone) located at the area joined with weld metal, except for some cases. Especially, for the case of the Al specimen with 5 mm thickness, 284.62 MPa of tensile strength and 11.41 % of elongation were obtained as an actual allowable tensile stress-strain value. Mostly, after acquiring the optimum welding condition, the relevant welding data and technical requirements might be provided for actual welding operation site and welding procedure specification (WPS).

• 대한임상검사과학회지
• /
• 제54권4호
• /
• pp.298-306
• /
• 2022

본 연구는 배양 C6 glioma 세포를 재료로 파킨슨병의 유발 물질인 황산철(FeSO₄)의 신경독성과 이에 대한 물매화(Parnassia palustria L., PP) 추출물의 영향을 조사하였다. 이를 위하여 세포생존율을 비롯한 슈퍼뮤타제(SOD)-유사능 및 과산소음이온 라디칼(SAR)-소거능과 같은 항산화 효과를 분석하였다. 본 연구에서 FeSO₄는 처리농도에 비례하여 세포생존율을 유의하게 감소시켰으며, 이 과정에서 XTT₅₀값이 63.3 μM로 나타나 Borenfreund and Puerner의 독성판정기준에 따라 고독성 (highly-toxic)인 것으로 나타났다. 또한, 항산화제의 일종인 quercetin은 FeSO₄의 독성으로 손상된 세포생존율을 유의하게 증가시켰다. 한편, PP 추출물은 FeSO₄만을 처리한 것에 비하여 세포생존율을 유의하게 증가시켰으며, 동시에 SOD-유사 능과 SAR-소거능과 같은 항산화능을 나타냈다. 이상의 결과로부터, FeSO₄의 세포독성에 산화적 손상이 관여하고 있으며, PP추출물은 항산화 효과에 의하여 FeSO₄에 의한 세포독성을 효과적으로 방어하였다. 결론적으로, 물매화 추출물과 같은 천연물은 FeSO₄와 같이 산화적 손상과 관련된 질환을 유발시키는 중금속화합물에 의한 독성을 개선 내지는 치료하는데 유용한 소재라고 생각된다.