• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.2
• /
• pp.128-135
• /
• 2003

Statement of problem : Implant screw loosening remains a problem in implant prosthodontics. Some abutment screws with treated surfaces were introduced to prevent screw loosening and to increase preload. DLC(Diamond Like Carbon) film has similar properties on hardness, wear resistance, chemical stability, biocompatibility as real diamond materials. Purpose : The purpose of this study was to investigate the effect of lubricant layer on abutment screw and to discriminate more effective method between soft lubricant and hard lubricant to prevent screw loosening. Material and method : In this study, $1{\mu}m$ thickness DLC was used as protective, lubricating layer of titanium screws and 3 times removal torque was measured on the abutment screws to investigate the difference in 10 coated and 10 non-coated abutment screws. Results : The results indicated that the implants with DLC coating group were not more resistant to the applied force in screw loosening. At 32Ncm, the 3 times removal torque in DLC group were $27.75{\pm}2.89,\;25.85{\pm}2.35$ and $26.2{\pm}2.57$. The removal torque in no-coated abutment screws were $27.85{\pm}4.23,\;27.35{\pm}2.81$ and $27.9{\pm}2.31$, respectively. Conclusion : The lubricant layer used in this study was Diamond Like Carbon(DLC) and it have a properties of hard and stable layer. The DLC coating layer was hard enough to prevent distortion of screws in the repeated unscrewing procedure in clinical situation. The reduced friction coefficient in hard DLC layer was not effective to prevent screw loosening.

• Journal of Periodontal and Implant Science
• /
• v.40 no.5
• /
• pp.232-238
• /
• 2010

Purpose: To prolong the degradation time of collagen membranes, various cross-linking techniques have been developed. For cross-linking, chemicals such as formaldehyde and glutaraldehyde are added to collagen membranes, but these chemicals could adversely affect surrounding tissues. The aim of this study is to evaluate the ability of porous non-chemical cross-linking porcine-derived collagen nanofibrous membrane to enhance bone and associated tissue regeneration in one-wall intrabony defects in beagle dogs. Methods: The second and third mandibular premolars and the first molars of 2 adult beagles were extracted bilaterally and the extraction sites were allowed to heal for 10 weeks. One-wall intrabony defects were prepared bilaterally on the mesial and distal side of the fourth mandibular premolars. Among eight defects, four defects were not covered with membrane as controls and the other four defects were covered with membrane as the experimental group. The animals were sacrificed 10 weeks after surgery. Results: Wound healing was generally uneventful. For all parameters evaluating bone regeneration, the experimental group showed significantly superior results compared to the control. In new bone height (NBh), the experimental group exhibited a greater mean value than the control ($3.04{\pm}0.23\;mm/1.57{\pm}0.59$, P=0.003). Also, in new bone area (NBa) and new bone volume (NBv), the experimental group showed superior results compared to the control (NBa, $34.48{\pm}10.21%$ vs. $5.09{\pm}5.76%$, P=0.014; and NBv, $28.04{\pm}12.96$ vs. $1.55{\pm}0.57$, P=0.041). On the other hand, for parameters evaluating periodontal tissue regeneration, including junctional epithelium migration and new cementum height, there were no statistically significant differences between two groups. Conclusions: Within the limitations of this study, this collagen membrane enhanced bone regeneration at one-wall intrabony defects. On the other hand, no influence of this membrane on periodontal tissue regeneration could be ascertained in this study.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.526-532
• /
• 2013

The effect of CNT dispersion method on rheological and electrical properties of polystyrene/carbon nanotube (PS/CNT) nanocomposites via latex technology was compared. The nanocomposites were prepared through freeze-drying the dispersed suspension comprised of CNTs and PS particles. In this study, physical dispersion method, either sodium dodecylsulfate (SDS) addition or polyvinyl pyrrolidone (PVP) wrapping, was employed to prevent the deterioration of intrinsic properties of CNT caused by chemical modification. The physical method applied to latex technology was very effective in CNT dispersion. With SDS addition, the enhancement of rheological properties was low compared to PVP wrapping because the properties of matrix were deteriorated due to the incorporation of low molecular weight SDS. The electrical percolation threshold of PS/SDS-stabilized CNT and PS/PVP-wrapped CNT nanocomposites was 0.23 and 0.90 wt%, respectively. The enhancement of electrical conductivity was low in the case of PVP wrapping because the non-conducting PVPs wrapped around CNT restricted the electrical connection between CNTs.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.28-33
• /
• 2013

Zaltoprofen, a propionic acid derivative non-steroidal anti-inflammatory drug, was known to have powerful inhibitory effects on acute, subacute and chronic inflammation. For initial release and sustained release, the microspheres were prepared using an emulsion-solvent evaporation method like an O/W emulsion method with varying the ratio of zaltoprofen-loaded polyoxalate (POX)/PLGA micropheres. The morphology of the microspheres was confirmed by scanning electron microscopy. The crystallinity of microspheres was analyzed by X-ray diffraction and differential scanning calorimeter. Fourier transform infrared spectroscopy was used to analyze the chemical structure of microspheres. The increased ratio of POX microspheres affected the initial drug release, and the sustained release of drug was influenced by ratio of PLGA microspheres. In this study, the initial release behavior of zaltoprofen can be controlled by the ratio of POX/PLGA microspheres.

• Food Science and Preservation
• /
• v.23 no.7
• /
• pp.1042-1049
• /
• 2016

This study was conducted to investigate and compare the characteristics of acetic acid fermentation in detoxified Rhus verniciflua vinegar (DRV) produced by different yeast strains. The DRVs were prepared by static acetic acid fermentation using six different yeast strains (Saccharomyces cerevisiae Fermivin, Pichia kudriavzerii N77-4, Hanseniaspora pountiae HP1-2, Candida tropicalis Y447, Wickerhamomyces anomalus N43-8, and Pichia kluyveri Frootzen). Alcohol content of the S. cerevisiae Fermivin fermented DRV was highest 16.07%. Among the yeast strain DRVs, there were significant differences in alcohol content, but all alcohol levels were 11%. Moreover, there were differences in pH and titratable acidity of the DRVs. The organic acid content of the DRVs ranged from 35.88 to 55.49 mg/mL and there were significant differences among the yeast strain DRVs. Essential free amino acids, particularly glutamic acid, alanine, leucine and valine, were detected in each of the 6 DRVs. Electronic nose analysis revealed that three different volatile chemical patterns were present in the 6 DRVs. The results indicate that yeast strains with different characteristics can produce vinegars with different characteristics.

• Food Science and Preservation
• /
• v.23 no.7
• /
• pp.1004-1011
• /
• 2016

Flavonoids, non-nutrient secondary metabolites of plants, are widely distributed in commonly consumed agro-food resources. Flavonoids include aglycones, and their glycosides are reported to have potential health-promoting compounds. The aim of this study was to investigate flavonoid glycosides in the fruit and leaves of Zizyphus jujuba var. inermis (Bunge) Rehder (jujube). A total of six flavonoids (five flavonols and one chalcone) were identified in jujube fruit and leaves by using ultra-performance liquid chromatography-diode array detector-quadrupole time of flight mass spectrometry along with chemical library and an internal standard. In positive ion mode, six flavonoids were linked to the C- and O-glycosides which were conjugated with sugar moieties based on kaempferol, quercetin, and phloretin aglycones. Total flavonoid contents of leaves (8,356.5 mg/100 g dry weight (DW)) was approximately 900-fold higher than that of fruit (fresh fruit, 13.6 mg/100 g dry DW; sun-dried fruits, 9.2 mg/100 g dry DW). Quercetin 3-O-rutinoside (rutin) and quercetin 3-O-robinobioside were the predominant flavonols in fruit and leaves of jujube. In particular, rutin had the highest content (6,735.2 mg/100 g DW) in leaves, and rutin is a widely reported bioactive compound. Phloretin 3',5'-di-C-glucoside (chalcone type) was detected only in leaves. The leaves of jujube contain a high content of flavonoids and the results of this study indicate that jujube leaves may be a source of bioactive flavonoids.

• Korean Journal of Food Science and Technology
• /
• v.19 no.1
• /
• pp.29-37
• /
• 1987

The native myosin and paramyosin extracted from the ordinary muscle of yellowtail (Seriola quinqueradita) and the adductor muscle of whelk (Neptunea arthritica cumingi) were studied for their physico-chemical characteristics. Molecular weight, molar extinction coefficient at 278 nm and intrinsic viscosity were accounted for $4.6{\times}10^5$dalton, 5.44 in $E^{1cm}_{1%}$ and 1.60 dl/g in yellowtail myosin, and $2.0{\times}10^5$ dalton, 3.04 in $E^{1cm}_{1%}$ and 2.60 dl/g in whelk paramyosin, respectively. Yellowtail myosin showed a $0.342\;{\mu}mole-Pi/min/mg-protein$ of ${Ca}^{2+}-ATPase$ activity and contained 40 group-SH/mole-myosin. The ratio of polar amino acids to non-polar amino acids and that of acidic amino acids to basic amino acids were 0.54 and 1.64 in yellowtail moysin, and were 0.47 and 2.42 in whelk paramyosin, respectively.

• Korean Journal of Food Science and Technology
• /
• v.44 no.6
• /
• pp.722-727
• /
• 2012

In order to improve the physical properties of brown rice by hydration and cooking, the amount of water absorption, hardness, reducing sugar, and minerals were measured for rice (NR), brown rice (NBR), and scratched brown rice (SBR). The amounts of water absorption were present in the order of NBR<0.07 SBR<0.20 SBR=NR after 210 min. The moisture contents of gelatinization rice were significantly different by degree of milling and scratch. The hardness of gelatinization rice were present in the order of NR<0.20 SBR<0.07 SBR

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.665-670
• /
• 2020

Buffer layer in CIGS thin-film solar cells improves energy conversion efficiency through band alignment between the absorption layer and the window layer. ZnS is a non-toxic II-VI compound semiconductor with direct-transition band gaps and n-conductivity as well as with excellent lattice matching for CIGS absorbent layers. In this study, the structural and optical properties of ZnS thin films, deposited by RF magnetron sputtering method and subsequently performed by the rapid thermal annealing treatment, were investigated for the buffer layer. The zincblende cubic structures along (111), (220), and (311) were shown in all specimens. The rapid thermal annealed specimens at the relatively low temperatures were polycrystalline structure with the wurtzite hexagonal structures along (002). Rapid thermal annealing at high temperatures changed the polycrystalline structure to the single crystal of the zincblende cubic structures. Through the chemical analysis, the zincblende cubic structure was obtained in the specimen with the ratio of Zn/S near stoichiometry. ZnS thin film showed the shifted absorption edge towards the lower wavelength as annealing temperature increased, and the mean optical transmittance in the visible light range increased to 80.40% under 500℃ conditions.

• Economic and Environmental Geology
• /
• v.50 no.3
• /
• pp.251-256
• /
• 2017

This study presents measures to enhance the efficiency of Successive Alkalinity Producing Systems(SAPS), a natural biological purification method that prevents environmental pollution arising from the release of Acid Mine Drainage(AMD) from abandoned mines into rivers and groundwater. The treatment of AMD using SAPS is based on biological processing technology that mostly involves sulfate reducing bacteria(SRB). It has been proven effective in real-world applications, and has been employed in various projects on the purification of AMD. However, seasonal decrease in temperature leads to a deterioration in the efficiency of the process because sulfate-reducing activity is almost non-existent during cold winters and early spring even if SRB is able to survive. Against this backdrop, this study presents measures to enhance the activity of the SRB of the organic layer by integrating light emitting diode(LED)s in SAPS and to maintain the active temperature using LEDs in cold winters. Given that mine drainage facilities are located in areas where power cannot be easily supplied, solar cell modules are proposed as the main power source for LEDs. By conducting further research based on the present study, it will be possible to enhance the efficiency of AMD treatment under extreme cold weather using solar energy and LEDs, which will serve as an environmentally-friendly solution in line with the era of green growth.