• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.98-101
• /
• 2019

In this paper, we propose the power-based pipelined-forwarding MAC protocol which can select relay nodes according to the residual power and energy harvesting rate in EH-WSN (energy-harvesting wireless sensor networks). The proposed MAC follows a pipelined-forwarding scheme in which nodes repeatedly sleep and wake up in an EH-WSN environment and data is continuously transmitted from a high-level node to a low-level node. The sleep interval is adaptively controlled so that nodes with low energy harvesting rate can be charged sufficiently, thereby minimizing the transmission delay and increasing the network lifetime. Simulation shows that the proposed MAC protocol improves the balance of residual power and network lifetime.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.810-819
• /
• 2010

This paper proposes an algorithm to improve total network lifetime for Wireless Sensor Network (WSN) application such as environmental condition monitoring systems based on LEACH protocol. Firstly, the algorithm had equal number of nodes allocated to each cluster at cluster set-up phase where it abided by LEACH protocol. Secondly, at cluster set-up phase, each node was determined the order to be cluster header of the cluster which it had joined. After then, the role of a cluster head delivers to the next node according to determined order when the cluster head has received certain number of packets. With above method energy consumption of each node made equal and overall network lifetime was increased. Simulation results shows that overall network lifetime of proposed algorithm was increased two times than that of LEACH and total energy consumption was one forth of that of LEACH protocol.

• Journal of Communications and Networks
• /
• v.13 no.1
• /
• pp.17-25
• /
• 2011

A convergecast is a popular routing scheme in wireless sensor networks (WSNs) in which every sensor node periodically forwards measured data along configured routing paths to a base station (BS). Prolonging lifetimes in energy-limited WSNs is an important issue because the lifetime of a WSN influences on its quality and price. Low-energy adaptive clustering hierarchy (LEACH) was the first attempt at solving this lifetime problem in convergecast WSNs, and it was followed by other solutions including power efficient gathering in sensor information systems (PEGASIS) and power efficient data gathering and aggregation protocol (PEDAP). Our solution-chain routing with even energy consumption (CREEC)-solves this problem by achieving longer average lifetimes using two strategies: i) Maximizing the fairness of energy distribution at every sensor node and ii) running a feedback mechanism that utilizes a preliminary simulation of energy consumption to save energy for depleted Sensor nodes. Simulation results confirm that CREEC outperforms all previous solutions such as LEACH, PEGASIS, PEDAP, and PEDAP-power aware (PA) with respect to the first node death and the average lifetime. CREEC performs very well at all WSN sizes, BS distances and battery capacities with an increased convergecast delay.

• Journal of Communications and Networks
• /
• v.16 no.4
• /
• pp.371-377
• /
• 2014

Localized topology control is attractive for obtaining reduced network graphs with desirable features such as sparser connectivity and reduced transmit powers. In this paper, we focus on studying how to prolong network lifetime in the context of localized topology control for wireless multi-hop networks. For this purpose, we propose an energy efficient localized topology control algorithm. In our algorithm, each node is required to maintain its one-hop neighborhood topology. In order to achieve long network lifetime, we introduce a new metric for characterizing the energy criticality status of each link in the network. Each node independently builds a local energy-efficient spanning tree for finding a reduced neighbor set while maximally avoiding using energy-critical links in its neighborhood for the local spanning tree construction. We present the detailed design description of our algorithm. The computational complexity of the proposed algorithm is deduced to be O(mlog n), where m and n represent the number of links and nodes in a node's one-hop neighborhood, respectively. Simulation results show that our algorithm significantly outperforms existing work in terms of network lifetime.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.860-863
• /
• 2010

Wireless sensor networks consist of small, autonomous devices with wireless networking capabilities. In order to further increase the applicability in real world applications, minimizing energy consumption is one of the most critical issues. Therefore, accurate energy model is required for the evaluation of wireless sensor networks. In this paper, we analyze the energy consumption for wireless sensor networks. To estimate the lifetime of sensor node, we have measured the energy characteristics of sensor node based on Telosb platforms running TinyOS. Based on the proposed model, the estimated lifetime of a battery powered sensor node can use about 6.925 months for 10 times motion detection per hour.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.11
• /
• pp.1550-1553
• /
• 2020

In this paper, we maximize the lifetime of a multi-hop path through a cooperative wireless energy sharing scheme between constituent nodes in a wireless multi-hop communication. Considering a bidirectional multi-hop communication environment, we present an optimization problem to maximize path lifetime by adjusting the amount of energy each node needs to share with its neighboring nodes. On the basis of solidarity property, i.e., the lifetime of the multi-hop path is maximized when the lifetimes of all nodes are the same, we convert the considered optimization problem into a linear programming problem and solve it easily. Simulation result shows that the proposed two-way wireless energy sharing method maximizes the path lifetime of multi-hop communications and approximately doubles the path lifetime compared with the one-way energy sharing method.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.461-472
• /
• 2007

In Ubiquitous Sensor Network (USN), the sensor nodes are required to consume their energy evenly to prolong the lifetime of the entire sensor network because of the limited energy of the sensor node. AODV which is applied to USN as routing protocol selects route according to only the shortest distance of the minimum hop count but regardless of the remaining battery power for each node. Thus it comes to ill-balanced power consumption seriously. In this paper, a scheme that controls packet relay quantity of each sensor node adaptively to prevent traffic overhead at a certain node and to increase the entire network lifetime is proposed. As it is analyzed by simulations, the proposed scheme enhances USN lifetime by balancing each sensor node's packet relay quantity.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.55-65
• /
• 2010

We present a method for increasing network lifetime without link failure due to lack of battery capacity of nodes in wireless ad-hoc networks with low mobility. In general, a node with larger remaining battery capacity represents the one with lesser traffic load. Thus, a modified AODV routing protocol is proposed to determine a possible route by considering a remaining battery capacity of a node. Besides, the total energy consumption of all nodes increase rapidly due to the huge amount of control packets which should be flooded into the network. To reduce such control packets efficiently, a source node can store information about alternative routes to the destination node into its routing table. When a link failure happens, the source node should retrieve the route first with the largest amount of the total remaining battery capacity from its table entries before initiating the route rediscovery process. To do so, the possibility of generating unnecessary AODV control packets should be reduced. The method proposed in this paper increases the network lifetime by 40% at most compared with the legacy AODV and MMBCR.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2000.11a
• /
• pp.97-101
• /
• 2000

Energy consumption is considered as a principal ingredient in mobile wireless ad-hoc networks. In such a network, most of mobile nodes takes a role in forwarding messages received from neighbor nodes. Energy of these nodes is consumed in different rates depending on message traffic routes. This paper proposes a scheme to balance routing energy consumption by transferring routing function from node with small residual energy to node with enough residual energy. This scheme requires additional local message transfer, increasing the energy consumption of nodes to transfer routing function, and increasing total energy consumption of ad-hoc network. But balancing of energy consumption make the system lifetime the longer and increase the average node lifetime.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.469-472
• /
• 2008

Hierarchical routing in Wireless Sensor Network lowers the amount of a memory used and energy consumption so that the network lifetime longer. But, When Node Failure is occurred, Hierarchical routing do not look for another route. This is the problem of Hierarchical routing. To solve the problem, we would study other hierarchical routings. There are typically hierarchical routing protocols which can be used in WSN, such as the hierarchical routing of Zigbee and HiLow protocol which is submitted as draft to IETF 6LoWPAN WG. Also, there is SCRO algorithm which be able to assign short-cut routing path. This paper explains how to solve the Node Failure in each Zigbee hierarchical routing and HiLow protocol. And we suggest how to solve the Node Failure in SCRO protocol. SCRO protocol is able to assign new routing path rapidly when Node Failure is occurred. Because the strong of SCRO protocol is to assign Short-cut routing path.