• The korean journal of orthodontics
• /
• v.17 no.2
• /
• pp.289-297
• /
• 1987

For the comparisons of dental archs and crowdings between musical wind instrument players groups and non-wind instrument players groups, 64 male wind instrument players and 31 non-wind instrument players group were selected. The results of the measurements were as follow. 1 Upper intercanine widths, upper basal arch widths, lower basal arch widths were statistically significant between musical wind instrument players groups (Class A, Class B) and non-wind musical instrument players group. 2 The mean value of upper intercanine width m Class A ($373{\pm}2.3mm$) was greater than than in Class B ($362{\pm}17mm$) and non-wind musical instrument players group($360{\pm}16mm$) 3 The mean value of lower basal arch width m Class B ($422{\pm}25mm$) was greater than that in non wind instrument players group ($395{\pm}28mm$). 4 The differences in the mean values of crowdings between Class A and Class Band non-wind instrument players group were not statistically significant.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.277-280
• /
• 2003

It was investigated that the "ㄱ" type angle product could be bended with a curvature during extrusion by extru-bending process. The bending process for the "ㄱ" type angle product can be developed by the hot metal extru-bending machine with the two punches moving in the different velocity. Because of non-symmetry of product, it is important to design the ruled surface contour of dies cavity for the welding and bending with two billets. So it is designed that the multi-hole container has two non-symmetric holes and non-symmetric contour of dies entrance. The results of the experiment show that "ㄱ" type angle product can be bended by the extrusion process and that the curvature of the product can be controlled by the velocity of punch and that the defects such as the distortion of section and the thickness change of the product and the folding and wrinkling of the product did not happen after the bending processing by the extrusion bending machine.

• Korean Management Science Review
• /
• v.32 no.4
• /
• pp.29-43
• /
• 2015

Word-of-Mouth (WOM), which is the unpaid spread of a positive marketing message from person to person, has been shown to be even more effective in influencing purchase decisions than traditional advertising channels. The effects of WOM might be different by types of persuaders (purchasers vs. non-purchasers), however, the current body of research has not given attention to the differential effects of WOM. This study focuses on whether or not potential customers are influenced by the WOM from non-purchasers as well as from purchasers, and it investigates if the impacts of WOM from non-purchasers are different with those from purchasers. Based on conjoint analyses, it concludes that potential customers are affected by the communication with non-purchasers as well as with purchasers but the impacts of non-purchasers are not greater than those of purchasers.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.344-352
• /
• 1993

The purpose of this study is to investigate the possibility of the non-destructive quality evaluation for food by the acoustic non-linear parameter B/A which is a measure of the non-linearity of the state equation of the medium in terms of pressure and density. The B/A of water, corn oil O/W(oil in water) emulsion and milk were measured by using a sound velocity measuring system. The B/A value of water was measured for ascertaining reliability of our experimental system. Corn oil W/W emulsion was prepared as a model of milk . It was proved that the B/A value of O/W emulsion was related to the oil concentration by a law of mixture. We applied this result to milk and obtained satisfactory results for predicting the milk fat concentration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10B
• /
• pp.1419-1427
• /
• 2001

본 논문은 연속영상에서 non-rigid object를 자동으로 분할하고 알고리즘을 제안하였다. Non-rigid object는 형태의 변화가 일정하기 않은 object로서 기존의 분할 알고리즘과는 다른 새로운 분할 알고리즘을 필요로 한다. 본 논문에서는 특히 구름이나 연기와 같이 형태의 변화가 큰 non-rigid object를 자동으로 분할하는 알고리즘을 제안하였다. 제안된 알고리즘은 공간분할, 시간분할, 그리고 공간분할과 시간분할의 결합의 세 가지 단계로 구성되어 있다. 공간분할은 영상에서 픽셀의 intensity를 마코프 랜덤 필드로 가정하고 에너지 최소화를 통해 영상을 분할한다. 시간분할은 속도벡터를 기반으로 하여 움직임이 있는 영역만을 분할한다. 마지막으로 공간분할과 시간분할을 결합하여 non-rigid object의 최종적인 분할을 수행한다. 실험결과, 제안된 알고리즘은 연속영상에서 non-rigid object를 자동으로 분할함을 확인할 수 있었다.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.4
• /
• pp.413-418
• /
• 2001

The change of crystalline structure and mechanical properties of drawn PP filaments which was treated by tensioned and non-tensioned annealing was investigated. Measurements were carried out with XRD for crystallite size, density gradient tube for crystallinity. and UTM for mechanical properties. Tensioend and non-tensioned annealing were carried out $80^{\circ}C$, $100^{\circ}C$, $120^{\circ}C$: for 10min., 30min., 60min, in oil bath. It was found that the crystallinity and crystallite size of (110) plane of samples were increased with increasing of annealed temperature and time. Also crystallinity and crystallite size of samples which was tensioned annealing were larger than those of non-tensioned annealed samples. Initial modulus and tensile strength of tensioned annealed samples were higher than non-tensioned annealed samples, But elongation of tensioned annealed samples was lower than non-tensioned annealed samples.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.319-324
• /
• 2001

Free non-linear vibration of a rotating thin ring with a constant speed is analyzed when the ring has both the in-plane and out-of-plane motions. The geometric non-linearity of displacements is considered by adopting the Lagrange strain theory for the circumferential strain. By using Hamilton's principle, the coupled non-linear partial differential equations are derived, which describe the out-of-plane and in-plane bending, extensional and torsional motions. The natural frequencies are calculated from the linearized equations at various rotational speeds. Finally, the computation results from three non-linear models are compared with those from a linear model. Based on the comparison, this study recommends which model is appropriate to describe the non- linear behavior more precisely.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.19 no.2
• /
• pp.72-82
• /
• 2008

The aim of this paper is to evaluate the use of non-stimulants, including atomoxetine, bupropion and modafinil, as alternative approaches to the treatment of children with attention-deficit hyperactivity disorder. A comprehensive review of the empirically based literature regarding the efficacy and the safety of the non-stimulants was performed. There is a large and increasing body of data supporting the efficacy and the safety of non-stimulants. Although the treatment effect sizes for non-stimulants may be smaller than those for stimulants, non-stimulants alone have been shown to be effective in the treatment of attention-deficit hyperactivity disorder as well as several comorbidities. These results suggest that non-stimulants are effective in the treatment of attention-deficit hyperactivity disorder. Further studies are needed to improve our understanding of alternative pharmacological medications in the treatment of attention-deficit hyperactivity disorder.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.10 no.3
• /
• pp.47-52
• /
• 2010

This study aims to compare the Malevich's 'non-objectivity' and Mies van der Rohe's 'almost nothing'. K. Malevich who, as a painter, was a pioneer of abstract art and an initiator of Suprematism, was sought an ultimate value of art to non objective world, namely non of consciousness or a world of a non-being, In the same way, 'Mies van der Rohe was also sought for architectural space of non objectivity, as non of objective, being introduced 'less is more' or 'almost nothing' to architectural space.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.6
• /
• pp.109-115
• /
• 2001

This paper investigates the mechanical characteristics of angle-ply laminates with non-woven carbon tissue. The lami- nates were made by inserting non-woven carbon tissue at the interface. Specimens were rounded near the tabs by grinding and polishing to reduce the stress concentration. Cyclic loads were applied to the specimens and the stress and fatigue life curves were obtained. The matrix crack density was also evaluated to check the effects of non-woven carbon tissue on the fracture resistance of composite laminates. C-Sean technique was used to evaluate the delamination, and SEM was used to understand the fracture mechanisms of the laminates. Experimental results show that the fatigue strength and life of composite laminates were increased by inserting non- woven carbon tissues. The results also show that the matrix crack density and delamination area were reduced by inserting non-woven carbon tissues.