• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.401-409
• /
• 2023

This study compared and analyzed the performance of a distributed area search algorithm and a distributed probability search algorithm based on information exchange between ships. The distributed algorithm is a method that can search for an optimal avoidance route based on information exchange between ships. In the distributed area search algorithm, only a ship with the maximum cost reduction among neighboring ships has priority, so the next expected location can be changed. The distributed stochastic search algorithm allows a non-optimal value to be searched with a certain probability so that a new value can be searched. A circular-based ship collision avoidance model was used for the ship-to-ship collision avoidance experiment. The experimental method simulated the distributed area search algorithm and the distributed stochastic search algorithm while increasing the number of ships from 2 to 50 that were the same distance from the center of the circle. The calculation time required for each algorithm, sailing distance, and number of message exchanges were compared and analyzed. As a result of the experiment, the DSSA(Distributed Stochastic Search Algorithm) recorded a 25%calculation time, 88% navigation distance, and 84% of number of message exchange rate compared to DLSA.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.493-500
• /
• 2021

In this paper, we propose the development of deep learning structure to improve quality of polygonal containers. The deep learning structure consists of a convolution layer, a bottleneck layer, a fully connect layer, and a softmax layer. The convolution layer is a layer that obtains a feature image by performing a convolution 3x3 operation on the input image or the feature image of the previous layer with several feature filters. The bottleneck layer selects only the optimal features among the features on the feature image extracted through the convolution layer, reduces the channel to a convolution 1x1 ReLU, and performs a convolution 3x3 ReLU. The global average pooling operation performed after going through the bottleneck layer reduces the size of the feature image by selecting only the optimal features among the features of the feature image extracted through the convolution layer. The fully connect layer outputs the output data through 6 fully connect layers. The softmax layer multiplies and multiplies the value between the value of the input layer node and the target node to be calculated, and converts it into a value between 0 and 1 through an activation function. After the learning is completed, the recognition process classifies non-circular glass bottles by performing image acquisition using a camera, measuring position detection, and non-circular glass bottle classification using deep learning as in the learning process. In order to evaluate the performance of the deep learning structure to improve quality of polygonal containers, as a result of an experiment at an authorized testing institute, it was calculated to be at the same level as the world's highest level with 99% good/defective discrimination accuracy. Inspection time averaged 1.7 seconds, which was calculated within the operating time standards of production processes using non-circular machine vision systems. Therefore, the effectiveness of the performance of the deep learning structure to improve quality of polygonal containers proposed in this paper was proven.

• Journal of the Korean Chemical Society
• /
• v.68 no.5
• /
• pp.259-273
• /
• 2024

This study aimed to investigate changes in metamodeling recognition among chemistry teachers through a teacher educational program related to redox models and water electrolysis experiments. To this end, a science model education program was developed for 9 chemistry teachers and conducted over 10 lessons for a total of 40 hours. In addition, a pre- and post-survey was administered to determine teachers' metamodeling recognition in non-contextual and contextual situations. As a result of the study, through the science model education program, teachers showed educational effects in both non-contextual and contextual situations. In the case of non-contextual situations, the stages of scientific metamodeling knowledge development of chemistry teachers came out differently depending on the type of question. For example, the nature or purpose of the model, the modeling process, or the evaluation and improvement of the model improved from low to high, but there was no significant change because the perception of model change and diversity was already high in advance. In the case of contextual situations, the stage of scientific metamodeling knowledge development improved from objectivity to subjectivity in both the redox model theory class and the water electrolysis model experiment class. Therefore, through the 5E circular learning model-based education program, chemistry teachers' perception of metamodeling was clearly improved. However, the modeling activities of teachers in the water electrolysis model experiment class were different from the change in metamodeling perception. The types that teachers selected as additional experiments for modeling were analyzed in two ways. The first type is when they are interested in finding an ideal condition in which the ratio of hydrogen and oxygen gas is close to 2:1 through additional experiments. The second type is when additional experiments are designed with interest in why the experimental results are coming out like that. It was analyzed that the second type was the experiment necessary for modeling. In addition, modeling activities were analyzed into two types. The first was a type in which water molecules were directly decomposed in two electrodes to generate hydrogen and oxygen gas. This type was the case of regression to the textbook model regardless of the experimental results, and 6 chemistry teachers out of 8 were analyzed as this type. The second type was the type in which water reacted at the (+) electrode to generate other substances, and hydrogen ions reacted at the (-) electrode to generate hydrogen gas. Teachers who performed these modeling activities corresponded to the second type in additional experiments, and 2 chemistry teachers out of 8 corresponded to this. Therefore, it is necessary to provide an experience of activities corresponding to the second type of experiment and modeling through an educational program that provides an experience of directly modeling through experiments in order to develop modeling capabilities, unlike the development of metamodeling knowledge.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.3
• /
• pp.156-162
• /
• 2007

The parallel beam SPECT system acquires projection data by using collimators in conjunction with photon detectors. The projection data of the parallel beam SPECT system is, however, blurred by the point response function of the collimator that is used to define the range of directions where photons can be detected. By increasing the number of parallel holes per unit area in collimator, one can reduce such blurring effect. This approach also, however, has the blurring problem if the distance between the object and the collimator becomes large. In this paper we consider correction methods for artifacts caused by non-circular orbit of parallel beam SPECT with many parallel holes per detector cell. To do so, we model the relationship between the object and its projection data as a linear system, and propose an iterative reconstruction method including artifacts correction. We compute the projector and the backprojector, which are required in iterative method, as a sum of convolutions with distance-dependent point response functions instead of matrix form, where those functions are analytically computed from a single function. By doing so, we dramatically reduce the computation time and memory required for the generation of the projector and the backprojector. We conducted several simulation studies to compare the performance of the proposed method with that of conventional Fourier method. The result shows that the proposed method outperforms Fourier methods objectively and subjectively.

• Korean Journal of Microbiology
• /
• v.54 no.4
• /
• pp.448-452
• /
• 2018

The full genome sequence of Bacillus safensis KCTC 12796BP which had been isolated from the marine sponge in the seawater of Jeju Island, was determined by Pac-Bio next-generation sequencing system. A circular chromosome in the length of 3,935,874 bp was obtained in addition to a circular form of plasmid having 36,690 bp. The G + C content of chromosome was 41.4%, and that of plasmid was 37.3%. The number of deduced CDSs in the chromosome was 3,980, whereas 36 CDS regions were determined in a plasmid. Among the deduced CDSs in chromosome, 81 tRNA genes and 24 rRNA genes in addition to one tmRNA were allocated. More than 30 CDSs for sporulation, 16 CDSs for spore coat, and 20 CDSs for germination were also assigned in the chromosome. Several genes for capsular polysaccharide biosynthesis and for flagella biosynthesis and chemotaxis in addition to genes for osmotic tolerance through glycine-choline betaine pathway were also identified. Above all, the biosynthetic gene cluster for anti-allergic compounds seongsanamides were found among two non-ribosomal peptide synthetase (NRPS) gene clusters for secondary metabolites.

• YAKHAK HOEJI
• /
• v.38 no.2
• /
• pp.149-157
• /
• 1994

The role of nitric oxide(NO) as neurotransmitter in non-adrenergic non-cholinergic (NANC) relaxation induced by electrical stimulation has been studied in circular muscle strips of the rabbit gastric fundus. In the presence of atropine and guanethidine, low frequency$(1{\sim}20\;Hz)$ and short trains (5s) of electrical stimulation induced the frequency-dependent relaxations which were not affected by adrenergic and cholinergic blockage, but abolished by tetrodotoxin, a nerve conductance blocker. L-NNA, a stereospecific inhibitor of NO biosynthesis, inhibited the relaxations induced by electrical stimulation but not affected the relaxation to exogenous NO. The effect of L-NNA was prevented by L-arginine, the precursor of the NO biosynthesis, but not by its enantiomer, D-arginine. Exogenous administration of NO$(10{\sim}100\;{\mu}M)$ caused the concentration-dependent relaxation which showed a similarity to those obtained with electrical stimulation. Hemoglobin, a NO scavenger, abolished the NO-induced relaxations and also markedly inhibited those evoked by electrical stimulation. Application of adenosine triphosphate$(1{\sim}10\;{\mu}M)$ induced concentration-independent contractions, but in high dose caused temporary contraction followed by relaxation which was not affected by L-NNA. Exogenous vasoactive intestinal polypeptide$(10{\sim}100\;nM)$ induced the concentration-dependent relaxation, while its effects were slower in onset and more persistent than those induced by short trains and low frequencies of electrical stimulation. Based on above results, it is suggested that NO is the principal neurotransmitter of NANC nerve at relaxation induced by short trains and low frequencies of electrical stimulation in the rabbit gastric fundus.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.66.1-66.1
• /
• 2015

Plasma medicine is an upcoming research area that has attracted the scientists to explore more deeply the utility of plasma. So, apart from the treating biomaterials and tissues with plasma, we have studied the effect of plasma with different feeding gases on modification of biomolecules. Additionally, we have checked the action of nanosecond pulsed plasma on the biomolecules. We have checked the plasma action on proteins ((Hemoglobin (Hb) Myoglobin (Mb) and lysoenzyme), calf thymus DNA and amino acids. The structural changes or structural modification of proteins and DNA have been studied using circular dichroism (CD), dynamic light scattering (DLS), gel electrophoresis, protein oxidation test, UV-vis spectroscopy and 1D NMR, while Liquid Chromatograph/Capillary Electrophoresis-Mass Spectrometer(LC/CE-MS) based qualitative bio-analysis have been used to study the modification of amino acids. We have also shown the effect of NaCl and ionic liquid on the formation of OH radicals using electron spin resonance and fluorescence techinques.

• Research in Plant Disease
• /
• v.26 no.3
• /
• pp.190-193
• /
• 2020

In 2014, Anthracnose symptoms were observed on fruit of pumpkin in Gangneung, Gangwon in Korea. The typical symptoms on fruit surfaces were circular lesions, brown, shriveled with salmon-colored spore masses on the spots. A fungal isolate was obtained from symptomatic on fruit and cultured on potato dextrose agar at 25℃. The color of the upper surface of the colony varied from white to gray with occurrence of salmon-colored conidial masses and was red to violet on the underside. The causal fungus of anthracnose isolated from the diseased fruits was identified as Colletotrichum fioriniae based on mycological characteristics and sequences of the internal transcribed spacer, glyceraldehyde-3-phosphate dehydrogenase, chitin synthase-1 gene, histone H3, actin gene, beta-tubulin gene region. Pathogenicity tests of the isolate were performed on pumpkin fruit by both wound and non-wound inoculation with conidial suspension (1×10⁶ conidia/ml) and incubated at 25℃. Lesions were observed on both wounded and non-wounded fruit of pumpkin after 7 days inoculation in only C. fioriniae. The pathogen was re-isolated from the lesions of inoculated fruits. To our knowledge, this is the first report of anthracnose on fruit of pumpkin caused by C. fioriniae in Korea.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.4 s.37
• /
• pp.691-700
• /
• 1998

Based on Von Karman-Donnell kinematic assumptions for laminated shells, the nonlinear vibration behaviour of antisymmetrically or asymmetrically laminated cross-ply circular cylindrical shells with clamped and simply-supported ends are studied by a multi-mode approach. A equation is formulated and satisfies the associated compatibility equation and all boundary conditions. The displacement function is assumed to take the form of the lowest linear vibration mode and to satisfy continuity of the circumferential displacement. The nonlinear vibration equation is derived by the Galerkin's method. And nonlinear frequency is obtained by using the harmonic balance method as a function of lamination parameters, material constants, aspect ratio and amplitude of vibration. The effect of initial imperfection is also included. Results of the non-linear vibration are presented for different amplitudes of initial imperfection and four sets of boundary conditions. Present results are compared well with existing analysis results.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.412-424
• /
• 2004

Statement of problem: Several prosthetic options are available for the restoration of multiple adjacent implants. A passively fitting prosthesis has been considered a prerequisite for the success and maintenance of osseointegration. Passivity is a particular concern with multiple implants because of documented inaccuracies in the casting and soldering process. One way to avoid this problem is to restore the implants individually, however, the restorations of individual adjacent impants requires careful adjustment of interproximal contacts. Purpose: The purpose of this study was to compare the stress distribution pattern and amount surrounding Bicon implants with individual crowns and splinted restorations. Material and method: A photoelastic model of a human partially edentulous left mandible with 3 Bicon implants($4{\times}11mm$) was fabricated. For non-splinted restorations, individual crowns were fabricated on 3 abutments ($4{\times}0.65mm,\;0^{\circ}$, 2.0 mm post, Bicon Inc., Boston, USA) After the units were cemented, 4 levels of interproximal contact tightness were evaluated: open, ideal ($8{\mu}m$ shim stock drags without tearing), medium($40{\mu}m)$), and heavy($80{\mu}m$). Splinted 3-unit fixed partial dentures were fabricated and cemented to the model. Changes in stress distribution under simulated non-loaded and loaded conditions(7.5, 15, 30 lb) were analyzed with a circular polaricope. Results: 1. Stresses were distributed around the entire body of fin in Bicon implants. 2. Splinted restorations were useful for distribution of stress around implants especially with higher loads. 3. By increasing the contact tightness between the individually restored three implants, the stress increased in the coronal portion of implants. Conclusions: Ideal adjustment of the contact tightness was important to reduce the stresses around individually restored Bicon implants.