• Steel and Composite Structures
• /
• v.37 no.2
• /
• pp.211-227
• /
• 2020

To explore the feasibility of eliminating the longitudinal rebars and stirrups by using ultra-high-performance fiber reinforcement concrete (UHPFRC) in concrete encased steel composite stub column, compressive behavior of UHPFRC encased steel stub column has been experimentally investigated. Effect of concrete types (normal strength concrete, high strength concrete and UHPFRC), fiber fractions, and transverse reinforcement ratio on failure mode, ductility behavior and axial compressive resistance of composite columns have been quantified through axial compression tests. The experimental results show that concrete encased composite columns with NSC and HSC exhibit concrete crushing and spalling failure, respectively, while composite columns using UHPFRC exhibit concrete spitting and no concrete spalling is observed after failure. The incorporation of steel fiber as micro reinforcement significantly improves the concrete toughness, restrains the crack propagation and thus avoids the concrete spalling. No evidence of local buckling of rebars or yielding of stirrups has been detected in composite columns using UHPFRC. Steel fibers improve the bond strength between the concrete and, rebars and core shaped steel which contribute to the improvement of confining pressure on concrete. Three prediction models in Eurocode 4, AISC 360 and JGJ 138 and a proposed toughness index (T.I.) are employed to evaluate the compressive resistance and post peak ductility of the composite columns. It is found that all these three models predict close the compressive resistance of UHPFRC encased composite columns with/without the transverse reinforcement. UHPFRC encased composite columns can achieve a comparable level of ductility with the reinforced concrete (RC) columns using normal strength concrete. In terms of compressive resistance behavior, the feasibility of UHPFRC encased steel composite stub columns with lesser longitudinal reinforcement and stirrups has been verified in this study.

• Journal of Periodontal and Implant Science
• /
• v.38 no.3
• /
• pp.535-542
• /
• 2008

Purpose: The aim of this retrospective study is to evaluate survival rate of implant and bone formation, to analyze failure contribution factor. Material and Methods: A total of 52 consecutive patients(35 male, 17 female, mean age 49 years) with 104 osseous defects were treated during the period from October 2004 to June 2007 with a simultaneous or staged GBR approach using non-resorbable or resorbable membranes combined with autogenous bone grafts or xenograft(Bio-Oss, Bio-cera, BBP). Result: A total of 32(30,8%) of 104 GBR-treated sites failed the bone formation and a total of 5(5.6%) of 89 implants were removed. Early exposure of the membrane has significantly affected bone formation(p<0.05). Non-resorbable membrane showed more exposure of the membrane and low success rate of bone formation than resorbable membrane(p<0.05). There were no difference between success rate of bone formation and using autogenous bone or graft materials. There were no statistically significant difference between success rate of bone formation and smoking or using PRP. Mandible showed more success rate of bone formation than maxilla(p<0.05). Conclusion: Early exposure of the membrane, membrane type and maxilla/mandible type have influence on success rate of bone formation during GBR.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.2
• /
• pp.158-163
• /
• 2013

Cross laminated timber (CLT) has been an rising issue as a promising building material replacing steel-concrete in mid story rise construction. But, there was no specific standard for CLT because it had been developed in industrial section. Recently, new draft for requirements of CLT was proposed by EN which suggested to evaluate the performance of adhesive in CLT by the same method as glulam. But, it has been reported that shear performance of cross laminated timber is governed by rolling shear. Therefore, block shear tests were carried out to compare parallel to grain laminating and cross laminating using commercial one component PUR (Poly urethane resin). The result showed that the current glulam standard for evaluating bonding performance is not appropriate for CLT. Beacause shear strength of cross laminating decreased to 1/3 of parallel to grain laminating and this strength was representing shear performance of wood itself not the bond. However, cross laminating showed no significant effect on wood failure. Thus, wood failure can be used as a requirement of CLT bonding. Based on the results, cross laminating effect should be included when evaluating adhesive performance of CLT correctly and should be considered as an important factor.

• Journal of Chest Surgery
• /
• v.21 no.4
• /
• pp.619-629
• /
• 1988

The increasing number of replacement of the substitute cardiac valves were seen in these 2 years. Out of a total 1,408 patients with cardiac valve replacement, 54 required replacement of the substitute valves. Fifty-nine substitute valves replaced were 43 in mitral, 14 in aortic and 2 in tricuspid positions; and they were 36 Ionescu-Shiley, 15 Hancock and 3 Angell-Shiley bioprosthetic valves and 3 St. Jude Medical and 2 Bjork-Shiley prosthetic valves. Primary tissue failure was the most frequent reason of replacement[38 patients] followed by paravalvular leak[9 patients], prosthetic valve endocarditis[6 patients] and valve thrombosis[1 patient] in order. The most pronounced pathology of the failed xenograft valves seen in the primary tissue failure group was calcification and fixation of the cusps with or without tear and defect of the cuspal tissue. The operative mortality rate was 7.4%. Fifty early survivors were followed up for a total of 82.6 patient-years and there was no late death. Actuarial survival rate was 92.3*3.8% at 6 years after surgery. Although the definite tendency toward early and accelerated degeneration of the xenograft valves has been seen in patients younger than 20 to 25 years of age, no strict age limit from where the tissue failure slows down could be determined. The requirement of the ideal substitute valves would be the durability of the recently developed mechanical prostheses armed with the low thrombogenicity of the bioprostheses. At the present time, the need of compromise in selection between less thrombogenic bioprosthetic and more durable mechanical valves should be stressed. The difficulty in choice is yet important in patients of middle age and children where the use of homograft valves may be one of the solution despite of certain limitations from sociomedical reasons.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.22 no.2
• /
• pp.181-188
• /
• 2019

Purpose: Inadequate calorie intake is one of the most important causes of nonorganic failure to thrive (NOFTT) and is thought to lead to multiple micronutrient deficiencies. However, there have been few studies on NOFTT and micronutrients. The aim of this study was to evaluate the micronutrient status of children with NOFTT. Methods: We conducted a retrospective cohort study in 161 children (106 with NOFTT and 55 health controls) at a single institution. Data on weight for age, height for age, body mass index, and biochemical parameters, indicating the children's nutritional and micronutrient status were reviewed via electronic medical records, and the two groups were compared. Results: Except inorganic phosphate levels, no statistically significant differences were seen in the laboratory findings indicating the children's nutritional and micronutrient status; notably, the inorganic phosphate levels were within the normal range in both groups. We then compared the severe NOFTT (weight for age below the first percentile) and control groups; however, no statistically significant differences were seen for any of the measured parameters. Conclusion: Most children with NOFTT in this study had normal micronutrient levels and other laboratory findings. Therefore, element deficiencies should not be considered a natural consequence of NOFTT or in healthy children. Close monitoring and additional evaluations are needed.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.7
• /
• pp.83-92
• /
• 2022

In this paper, we designed an algorithm that can control the state of PM by learning the chain failure pattern of PHM based air conditioning facility. It is an inevitable spread of PM due to the downtime caused by the failure of the air conditioning facility. The algorithm developed by us is to establish a PM management system through PHM, and it is an algorithm that maintains a constant stabilization state through learning the stop/operation pattern of the air conditioner and manages PM based on this. As a result of the simulating at a subway station for the performance qualification of the algorithm, it was verified that the concentration of PM reduces by 30% on average. In the case of stations with many passengers using the subway, the concentration of PM exceeded the Ministry of Environment Standards(100 ㎍/m³), but it was verified that the concentration of PM was improved at all stations where the simulation was conducted. In the future research is to expand the system to comprehensively manage not only PM but also pollutants such as CO₂, CO, and NO₂ in subway stations.

• Tuberculosis and Respiratory Diseases
• /
• v.85 no.3
• /
• pp.227-236
• /
• 2022

Background: The use of low-dose inhaled corticosteroid-formoterol as reliever monotherapy has recently been recommended in the asthma treatment guidelines. However, the efficacy of this treatment strategy has not yet been determined during the stepping-down period in moderate asthma. This study aimed to evaluate the feasibility of reducing treatment to as-needed budesonide-formoterol (BFM) in moderate asthma with complete remission. Methods: We randomly assigned 31 patients (8 males and 23 females with a mean age of 57.2 years) with complete remission of asthma by inhaled BFM (160/4.5 ㎍) twice daily to receive BFM (160/4.5 ㎍) as needed (16 patients), or budesonide (BUD) (200 ㎍) twice daily (15 patients). The study was an open-label study done for 48 weeks, with the primary outcome as the cumulative percentages of patients with treatment failure (asthma exacerbation or loss of asthma control or lack of satisfaction after using medications) in the two groups. Results: Six patients (42%) using as-needed BFM had treatment failure, as compared with three patients (21.4%) using BUD maintenance (hazards ratio for as-needed BFM, 1.77; 95% confidential interval, 0.44-7.12; p=0.41). The changes in forced expiratory volume in 1 second were -211.3 mL with as-needed BFM versus -97.8 mL with BUD maintenance (difference, 113.5 mL; p=0.75) and the change in fractional exhaled nitric oxide was significantly higher in both groups, at 8.68 parts per billion (ppb) in the as-needed BFM group and 2.5 ppb. in the BUD maintenance group (difference, 6.18 ppb; p=0.049). Conclusion: Compared with BUD maintenance, there were no significant differences in treatment failure rate in patients who received as-needed BFM during the stepping down period in moderate asthma. However, they showed reduced lung function and relapsed airway inflammation. The results are limited by imprecision, and further large RCTs are needed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.1
• /
• pp.1-12
• /
• 1995

For the purpose of this study, the silicoating on Ni-Cr-Be alloy surface was carried out by using the Silicoater MD. The effect of time delay after silicoating on the bond strength between the metal and resin cement was examined. The groups were divided into 4 : group 1 : Sandblasted with $250{\mu}m$ aluminium oxide, immediatly cemented group 2 : Sandblasted with $250{\mu}m$ aluminium oxide, silicoated and immediatly cemented group 3 : Sandblasted with $250{\mu}m$ aluminium oxide, silicoated and cemented after 7 days group 4 : Sandblasted with $250{\mu}m$ aluminium oxide, silicoated and coated with unfilled resin and cemented after 7 days Specimens were luted with Comspan, Superbond C&B or Panavia EX. The tensile bond strength between the metal and resin cement was measured by using the universal testing machine. The results were as follows : 1. The bond strength in groups 2, 3 and 4 was higher than that of group 1 (p<0.05). There was no statistically significant difference among the bond strength in groups 2, 3 and 4 (p>0.05). 2. In Comspan-cemented groups, there was no significant difference among the bond strength in groups 2, 3 and 4 (p<0.05). 3. In Panavia EX-cemented groups, the bond strength of group 3 was higher than that of group 2 (p<0.05) and there was no significant difference between groups 3 and 4. 4. In Superbond C&B-cemented groups, there was significant difference between groups 2 and 3 (p<0.05) and the bond strength of group 4 was higher than that of group 3 (p<0.05). 5. The highest tensile bond strength was obtained by using the Superbond C&B and no difference in the Panavia EX and Comspan. 6. The modes of bond failure were mainly cohesive failure. The method of storage and transport indicated in this study seems recommendable for laboratory and clinical use at least up to 7 days.

• Clinics in Shoulder and Elbow
• /
• v.21 no.1
• /
• pp.22-29
• /
• 2018

Background: This study is performed to evaluate anchor-related outcomes and complications after arthroscopic rotator cuff repair using 30% ${\beta}$-tricalcium phosphate (${\beta}$-TCP) with 70% poly lactic-co-glycolic acid (PLGA) biocomposite suture anchors. Methods: A total of 78 patients (mean age, $61.3{\pm}6.9years$) who underwent arthroscopic medium-to-large full-thickness rotator cuff tear repair were enrolled. The technique employed 30% ${\beta}$-TCP with 70% PLGA biocomposite suture anchors at the medial row (38 patients, Healix $BR^{TM}$ anchor [Healix group]; 40 patients, Fixone anchor B [Fixone group]). The radiologic outcomes (including perianchor cyst formation or bone substitution) and anatomical outcomes of the healing failure rate were evaluated using magnetic resonance imaging at least 6 months after surgery, the pain visual analogue scale at 3, 6 months, and final follow-up visit, and American Shoulder and Elbow Surgeons scores at least 1 year postoperatively. Anchor-related complications were also evaluated. Results: The perianchor cyst formation incidence was similar for both groups (60.5%, Healix group; 60.0%, Fixone group; p=0.967), although severe perianchor cyst incidence was slightly lower in the Fixone group (15.0%) than in the Healix group (21.1%). There was no occurrence of anchor absorption and bone substitution. No differences were observed in the healing failure rate (13.2%, Healix group; 15.0%, Fixone group; p=0.815) and functional outcome between groups (all p>0.05). Anchor breakage occurred in 5 patients (2 Healix anchors and 3 Fixone anchors); however, there were no major anchor-related complications in either group. Conclusions: No differences were observed in the clinical outcomes of the Healix and Fixone groups, neither were there any accompanying major anchor-related complications.

• Korean Journal of Radiology
• /
• v.22 no.6
• /
• pp.901-911
• /
• 2021

Objective: To evaluate the technical applicability of a semiautomatic three-dimensional (3D) hybrid CT segmentation method for the quantification of right ventricular mass in patients with cardiovascular disease. Materials and Methods: Cardiac CT (270 cardiac phases) was used to quantify right ventricular mass using a semiautomatic 3D hybrid segmentation method in 195 patients with cardiovascular disease. Data from 270 cardiac phases were divided into subgroups based on the extent of the segmentation error (no error; ≤ 10% error; > 10% error [technical failure]), defined as discontinuous areas in the right ventricular myocardium. The reproducibility of the right ventricular mass quantification was assessed. In patients with no error or < 10% error, the right ventricular mass was compared and correlated between paired end-systolic and end-diastolic data. The error rate and right ventricular mass were compared based on right ventricular hypertrophy groups. Results: The quantification of right ventricular mass was technically applicable in 96.3% (260/270) of CT data, with no error in 54.4% (147/270) and ≤ 10% error in 41.9% (113/270) of cases. Technical failure was observed in 3.7% (10/270) of cases. The reproducibility of the quantification was high (intraclass correlation coefficient = 0.999, p < 0.001). The indexed mass was significantly greater at end-systole than at end-diastole (45.9 ± 22.1 g/m² vs. 39.7 ± 20.2 g/m², p < 0.001), and paired values were highly correlated (r = 0.96, p < 0.001). Fewer errors were observed in severe right ventricular hypertrophy and at the end-systolic phase. The indexed right ventricular mass was significantly higher in severe right ventricular hypertrophy (p < 0.02), except in the comparison of the end-diastolic data between no hypertrophy and mild hypertrophy groups (p > 0.1). Conclusion: CT quantification of right ventricular mass using a semiautomatic 3D hybrid segmentation is technically applicable with high reproducibility in most patients with cardiovascular disease.