• Steel and Composite Structures
• /
• v.26 no.4
• /
• pp.463-471
• /
• 2018

The bolted end-plate beam-column connections have been widely used in steel structure and composite structure because of its excellent seismic performance. In this paper, the end-plate bolted connection is applied in the concrete structure, A new-type of fabricated beam-column connections with end-plates is presented, and steel plate hoop is used to replace stirrups in the node core area. To study the seismic behavior of the joint, seven specimens are tested by pseudo-static test. The experimental results show that the new type of assembly node has good ductility and energy dissipation capacity. Besides, under the restraint effect of the high-strength stirrup, the width of the web crack is effectively controlled. In addition, based on the analysis of the factors affecting the shear capacity of the node core area, the formula of shear capacity of the core area of the node is proposed, and the theoretical values of the formula are consistent with the experimental value.

• The KIPS Transactions:PartC
• /
• v.10C no.3
• /
• pp.377-386
• /
• 2003

This study suggested a technique to maintain an efficient core-based multicast tree using weighted clustering factors in mobile Ad-hoc networks. The biggest problem with the core-based multicast tree routing is to decide the position of core node. The distance of data transmission varies depending on the position of core node. The overhead's effect on the entire network is great according to the recomposition of the multicast tree due to the movement of core node, clustering is used. A core node from cluster head nodes on the multicast tree within core area whose weighted factor is the least is chosen as the head core node. Way that compose multicast tree by weighted clustering factors thus and propose keeping could know that transmission distance and control overhead according to position andmobility of core node improve than existent multicast way, and when select core node, mobility is less, and is near in center of network multicast tree could verification by simulation stabilizing that transmission distance is short.

• Structural Engineering and Mechanics
• /
• v.74 no.3
• /
• pp.395-406
• /
• 2020

Many prefabricated concrete frame joints have been proposed, and most of them showed good seismic performance. However, there are still some limitations in the proposed fabricated joints. For example, for prefabricated prestressed concrete joints, prefabricated beams and prefabricated columns are assembled as a whole by the pre-stressed steel bar and steel strand in the beams, which brings some troubles to the construction, and the reinforcement in the core area of the joints is complex, and the mechanical mechanism is not clear. Based on the current research results, a new type of fabricated joint of prestressed concrete beams and confined concrete columns is proposed. To study the seismic performance of the joint, the quasi-static test is carried out. The test results show that the nodes exhibit good ductility and energy dissipation. According to the experimental fitting method and the "fixed point pointing" law, the resilience model of this kind of nodes is established, and compared with the experimental results, the two agree well, which can provides a certain reference for elasto-plastic seismic response analysis of this type of structure. Besides, based on the analysis of the factors affecting the shear capacity of the node core area, the formula of shear capacity of the core area of the node is proposed, and the theoretical values of the formula are consistent with the experimental value.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.5
• /
• pp.2398-2415
• /
• 2017

Content-Centric Networking (CCN) is a new Internet architecture with routing and caching centered on contents. Through its receiver-driven and connectionless communication model, CCN natively supports the seamless mobility of nodes and scalable content acquisition. In-network caching is one of the core technologies in CCN, and the research of efficient caching scheme becomes increasingly attractive. To address the problem of unbalanced cache load distribution in some existing caching strategies, this paper presents a neighbor cooperation based in-network caching scheme. In this scheme, the node with the highest betweenness centrality in the content delivery path is selected as the central caching node and the area of its ego network is selected as the caching area. When the caching node has no sufficient resource, part of its cached contents will be picked out and transferred to the appropriate neighbor by comprehensively considering the factors, such as available node cache, cache replacement rate and link stability between nodes. Simulation results show that our scheme can effectively enhance the utilization of cache resources and improve cache hit rate and average access cost.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.1109-1112
• /
• 2020

This paper presents a low cost hardware message passing engine of enhanced atomic pipelined broadcast based on processing node status. In this algorithm, the previous atomic pipelined broadcast algorithm is modified to reduce the waiting time until next broadcast communication. For this, the processor change the transmission order of processing nodes based on the nodes' communication channel. Also, the hardware message passing engine architecture of the proposed algorithm is modified to be adopted to multi-core processor. The synthesized logic area of the proposed hardware message passing engine was reduced by about 16%, compared by the pre-existing hardware message passing engine.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.362-364
• /
• 2011

To build ubiquitous agriculture environment successfully, development of core technology for agriculture, such as sensor node H/W, sensor node middleware platform, routing protocol and agricultural environment application service is essential. With the application of u-IT technologies to traditional agriculture area, fusion complex technologies become a source to raise value-added agriculture product and its productivity. However, it is imperative to expand horticulture industry area and improve infrastructure for utility-based horticulture. This paper proposes an agriculture product growth environment management system that utilizes environmental factor monitoring sensors and biological information sensors in greenhouse to specifically manage botany growth environment management.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.728-737
• /
• 2011

For the real time monitoring and tracking of shipping container which is one of the core objects for global logistics, Wireless Ad-Hoc Network technology might be needed in stacking environments such as ports, yards and ships. In this paper, we propose a container network routing protocol suitable for port or yard stacking environments which include some constraints such as shadow area problem from metal material, frequent movement of container, etc. With this protocol in which a mesh network algorithm is applied, every container data packet can be delivered to the sink node reliably even with frequent join/leave of container nodes. As soon as a node on path gets malfunction, alternative backup path is supported with notice to neighbor node, which makes constant total optimal path. We also verified that the performance of proposed protocol is better than AODV, one of previous major MANet(Mobile Ad-Hoc Network) protocol with a function for alternative path, which says the proposed protocol is better for frequent join/leave and variable link quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.788-794
• /
• 2007

The policy of US DoD is moving towards implementation of Network Centric Warfare(NCW) concepts. NCW is commonly described as the integration and synchronization of four key interdependent elements such as command and control, sensor system, engagement systems and the network. Therefore the military policy of Korea military is needed to access and examine the policy of NCW communication environment and crypto communication, which is able to apply it. In this case study, We are reviewed the security framework of the concept of network centric warfare in the centering around the US. It is introduced the core technology in the network centric warfare, and it is reviewed the security framework such as, the requirements of security, the characteristics security of global information grid, joint tactical radion system, net centric enterprise services, transformational communication satellite, in the basis of core technology, and analysis the effect of crypto communication relay between command node and surbornate node in NCW environment. This report support the assistance, which is considered the elements of surrounding effects in the varied crypto communication research area of NCW.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.4 s.310
• /
• pp.15-22
• /
• 2006

Nowadays, there is called energy saving, that it is accomplished with a lot study and application development as according to demand of all around world. It is using to network device of wire or wireless such as internet, lan, plc, and zigbee and that we should be accomplished to study about method that spending a little cost to fatal error in control system that be expected of frequent occurrence on network, and that have method to do construction a little bit tried out. Also, in that such a embedded system with network function case, there is important thing that it is remote management to network node and control methods to trust because firmware upgrade have the advantage of more than the other device. In this paper, we have verified through a result of experiment for efficient remote management and control method as previously stated in this paper, that it is area of the PLC for sensor node and doing management to relay, and implementation of the LACC which is core part of the ESS, and in order to get a result to trust from doing analysis of capacity and test.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.47-52
• /
• 2017

In this paper, CMOS SAR A/D converter 1.8V supply for the design of an A/D converter having an middle speed for the biological signal processing was designed. This paper proposes design of a 10-bit SAR Analog to Digital Converter improving linearity driven by MSB node of C-DAC array divided into 4 equal parts. It enhances linearity property, by retaining the analog input signal charging time at MSB node. Because MSB node samples analog input, it enhances resolution through getting initial input signal precisely. By using split capacitor on C-DAC array, it reduced chip size and power dissipation. The Proposed SAR A/D Converter is fabricated in 0.18um CMOS and measured 7.5 bits of ENOB at sampling frequency 4MS/s and power supply of 1.8V. It occupies a core area of $850{\times}650um^2$ and consumes 123.105uW. Therefore it results in 170.016fJ/step of FOM(Figure of Merit).